Murat MISIR

Dr. Murat MISIR

Chemical Engineering, Ahi Evran University, Kırşehir, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
SYSevil S. Yilmaz
Sevil S. Yilmaz
NYNuri Yildirim
Nuri Yildirim
MMMurat MISIR
Murat MISIR
YMYasin Misirlioglu
Yasin Misirlioglu
ECEmre Celik
Emre Celik
Poly(acrylic acid/Kryptofix 23-Dimethacrylate) superabsorbent polymer [P (AA/Kry23-DM) SAP] was synthesized by solution polymerization to remove Co, Ni, Cu, Cd, Mn, Zn, Pb, Cr, and Fe ions in water and improve the quality of the water. Kry23-DM cross-linker (1,4,7,13,16-Pentaoxa-10,19 diazo cyclohexene icosane di methacrylate) was synthesized using Kry23 and methacryloyl chloride. The characterization of the molecules was done by FTIR, TGA, DSC, and SEM techniques. The effects of parameters such as pH, concentration, and the metal ion interaction on the heavy metal ions uptaking of SAP was investigated. It was observed that P (AA/Kry23-DM) SAP has maximum water absorption, and the absorption increases with the pH increase. Adsorption rates and sorption capacity, desorption ratios, competitive sorption (qcs), and distribution coefficient (log D) of P(AA/Kry23-DM) SAP were studied as a function of time and pH with the heavy metal ion concentration. Langmuir and Freundlich isotherms of the P (AA/Kry23-DM) SAP were investigated to verify the metal uptake. Molecular mechanic (MM2), Assisted Model Building with Energy Refinement (AMBER), and optimized potentials for liquid simulations (OPLS) methods. were used in quantum chemical calculations for the conformational analysis of the cross-linker and the SAP. ΔH0f calculations of the cross-linker and the superabsorbent were made using Austin Model 1(AM1) method.

7 May 2024 in Journal of Food Measurement and Characterization
Verified
Journal Article
Open access
PDF file
EDErsin Demir
Ersin Demir
MMMurat MISIR
Murat MISIR
IDIrem Dincer
Irem Dincer
NANida Aydogdu
Nida Aydogdu
J.G ManjunathaJ.G Manjunatha
J.G Manjunatha
Tert-butyl hydroquinone (TBHQ) is a member of the synthetic phenolic antioxidant family that prevents the formation of free radicals and prevents radicals from damaging cells by trapping them. In addition, TBHQ is widely preferred as an additive in foods and vegetable oils because of its low cost and high chemical stability. TBHQ is not only a food preservative but is also frequently used as a stabilizer to prevent auto-polymerization in cosmetics, biodiesel, pharmaceuticals, coating products, and different application areas. TBHQ has been shown to cause diseases, such as DNA damage, carcinogenesis, and cell apoptosis, when administered at high doses. Excessive consumption of TBHQ causes adverse effects, such as stomach tumors, liver damage, and underdevelopment of the reproductive system. Different analytical methods have been used to detect TBHQ in food samples. The most important of these methods are traditional analytical methods such as chromatographic and spectrophotometric methods. However, these methods have basic shortcomings such as high analysis costs, long pre-processing, expensive equipment, need for many organic solvents, requiring expertise, and long detection times. In recent years, electrochemical sensors have attracted attention in the scientific world owing to their high sensitivity, fast analysis time, portability, low cost, and convenience of miniaturization. This review discusses electrochemical studies performed to date for the determination of TBHQ in food samples. The methods used in these studies have been evaluated in a wide range of aspects, such as the electrode, working range, detection limits, and analytical applications.

18 September 2023 in Polymers
Verified
Journal Article
Open access
PDF file
MMMurat MISIR
Murat MISIR
SYSevil S. Yilmaz
Sevil S. Yilmaz
ABAhmet Bilgin
Ahmet Bilgin
Syntheses of novel bifunctional poly(methyl methacrylate) (PMMA)-, poly(styrene) (PS)-, and (poly ε-caprolactone) (PCL)-based atom transfer radical polymerization (ATRP) macroinitiators derived from p-xylene-bis(1-hydroxy-3-thia-propanoloxy) core were carried out to obtain ABA-type block copolymers. Firstly, a novel bifunctional ATRP initiator, 1,4-phenylenebis(methylene-thioethane-2,1-diyl)bis(2-bromo-2-methylpropanoat) (PXTBR), synthesized the reaction of p-xylene-bis(1-hydroxy-3-thia-propane) (PXTOH) with α-bromoisobutryl bromide. The PMMA and PS macroinitiators were prepared by ATRP of methyl methacrylate (MMA) and styrene (S) as monomers using (PXTBR) as the initiator and copper(I) bromide/N,N,N′,N″,N″-pentamethyldiethylenetriamine (CuBr/PMDETA) as a catalyst system. Secondly, di(α-bromoester) end-functionalized PCL–based ATRP macronitiator (PXTPCLBr) was prepared by esterification of hydroxyl end groups of PCL-diol (PXTPCLOH) synthesized by Sn(Oct)2–catalyzed ring opening polymerization (ROP) of ε-CL in bulk using (PXTOH) as initiator. Finally, ABA-type block copolymers, PXT(PS-b-PMMA-b-PS), PXT(PMMA-b-PS-b-PMMA), PXT(PS-b-PCL-b-PS), and PXT(PMMA-b-PCL-b-PMMA), were synthesized by ATRP of MMA and S as monomers using PMMA-, PS-, and PCL-based macroinitiators in the presence of CuBr/PMDETA as the catalyst system in toluene or N,N-dimethylformamide (DMF) at different temperatures. In addition, the extraction abilities of PCL and PS were investigated under liquid–liquid phase conditions using heavy metal picrates (Ag+, Cd2+, Cu2+, Hg2+, Pb2+, and Zn2+) as substrates and measuring with UV-Vis the amounts of picrate in the 1,2–dichloroethane phase before and after treatment with the polymers. The extraction affinity of PXTPCL and PXTPS for Hg2+ was found to be highest in the liquid–liquid phase extraction experiments. Characterizations of the molecular structures for synthesized novel initiators, macroinitiators, and the block copolymers were made by spectroscopic (FT–IR, ESI–MS, 1H NMR, 13C NMR), DSC, TGA, chromatographic (GPC), and morphologic SEM.


