Meng Liu

Dr. Meng Liu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 September 2024 in Electronics
Verified
Journal Article
Open access
PDF file
MLMeng Liu
Meng Liu
XZXuan Zheng
Xuan Zheng
Low light extraction efficiency (LEE) remains a critical bottleneck in the performance of contemporary micro-light-emitting diodes (micro-LEDs). This study presents an innovative approach to improve the LEE of Gallium nitride (GaN)-based thin-film flip-chip (TFFC) micro-LEDs by integrating an inclined sidewall with photonic crystals (PhCs). Three-dimensional finite-difference time-domain (FDTD) simulations reveal that the inclined sidewall design significantly increases the escape probability of light, thereby improving LEE. Additionally, the PhCs’ structure further improves LEE by enabling more light to propagate into the escape cones through diffraction. Optimal results are achieved when the inclined sidewall angle (θ) is 28° and the PhCs exhibit a period (a) of 220 nm, a filling factor (f) of 0.8, and a depth (d) of 3 μm, resulting in a maximum LEE of 36.47%, substantially surpassing the LEE of conventional planar TFFC micro-LEDs. These results provide valuable design guidelines for the development of high-efficiency GaN-based micro-LEDs.

18 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
MLMeng Liu
Meng Liu
XZXu Zheng
Xu Zheng
XZXuan Zheng
Xuan Zheng
ZGZisu Gong
Zisu Gong
To fully utilize the advantages of Si3N4 and Silicon-On-Insulator to achieve a high-efficiency wideband grating coupler, we propose and numerically demonstrate a grating coupler based on Si3N4 and a Silicon-On-Insulator heterogeneous integration platform. A two-dimensional model of the coupler was established and a comprehensive finite difference time domain analysis was conducted. Focusing on coupling efficiency as a primary metric, we examined the impact of factors such as grating period, filling factor, etching depth, and the thicknesses of the SiO2 upper cladding, Si3N4, silicon waveguide, and SiO2 buried oxide layers. The calculations yielded an optimized grating coupler with a coupling efficiency of 81.8% (−0.87 dB) at 1550 nm and a 1-dB bandwidth of 540 nm. The grating can be obtained through a single etching step with a low fabrication complexity. Furthermore, the fabrication tolerances of the grating period and etching depth were studied systematically, and the results indicated a high fabrication tolerance. These findings can offer theoretical and parameter guidance for the design and optimization of high-efficiency and broad-bandwidth grating couplers.

1 January 2023 in Journal of Nanophotonics
Verified
Journal Article
Closed access
PDF file
MLMeng Liu
Meng Liu
XZXuan Zheng
Xuan Zheng
ZGZisu Gong
Zisu Gong
RGRenqi Gao
Renqi Gao
JLJuan Li
Juan Li
WLWenfei Liu
Wenfei Liu
We have proposed reticulated photonic crystals (PhCs) on the top surface of conventional light-emitting diodes (LEDs) to increase the light extraction efficiency (LEE). The rigorous electromagnetic simulations based on the three-dimensional finite-difference time-domain method were carried out to investigate the optical properties of reticulated PhCs LEDs and mechanisms of reticulated PhCs improving the LEE of LEDs. Results from these simulations showed that more than 115% enhancement of LEE had been achieved for LEDs with reticulated PhCs period of 200 nm and depth of 200 nm. This study provides an innovative approach to the creation of high-efficiency LEDs of the upcoming generation.

