A low-profile antenna with three parasitic elements is designed and presented for fifth-generation (5G) and wireless metropolitan area network (WMAN) applications. This prototype covers the frequency range of 2.75–4.94 GHz, which is applicable for the lower 5G (3.33–4.2 GHz), WWAN n48 CBRS (US) (3.55–3.7 GHz), WiMAX rel 2 (3.4–3.6 GHz), n77 (3.3–4.2 GHz, most European and Asian countries), n78 (3.3–3.8 GHz, USA), and n79 (4.4–5.0 GHz, China, Hong Kong, Japan, and Russia) bands. The prototype is made of a low-loss, commercially available substrate material known as Rogers RT 5880 (εr = 2.2, tanδ = 0.0009) with a thickness of 0.79 mm. The optimized dimension of the proposed antenna is 35 × 25 × 0.79 mm3 (i.e., 691.25 mm3). The proposed 10-element array antenna is fed by a 50 Ω feeder. The maximum gain and directivity of the prototype antenna are 4.3 dB and 4.75 dBi, respectively. The radiation efficiency of the prototype varies from 86.79 to 92.14% (simulated) and from 86.23 to 91.48% (measured), and it is 89.48% (simulated) and 90.59% (measured) at 3.225 GHz. The impedance profile of the proposed 10-element array is (49.80-j1.72) Ω, which ensures good impedance matching. The VSWR and surface current of the low-profile antenna are 1.036 and 107.931 A/m at the center frequency of 3.225 GHz, respectively. The value of the scattering parameter (S11) is − 36 dB at the resonant frequency. By using a DGS-based partial ground plane and parasitic elements, it enhances bandwidth to 2.19 GHz. Therefore, the tested prototype is an excellent candidate to be deployed for 5G/WMAN applications with respect to the different presented parametric studies.
17 August 2023 in International Journal of RF and Microwave Computer-Aided Engineering
The WiFi-5 band was the most popular WiFi band until the Federal Communications Commission (FCC) announced a new spectrum of 6 GHz WiFi (5.925–7.125 GHz) for unlicensed users. Our proposed work is about to cover both the 5 GHz and 6 GHz WiFi bands. These two bands have a great impact in the wireless communication field. A low-loss Rogers RT 5880 material is used as the substrate layer, which helps us to make the antenna compact ( mm3) keeping a good performance profile over the latest high-speed WiFi-5/6 band. The proposed antenna covers a huge bandwidth (simulated BW: 2.85 GHz ranging from 4.50 to 7.35 GHz and measured BW: 2.83 GHz ranging from 4.50 to 7.33 GHz), which can be used for the latest WiFi-5 and WiFi-6 routers. The antenna also has omnidirectional properties. Besides that, the gain and directivity of the antenna are quite good, and the measured results buttress the simulated results. The presented different detail parametric studies indicate the antenna’s optimization level, which is excellent. The minimum values of reflection coefficient and voltage standing wave ratio make it a compatible candidate for the implementation of high-speed WiFi-5/6 routers.
30 May 2025 in International Journal of Soft Computing and Engineering
We describe a compact planar antenna for enhancing bandwidth, suitable for ultra-wideband devices like smartphones. In order to attain an ultra-wideband response of 6.5478GHz, the partial ground plane structure is applied to the suggested design in this paper. The total dimensions of the proposed antenna are 36× 30×0.79 mm3 (853.2 mm3 ). Throughout the whole frequency range of 2.782GHz to 9.3298GHz, (S11 ≤−10 dB), the antenna's gain and directivity vary from 2.30 dB to 3.72 dB and 2.59 dBi to 3.9 dBi, respectively. The suggested design's performance parameters exhibit a respectable return loss of -26. 983. The VSWR is 1<VSWR<2 across the entire band, and it is 1.087 at 3.33GHz. All of the significant requirements have been satisfied by the time domain and frequency domain analyses. The 2018 edition of the Computer Simulation Technology (CST) Microwave Studio Suite was used to carry out all of the characteristic parameters. This idea will encourage the development of high performance ultra-wideband antennas for 5G devices.