16 January 2025 in Scientific Reports
Recovering the remaining oil after primary and secondary extraction methods poses a significant challenge. Enhanced oil recovery (EOR) techniques, which involve injecting fluids into reservoirs, aim to increase recovery rates. Ionic liquids, known for their adaptability, are emerging as promising agents in EOR, improving oil displacement by reshaping fluid properties and interacting with reservoir rocks. This study investigates the eco-friendly amino acid ionic liquid, AAIL [G0.5 C12][Pro], for EOR applications, focusing on its characterization and performance. Using pre-prepared quaternary ammonium salt PAMAM G0.5 C12 and proline, AAIL [G0.5 C12][Pro] was synthesized and confirmed via FTIR and 1H-NMR analyses. Rheological analysis identified 7 g of AAIL [G0.5 C12][Pro] as the optimal concentration for peak performance. Laboratory sand-pack displacement experiments demonstrated an 11% increase in oil recovery at this concentration. Further, a 3D reservoir model simulation validated the enhanced oil recovery potential of AAIL [G0.5 C12][Pro]. The study introduces the novel amino acid ionic liquid [G0.5 C12][Pro], which demonstrates superior effectiveness in enhancing oil recovery through significant wettability modification and interfacial tension reduction, underscoring its potential as an effective and environmentally friendly EOR agent compared to other ionic liquids and conventional methods.
1 May 2026 in Scientific Reports
Carbon dioxide enhanced oil recovery (CO 2 -EOR) offers dual benefits of increasing hydrocarbon production and sequestering anthropogenic CO 2 ; however, conventional CO 2 flooding suffers from unfavorable mobility ratios and premature gas breakthrough, while polymer flooding alone faces challenges in high-salinity and high-temperature reservoirs. This study experimentally and numerically investigates the synergistic impact of combining xanthan gum polymer with CO 2 injection to maximize oil recovery. We conducted laboratory coreflood experiments on packed sandstone (porosity 22%, permeability 1000 mD) saturated with 31°API crude oil (6.0 cP at 70 °C), testing polymer concentrations of 1.0, 1.5, 2.0, and 2.5 g/L. We evaluated five flooding scenarios: water flooding (baseline), CO 2 flooding alone, polymer flooding alone, polymer (1.5 g/L) followed by CO 2 , and CO 2 followed by polymer (1.5 g/L). We then upscaled experimental findings using CMG-IMEX reservoir simulator to field scale. Water flooding recovered 70.0% of original oil in place (OOIP). CO 2 flooding alone increased recovery to 83.3% OOIP. Polymer flooding alone achieved maximum recovery of 81.3% OOIP at optimal concentration (1.5 g/L), while lower (1.0 g/L) and higher (2.5 g/L) concentrations yielded 79% and 73.5% OOIP, respectively. Sequential injection significantly outperformed single methods: polymer (1.5 g/L) followed by CO 2 achieved 89.3% OOIP, while CO 2 followed by polymer (1.5 g/L) achieved the highest recovery of 94.3% OOIP. An incremental gain of 24.3% over water flooding and 11.0% over CO 2 flooding alone. The combined polymer-CO 2 flooding system delivers superior oil recovery compared with individual processes. The optimal strategy-CO 2 injection followed by 1.5 g/L xanthan gum polymer-maximizes both microscopic displacement efficiency (CO 2 -driven oil swelling and viscosity reduction) and macroscopic sweep efficiency (polymer-driven mobility control). This hybrid approach represents a technically viable and economically promising EOR strategy for mature sandstone reservoirs while contributing to sustainable carbon management.
30 April 2026 in Scientific Reports
Petroleum engineers must accurately determine bubble point pressure (Pb) to optimize oil field development from discovery to abandonment. Errors in predicting this parameter can lead to inaccurate reservoir and production estimates. To enhance Pb predictions, A total of experimentally measured 1,161 oil samples from Egyptian oil reservoirs (604 heavy oil and 557 light oil) were used for regression analysis. In contrast, 232 datasets were used to support the artificial neural network model. Existing correlations for Egyptian crude oils of varying oil gravity demonstrated moderate accuracy, highlighting the need for improved estimation methods tailored to local reservoir conditions. This study revises existing literature correlations, which previously related Pb to reservoir temperature, flashed gas specific gravity, gas-oil ratio, and stock tank oil API gravity. In contrast, this work develops two new correlation models: one tailored for heavy oils (15.3 < API < 34.9) and another for light oils (35.6 < API < 53.1), providing improved accuracy for these distinct oil types. These models incorporate a compositional approach, emphasizing fluid composition and physical parameters for enhanced precision. The equations were revised using multiple linear regression analysis, resulting in a statistical coefficient of 99.08% for heavy oils and 96.49% for light oils. Additionally, Artificial Neural Network (ANN) models were trained on a comprehensive dataset to develop highly accurate mathematical models for predicting bubble point pressure.