26 March 2026 in The Astrophysical Journal Supplement Series
Verified
Journal Article
Open access
GLGuanhong Lin
Guanhong Lin
DZDejia Zhou
Dejia Zhou
JZJianli Zhang
Jianli Zhang
RDRan Duan
Ran Duan
JDJialang Ding
Jialang Ding
XYXiaohui Yan
Xiaohui Yan
Fast radio bursts (FRBs) are extremely bright, millisecond-duration cosmic transients of unknown origin. The growing number of wide-field and high-time-resolution radio surveys, particularly with next-generation facilities such as the Square Kilometre Array and MeerKAT, will dramatically increase FRB discovery rates, but will also produce data volumes that overwhelm conventional search pipelines. Real-time detection thus demands software that is both algorithmically robust and computationally efficient. We present A stroflow , an end-to-end, GPU-accelerated pipeline for single-pulse detection in radio time–frequency data. Built on a unified C++/CUDA core with a Python interface, A stroflow integrates radio-frequency interference excision, incoherent dedispersion, dynamic-spectrum tiling, and a YOLO-based deep detector. Through vectorized memory access, shared-memory tiling, and OpenMP parallelism, it achieves >10× faster-than-real-time processing on consumer GPUs for a typical 150 s, 2048-channel observation—while preserving high sensitivity across a wide range of pulse widths and dispersion measures. These results establish the feasibility of a fully integrated, GPU-accelerated single-pulse search stack, capable of scaling to the data volumes expected from upcoming large-scale surveys. A stroflow offers a reusable and deployable solution for real-time transient discovery, and provides a framework that can be continuously refined with new data and models.

1 August 2023 in Journal of Nanoelectronics and Optoelectronics
Verified
Journal Article
Closed access
MLMeng Liu
Meng Liu
XZXuan Zheng
Xuan Zheng
ZGZisu Gong
Zisu Gong
JLJuan Li
Juan Li
WLWenfei Liu
Wenfei Liu
RGRenqi Gao
Renqi Gao
In this paper, a high efficiency grating coupler based on the Si thin film on Lithium Niobate (LiNbO3, LN) on insulator (LNOI) platform (Si-LNOI) was developed and analyzed. Two-dimensional finite-different time-domain (2D-FDTD) simulations were performed to optimize the grating structure. Those parameters (e.g., the layer thickness of SiO2, LNOI, and Si) and grating configuration were numerically investigated for the coupling efficiency. A coupling efficiency exceeding 98% at λ=1550 nm was obtained for TE polarization. Furthermore, the deviation tolerances of the grating period, the filling factor, the etching depth, and the layer thickness of the Si waveguide layer were studied systematically. The results indicated a high deviation tolerance. The grating coupler presented in this study could be achieved without adding fabrication steps other than etching, thereby showing high coupling efficiency and low fabrication complexity.

4 November 2025 in arXiv
Verified
Preprint
Open access
PDF file
GLGuanhong Lin
Guanhong Lin
DZDejia Zhou
Dejia Zhou
JZJianli Zhang
Jianli Zhang
JDJialang Ding
Jialang Ding
FLFei Liu
Fei Liu
PWPei Wang
Pei Wang
Fast radio bursts (FRBs) are extremely bright, millisecond duration cosmic transients of unknown origin. The growing number of wide-field and high-time-resolution radio surveys, particularly with next-generation facilities such as the SKA and MeerKAT, will dramatically increase FRB discovery rates, but also produce data volumes that overwhelm conventional search pipelines. Real-time detection thus demands software that is both algorithmically robust and computationally efficient. We present Astroflow, an end-to-end, GPU-accelerated pipeline for single-pulse detection in radio time-frequency data. Built on a unified C++/CUDA core with a Python interface, Astroflow integrates RFI excision, incoherent dedispersion, dynamic-spectrum tiling, and a YOLO-based deep detector. Through vectorized memory access, shared-memory tiling, and OpenMP parallelism, it achieves 10x faster-than-real-time processing on consumer GPUs for a typical 150 s, 2048-channel observation, while preserving high sensitivity across a wide range of pulse widths and dispersion measures. These results establish the feasibility of a fully integrated, GPU-accelerated single-pulse search stack, capable of scaling to the data volumes expected from upcoming large-scale surveys. Astroflow offers a reusable and deployable solution for real-time transient discovery, and provides a framework that can be continuously refined with new data and models.