C Girish

C Girish

Auto-generated profile, based on publicly available information

C Girish


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2023 in Environmental Processes
Verified
Journal Article
Open access
PDF file
GJGautham Jeppu
Gautham Jeppu
CGC Girish
C Girish
BPBalakrishna Prabhu
Balakrishna Prabhu
KMKatharina Mayer
Katharina Mayer
Adsorption is an important phenomenon widely used for the removal of contaminants. Several drinking water contaminants such as arsenic and fluoride, vanadium and chromium, nickel, cadmium and cobalt are found to coexist in nature as multi-component mixtures in water. Hence, the modeling of multi-component adsorption isotherms for designing water treatment systems has gained importance recently. However, review studies of multi-component adsorption and competitive adsorption modeling are limited. The current review paper summarizes twenty-six multi-component adsorption isotherm models. Also, case studies of several common multi-component adsorption systems and the mechanisms of multi-component adsorption are discussed. Furthermore, a modeling analysis of four multi-component isotherms models for three commonly found two-component adsorption systems, i.e., cadmium-nickel, nickel–cobalt, and cadmium-cobalt, is reported. The Extended Langmuir isotherm, Competitive Langmuir isotherm, Extended Langmuir–Freundlich isotherm and Extended Freundlich isotherm models were applied in the modeling study for the competitive adsorption of Cd, Ni, and Co. The goodness of fit parameters and adsorption isotherm constants were estimated for these models. The factors influencing competitive adsorption, mechanisms of adsorption, various single and multi-component isotherm models, their significance, and limitations are also discussed in this review article. Highlights: • Twenty-six multi-component and ten single-component isotherm models are compiled • Factors affecting multi-component competitive adsorption isotherms are discussed in this review paper • The applications of four multi-component isotherm models for three binary contaminant systems are presented. Graphical

11 July 2025 in Chemical Papers
Verified
Journal Article
Open access
PDF file
CGChikmagalur Raju Girish
Chikmagalur Raju Girish
Numerous contaminants are released into the environment by industrial effluent. The pollutants have harmful effect on the environment and are required to be treated. Adsorption using activated carbon is one of the promising methods for removing the pollutants. Thermodynamic studies in adsorption play a significant role as it determines energy requirement and feasibility of the process. The significance of thermodynamic parameters, such as activation energy, isosteric heat of adsorption, DR model constants, enthalpy, Gibbs free energy and entropy, is studied. Its significance in the adsorption, its role in deciding the type of mechanism and nature of the process are reviewed in this paper.

24 November 2023 in Langmuir
Verified
Journal Article
Open access
AAAmrutha Acharya
Amrutha Acharya
GJGautham Jeppu
Gautham Jeppu
CGChikmagalur Raju Girish
Chikmagalur Raju Girish
BPBalakrishna Prabhu
Balakrishna Prabhu
Researchers have made significant efforts over the past few decades to understand adsorption by developing various simple adsorption isotherm models. However, though many contaminants usually occur as multicomponent mixtures in nature, multicomponent adsorption isotherms have received limited attention and remain an area of inadequate research. We have presented here in a new multicomponent adsorption isotherm model, named the Jeppu Amrutha Manipal Multicomponent (JAMM) isotherm, that can alleviate this problem. We first developed the JAMM multicomponent isotherm using our experimental data sets of arsenic and fluoride competitive adsorption on activated carbon. We then tested the JAMM multicomponent isotherm for a case study of cadmium and zinc competitive adsorption. Next, we further assessed the JAMM isotherm using another competitive adsorption case study of copper and chromium. Through extensive validation studies and error analysis, the JAMM isotherm was able to demonstrate its efficacy in predicting the adsorption behavior in several multicomponent adsorption systems accurately. The main advantage of JAMM isotherm over other multicomponent isotherms is that it utilizes and leverages the single-component adsorption parameters to simulate multicomponent isotherms. The proposed JAMM analytical isotherm model furthermore incorporates the interaction between the components, a mole fraction parameter, and a heterogeneity index, providing a more comprehensive modeling framework for multicomponent adsorption. The mole fraction term was introduced for the distribution of adsorption sites based on the relative number of molecules of each component. An additional term for interaction coefficient was introduced for the representation of interactions. During the validation of JAMM with three experimental case studies with negligible, small, and high competition systems of adsorbates, impressive predictions were exhibited, with the average normalized absolute percentage error as 6.05% and average R2 as 0.86, highlighting the model's robustness, versatility, and reliability. We propose that the new JAMM isotherm modeling framework might profoundly help in chemical engineering, environmental engineering, and materials science applications by providing a potent tool for analyzing and predicting multicomponent adsorption systems.

