Polymers are extensively used as advanced materials. The most commonly used polymers in industry are non-biodegradable and petroleum derived. The increasing demand for these types of polymers results in a problem of accumulation of plastic waste in the environment and depletion of fossil resources. Because of this point, the biodegradability of polymers gains great importance as well as for the bio-based polymers produced from renewable resources. In this study, bio-based polyamide 5.6 polymer (PA56) was incorporated with olive stone powder (OSP) in order to manufacture a biodegradable polyamide compound, and its degradability was investigated. The olive stone powder was incorporated into polyamide 5.6 at 10% (w/w) with a twin-screw extruder to manufacture the compound, PA56/OSP10. The characterization of the PA56/OSP10 compound was conducted using Fourier transform infrared (FTIR) spectroscopy. The biodegradability of the PA56/OSP10 compound was examined by a natural soil burial test of six months duration. The signs of degradation were assessed by both weight loss measurements and visual observations. At the end of six months, 5.24% weight loss and surface deformation were determined for the PA56/OSP10 compound. These results suggest that olive stone powder can be considered as a green alternative to conventional biodegradation additives for polymer compounding.

The extensive use of non-biodegradable and petroleum derived polymers in industry exacerbates environmental problems associated with plastic waste accumulation and fossil resource depletion. The most promising solution to overcome this issue is the replacement of these polymers with biodegradable and bio-based polymers. In this paper, novel biocomposites were prepared from bio-based polyamide 5.6 (PA56) with the addition of olive stone powder (OSP) at varying weight concentrations by melt compounding method. The degradability of the prepared biocomposites is investigated through soil burial test, and assessed by reduction in their mechanical properties. The biodegradability of bio-based polyamide 5.6 is shown to be improved by addition of olive stone powder, and its effects on the properties of polymer matrix are elucidated. The Fourier transform infrared (FTIR) spectrum of the biocomposites indicate the successful incorporation of OSP into PA56 polymer matrix. After six-month soil burial test, scanning electron microscopy and FTIR show the degradation of PA56 through morphological and structural changes, respectively. Differential scanning calorimetry reveals the changes in the transition temperatures of the polymer matrix and an increase in crystallinity. Thermogravimetric analysis is used on the biocomposite to determine the fraction of its components, polymer and biofiller, and the results show that 2.67% (w/w) of the polyamide 5.6 is biodegraded at the end of the six-month soil burial.