The charging and discharging process of batteries generates a significant amount of heat, which can adversely affect their lifespan and safety. This study aims to enhance the performance of a lithium-ion battery (LIB) pack with a high discharge rate (5C) by proposing a combined battery thermal management system (BTMS) consisting of improved phase change materials (paraffin/aluminum composite) and forced-air convection. Battery thermal performance is simulated using computational fluid dynamics (CFD) to study the effects of heat transfer and flow parameters. To evaluate the impact of essential parameters on the thermal performance of the battery module, temperature uniformity and maximum temperature in the cells are evaluated. For the proposed cooling system, an ambient temperature of 24.5 °C and the application of a 3 mm thick paraffin/aluminum composite showed the best cooling effect. In addition, a 2 m/s inlet velocity with 25 mm cell spacing provided the best cooling performance, thus reducing the maximum temperature. The paraffin can effectively manage thermal parameters maintaining battery temperature stability and uniformity. Simulation results demonstrated that the proposed cooling system combined with forced-air convection, paraffin, and metal foam effectively reduced the maximum temperature and temperature difference in the battery by 308 K and 2.0 K, respectively.

The battery thermal management system (BTMS) for lithium-ion batteries can provide proper operation conditions by implementing metal cold plates containing channels on both sides of the battery cell, making it a more effective cooling system. The efficient design of channels can improve thermal performance without any excessive energy consumption. In addition, utilizing phase change material (PCM) as a passive cooling system enhances BTMS performance, which led to a hybrid cooling system. In this study, a novel design of a microchannel distribution path where each microchannel branched into two channels 40 mm before the outlet port to increase thermal contact between the battery cell and microchannels is proposed. In addition, a hybrid cooling system integrated with PCM in the critical zone of the battery cell is designed. Numerical investigation was performed under a 5C discharge rate, three environmental conditions, and a specific range of inlet velocity (0.1 m/s to 1 m/s). Results revealed that a branched microchannel can effectively improve thermal contact between the battery cell and microchannel in a hot area of the battery cell around the outlet port of channels. The designed cooling system reduces the maximum temperature of the battery cell by 2.43 °C, while temperature difference reduces by 5.22 °C compared to the straight microchannel. Furthermore, adding PCM led to more uniform temperature distribution inside battery cell without extra energy consumption.