The simulation of various rock properties based on three-dimensional digital cores plays an increasingly important role in oil and gas exploration and development. The accuracy of 3D digital core reconstruction is important for determining rock properties. In this paper, existing 3D digital core-reconstruction methods are divided into two categories: 3D digital cores based on physical experiments and 3D digital core stochastic reconstructions based on two-dimensional (2D) slices. Additionally, 2D slice-based digital core stochastic reconstruction techniques are classified into four types: a stochastic reconstruction method based on 2D slice mathematical-feature statistical constraints, a stochastic reconstruction method based on statistical constraints that are related to 2D slice morphological characteristics, a physics process-based stochastic reconstruction method, and a hybrid stochastic reconstruction method. The progress related to these various stochastic reconstruction methods, the characteristics of constructed 3D digital cores, and the potential of these methods are analysed and discussed in detail. Finally, reasonable prospects are presented based on the current state of this research area. Currently, studies on digital core reconstruction, especially for the 3D digital core stochastic reconstruction method based on 2D slices, are still very rough, and much room for improvement remains. In particular, we emphasize the importance of evaluating functions, multiscale 3D digital cores, multicomponent 3D digital cores, and disciplinary intersection methods in the 3D construction of digital cores. These four directions should provide focus, alongside challenges, for this research area in the future. This review provides important insights into 3D digital core reconstruction.
The saturation of a shale gas reservoir is used to characterize the fluid content within the pores and to calculate the free gas content and reserves of the reservoir. Thus, accurately evaluating the saturation of a shale gas reservoir is of great significance. However, little research has been performed to quantitatively evaluate the saturation relative to other parameters used for evaluating the gas content. Moreover, because the conductive mechanism of shale gas reservoirs is very complex, the existing electric saturation model is insufficient. In this paper, based on the results of our analysis, we postulate that the organic pores in shale gas reservoirs are full of gas; furthermore, clastic pores also contain some gas. Thus, an improved model based on the original petrophysical model and the theory of shale density characteristics is proposed, and a calculation scheme based on the saturation model of shale gas reservoirs is deduced. The simulation results indicate that the improved model is less sensitive than the original model to changes in the total organic carbon content (TOC), and the water saturation calculated when the TOC is equal to 0 can be less than 100%, which is more consistent with the actual geological conditions of shale gas reservoirs. Because the saturation model incorporates an exceedingly large number of parameters, we propose the use of a genetic algorithm to automatically optimize those parameters. An evaluation of the Longmaxi formation-Wufeng formation shale gas reservoir in the Yongchuan block of the southern Sichuan Basin reveals that the optimized parameters are consistent with the geological conditions. The prediction accuracy of the proposed method is also higher than that of the original method, especially for the Wufeng formation, for which the number of samples is very small. Moreover, the absolute error is reduced by nearly 10%, which reflects a high accuracy. The proposed model can enhance accuracy through further improving the determination of shale gas reservoir characteristics and thus has the potential to be improved further. This method can also partially resolve problems by evaluating the saturation of shale gas reservoirs and hence could be helpful for core and well logging evaluations of the saturation, especially in overmature shales.
9 February 2023 in Geoenergy Science and Engineering
Porosity, total organic carbon content, brittle mineral content, and gas content are now the primary references for classifying and evaluating marine shale gas reservoirs in China. Is there a more effective and appropriate reservoir classification scheme for deep marine shale? The Longmaxi Formation in Luzhou, southern Sichuan Basin, China, is the main object of study. Quantitative analysis and modeling using data from field emission scanning electron microscopy, nitrogen adsorption, and logging were used to characterize organic matter (OM) pore multi-scale development and reveal the relationship between OM pore and the high-quality reservoirs. Microscopic and macroscopic indications from OM pores show that a large number of OM pores were developed in high-quality reservoirs. OM surface porosity occupancy of the high-quality reservoir in the Luzhou area was more than 60%. OM porosity occupancy was more than 50%. The nitrogen adsorption–desorption hysteresis loops demonstrate the development of bottleneck and wedge-shaped OM pores. Characterization of multi-scale pore structure by box dimension, pore volume and specific surface area. It is found that the key to the formation of high-quality reservoirs was the massive development of OM mesopores in siliceous shale and the relatively homogeneity structure, which was conducive to the enrichment and migration of shale gas. Furthermore, the improved model decreased the relative error in predicting the OM porosity by about 32.5%. The use of OM porosity occupancy for high-quality reservoir classification was better, and the results were consistent with geological understanding. OM porosity occupancy showed that the area from Lunanxi to Luzhou to Rongchang to Jiangjin was the key exploration area for high-quality reservoirs in southern Sichuan. This study is expected to provide a new idea for OM pore modeling analysis and deep marine shale gas reservoir classification.
Hydrothermal fluid is one of the factors controlling Archean buried hill reservoirs in Bozhong 19-6. However, there are no clear studies focusing on the influence of hydrothermal alteration products and their lithological characteristics on reservoirs. Through characterization of the alteration reservoir and construction of a new subtraction model of the logging-rock mechanical alteration degree, the comprehensive uses of core, thin section, and electrical imaging logging data are considered as the research objects with metamorphic and igneous rocks. Thus, the relationship between lithologies with different alteration degrees and reservoir quality is revealed. The study shows that feldspar chloritization and sericitization are the main factors controlling the hydrothermal alteration of the reservoir; the overall alteration degree of igneous rocks is high, and the overall alteration degree of metamorphic rocks is low; the reservoir with strongly altered igneous facies is prone to forming dissolution pores, with strong reservoir inhomogeneity and poor reservoir performance (alteration degree is greater than 15%); the reservoir with weakly altered metamorphic facies is prone to developing fractures and a high reservoir productivity (alteration degree is 0); The reservoirs with altered metamorphic facies are numerous in the formation, spatially diverse in type, and second in reservoir quality only to those in the weakly altered metamorphic facies (alteration degree of 0–15%). This method is expected to provide a reference for quickly finding advantageous reservoirs in the Bohai Sag.