3D concrete printing (3DCP) requires precise adjustments to parameters to ensure accurate and high-quality prints. However, despite technological advancements, manual intervention still plays a prominent role in this process, leading to errors and inconsistencies in the final printed part. To address this issue, machine learning vision models have been developed and utilized to analyze captured images and videos of the printing process, detecting defects and deviations. The data collected enable automatic adjustments to print settings, improving quality without the need for human intervention. This work first examines various techniques for real-time and offline corrections. It then introduces a specialized computer vision setup designed for real-time control in robotic 3DCP. Our main focus is on a specific aspect of machine learning (ML) within this system, called speed control, which regulates layer width by adjusting the robot motion speed or material flow rate. The proposed framework consists of three main elements: (1) a data acquisition and processing pipeline for extracting printing parameters and constructing a synthetic training dataset, (2) a real-time ML model for parameter optimization, and (3) a depth camera installed on a customized 3D-printed rotary mechanism for close-range monitoring of the printed layer.
The use of conformal cooling channels (CCC) in the injection molding process has revolutionized the polymer industry by enhancing part cooling uniformity and improving cooling efficiency, minimizing undesired defects such as warpage and shrinkage inherent to the process. This review paper provides a detailed investigation of the literature on CCC, with special focus on how computational fluid dynamics (CFD) has been employed to analyze and optimize the thermal performance of the cooling system. Additionally, key aspects of CCC design, including geometry optimization, surface roughness, and flow dynamics, are evaluated to improve cooling efficiency, reduce cycle time, and enhance product quality. Several CFD-based studies are reviewed to highlight commonly used simulation methods and CCC optimization approaches for heat transfer enhancement. Particular attention is given to how simulation tools contribute to design improvement and decision-making, addressing practical constraints related to thermal behavior and manufacturability. Key performance parameters such as pressure drop, temperature uniformity, cooling time, and manufacturing limitations are examined and compared, offering a foundation for future directions to advance CCC design and CFD analysis to optimize injection molding. Aiming at contributing to the academia and the industry, the novelty of this review paper lies in its integrative perspective, providing a comprehensive analysis of coupling designing tasks with CFD simulations. As a result, this paper serves as a valuable resource for researchers and industry professionals aiming to leverage CFD for the development of high-performance, energy-efficient CCC.
This work presents a novel fully automated computational framework for optimizing profile extrusion dies, aiming to achieve balanced flow at the die flow channel outlet while minimizing total pressure drop. The framework integrates non-isothermal, non-Newtonian flow modeling in OpenFOAM with a geometry parameterization routine in FreeCAD and a Bayesian optimization algorithm from Scikit-Optimize. A custom solver was developed to account for temperature-dependent viscosity using the Bird–Carreau–Arrhenius model, incorporating viscous dissipation and a novel boundary condition to replicate the thermal regulation used in the experimental process. For optimization, the die flow channel outlet cross-section is discretized into elemental sections, enabling localized flow analysis and establishing a convergence criterion based on the total objective function value. A case study on a tire tread die demonstrates the framework’s ability to iteratively refine internal geometry by adjusting key design parameters, resulting in significant improvements in outlet velocity uniformity and reduced pressure drop. Within the searching space, the results showed an optimal objective function of 0.2001 for the best configuration, compared to 0.7333 for the worst configuration, representing an enhancement of 72.7%. The results validate the effectiveness of the proposed framework in navigating complex design spaces with minimal manual input, offering a robust and generalizable approach to extrusion die optimization. This methodology enhances process efficiency, reduces development time, and improves final product quality, particularly for complex and asymmetric die geometries commonly found in the automotive and tire manufacturing industries.