25 February 2025 in Topics in Catalysis
Verified
Journal Article
Open access
PDF file
MMMurat MISIR
Murat MISIR
ABAhmet Bilgin
Ahmet Bilgin
DDDoğukan Doyduk
Doğukan Doyduk
EDErsin Demir
Ersin Demir
In this study, a novel PCL-based polymer (6) containing A 3 B-type zinc phthalocyanine was synthesized as a result of the ring-opening polymerization of ε -caprolactone ( ε -CL), in which A 3 B-type zinc phthalocyanine (5) prepared by condensation method of two different phthalonitrile precursor molecules, 4-(3-hydroxypropylmercapto)phthalonitrile (3) and 4- tert -butylphthalonitrile (4) , in 3:1 molar ratios used as the initiator. (6) was synthesized in three stages; the synthesis of 4-(3-hydroxypropylmercapto)phthalonitrile (3) (i), novel A 3 B-type zinc phthalocyanine (ii), PCL-based polymer (6) containing A 3 B-type zinc phthalocyanine (iii). The novel compounds (5) and (6) were characterized by spectroscopic (FTIR, 1 H NMR. 13 C NMR and UV-vis), DSC and chromatographic (GPC) methods. After that, a new generation hybrid material (PcY-MWCNTP and PcX-MWCNTP) was developed by treating bare Pc (PcX) and polymer-based Pc (PcY) with carboxyl-functionalized multi-walled nanocarbon tube powders (COOH-MWCNTPs). This new nanomaterial was also coated on the glassy carbon electrode (GCE) surface using the drip-dry technique. The sensitivities of the developed both nanosensor in the determination of rifaximin were investigated at first time. Compared to the other electrode, PcX-MWCNTP/GCE significantly increased the anodic signal of rifaximin (approximately 5-fold) and shifted the peak potential to the less positive region. A wide working range from 0.25 mg/L to 10.0 mg/L was obtained, and the limit of detection (LOD) was calculated as 48 µg/L by differential pulse voltammetry (DPV). Finally, the electrochemical method was successfully applied analytically in natural samples to test its accuracy and precision by using PcX-MWCNTP/GCE.

29 August 2025 in Advanced Materials Interfaces
Verified
Journal Article
Open access
MMMurat MISIR
Murat MISIR
SMSaliha Mutlu
Saliha Mutlu
SBServin Bagheralmoosavi
Servin Bagheralmoosavi
BOBülend Ortaç
Bülend Ortaç
AKAli Karatutlu
Ali Karatutlu
SYSevil S. Yilmaz
Sevil S. Yilmaz
Pyrene‐functionalized poly(ɛ‐caprolactone) (Py(PCL)), poly(L‐lactide) (Py(PLLA)) homopolymers, and an AB‐type block copolymer (Py(PCL‐b‐PLLA)) are synthesized via ring‐opening polymerization (ROP) using Sn(Oct)2 catalyst with ɛ‐CL and L‐LA monomers. Structural characterization is confirmed by FTIR, 1H NMR, and XRD analyses, while thermal and optical properties are assessed using TGA, DSC, UV–vis, and photoluminescence spectroscopy. The polymers exhibited strong photoluminescence across 380–700 nm, high thermal stability, and nanostructured surface morphology as revealed by SEM and 3D laser microscopy. Biocompatibility is evaluated by culturing MCF‐7 breast cancer cells on polymer‐coated glass slides. The materials supported uniform cell distribution, robust adhesion, and sustained viability and proliferation. These results highlight the polymers’ suitability for tissue engineering and biomaterials research. The incorporation of pyrene units enabled intrinsic fluorescence tracking, positioning these polymers as multifunctional platforms for applications in cancer research, real‐time bioimaging, and regenerative medicine. By combining fluorescence capability with biodegradability and promotion of cell growth, Py(PCL), Py(PLLA), and Py(PCL‐b‐PLLA) offer a promising, environmentally friendly approach bridging imaging and therapeutic delivery needs in biomedical applications.