25 May 2024 in Heliyon
Verified
Journal Article
Open access
AAAmrutha Acharya
Amrutha Acharya
GJGautham Jeppu
Gautham Jeppu
CGChikmagalur Raju Girish
Chikmagalur Raju Girish
BPBalakrishna Prabhu
Balakrishna Prabhu
MRMurty Ramachandra
Murty Ramachandra
SRShrividya Ramesh
Shrividya Ramesh
The elevated co-occurrence of arsenic and fluoride in surface and groundwater poses risks to human health in many parts of the world. Using single and competitive batch equilibrium adsorption studies, this research focuses on As(V) and F adsorption by activated carbon and its modeling. BET, XRD, FESEM, EDS, and FTIR analysis were used to discern the structural characteristics of activated carbon. The influence of dosage, pH, and contact time were also investigated in single and simultaneous adsorption systems. The maximum adsorption capacity of activated carbon for arsenic and fluoride were found to be 3.58 mg/g and 2.32 mg/g, respectively. Kinetics studies indicated that pseudo-second-order kinetic model fit better than pseudo-first-order, Elovich, and intraparticle diffusion kinetic models. The non-linear regression analysis of Langmuir, Freundlich, Toth, Redlich Petersons, and Modified Langmuir Freundlich models was used to determine single-component asorption model parameters. Additionally, the simultaneous adsorption was rigorously modeled and compared using the Extended Langmuir (EL), Extended Langmuir Freundlich (ELF), Modified Competitive Langmuir (MCL), and Jeppu Amrutha Manipal Multicomponent (JAMM) isotherm models, and competitive mechanisms were interpreted for the simultaneous adsorption system. Further, the model performances were evaluated by statistical error analysis using the normalized average percentage error (NAPE), root mean square errors (RMSE), and the correlation coefficient (R2). According to the modeling results, single equilibrium data fitted better with the Modified Langmuir Freundlich isotherm model, with a higher R2 of 0.99 and lower NAPE values of 3.8 % and 1.28 % for As(V) and F, than other models. For the binary adsorption, the Extended Langmuir Freundlich isotherm model demonstrated excellent fit with lowest errors. All the competitive isotherm models fit the As(V) and F simultaneous sorption systems reasonably well. Furthermore, the research unveiled a nuanced hierarchy of isotherm fitting, with ELF > EL > MCL > JAMM in varying arsenic at a constant fluoride concentration, and ELF > JAMM > EL > MCL in varying fluoride at a constant arsenic concentrations. In addition, competitive studies divulged crucial insights into selective adsorption, as As(V) exhibits a pronounced adsorption selectivity over F on activated carbon. In essence, As(V) showed a more pronounced antagonistic behavior over F, whereas F exhibited a much lesser competitive behavior in the adsorption of arsenic.

5 April 2024 in Environmental Science and Pollution Research
Verified
Journal Article
Open access
PDF file
PPPraveengouda Patil
Praveengouda Patil
GJGautham Jeppu
Gautham Jeppu
MVManjunath Singanodi Vallabha
Manjunath Singanodi Vallabha
CGChikmagalur Raju Girish
Chikmagalur Raju Girish
The progress of industrial and agricultural pursuits, along with the release of inadequately treated effluents especially phenolic pollutant, has amplified the pollution load on environment. These organic compounds pose considerable challenges in both drinking water and wastewater systems, given their toxicity, demanding high oxygen and limited biodegradability. Thus, developing an eco-friendly, low-cost and highly efficient adsorbent to treat the organic pollutants has become an important task. The present investigation highlights development of a novel adsorbent (CFPAC) by activation of Cassia fistula pod shell for the purpose of removing phenol and 2,4-dichlorophnenol (2,4-DCP). The significant operational factors (dosage, pH, concentration, temperature, speed) were also investigated. The factors such as pH = 2 and T = 20°C were found to be significant at 1.6 g/L and 0.6 g/L dosage for phenol and 2,4-DCP respectively. Batch experiments were further conducted to study isotherms, kinetic and thermodynamics studies for the removal of phenol and 2,4-DCP. The activated carbon was characterised as mesoporous (specific surface area 1146 m2/g, pore volume = 0.8628 cc/g), amorphous and pHPZC = 6.4. At optimum conditions, the maximum sorption capacity for phenol and 2,4-DCP were 183.79 mg/g and 374.4 mg/g respectively. The adsorption isotherm was better conformed to Redlich Peterson isotherm (phenol) and Langmuir isotherm (2,4-DCP). The kinetic study obeyed pseudo-second-order type behaviour for both the pollutants with R2 > 0.999. The thermodynamic studies and the value of isosteric heat of adsorption for both the pollutants suggested that the adsorption reaction was dominated by physical adsorption (ΔHx < 80 kJ/mol). Further, the whole process was feasible, exothermic and spontaneous in nature. The overall studies suggested that the activated carbon synthesised from Cassia fistula pods can be a promising adsorbent for phenolic compounds. Graphical Abstract

29 August 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
BMBhojaraja Mohan
Bhojaraja Mohan
CGChikmagalur Raju Girish
Chikmagalur Raju Girish
GJGautham Jeppu
Gautham Jeppu
PPPraveengouda Patil
Praveengouda Patil
The quality evaluation of the activated carbon made from agricultural waste is investigated in the adsorption of phenol. Adsorbent was prepared through the activation of orthophosphoric acid, producing a structure that is porous with a surface area of 1090 m2/g. Elemental composition analysis confirmed that the carbon composition is 78.23%. X-ray photoelectron spectroscopy (XPS) and other characterizations were conducted to study the structural, chemical and thermal performance metrics. The results from the Boehm titration were aligned with the point of zero charge. Response Surface Methodology was used to optimize adsorption parameters. The adsorption outcomes demonstrated the effectiveness of phenolic removal, with the Langmuir isotherm under optimal conditions exhibiting a maximum adsorption capacity of 185.93 mg/g. The study on the kinetics of adsorption showed that they closely matched the second-order pseudo model (R2 > 0.98). Thermodynamic studies indicate that adsorption occurs spontaneously, as evidenced by negative ΔG° values. This further validates its exothermic nature and decreases randomness at the solid–liquid interface, as indicated by negative ΔH° and ΔS° values. The adsorbent regeneration and spiking studies were methodically examined. Activation energy and isosteric heat of adsorption were assessed. The adsorption mechanism is discussed thoroughly. These results highlight the effectiveness of activated carbon as a practical adsorbent for treating wastewater.