Muhammad Naveed

Dr. Muhammad Naveed

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 November 2024 in Atmosphere
Verified
Journal Article
Open access
PDF file
Syed Samran Ali ShahSyed Samran Ali Shah
Syed Samran Ali Shah
KTKanishka Sauis Turrakheil
Kanishka Sauis Turrakheil
MNMuhammad Naveed
Muhammad Naveed
The soil-based infrastructure is the backbone of the global economy, connecting people, enhancing quality of life, and promoting health and safety. However, its vulnerabilities are becoming apparent due to climate change, mainly through frequent wetting and drying (wd) cycles. Despite few studies in the past, research showing the stability of flood embankments in the long term, incorporating the impact of wetting and drying cycles on the hydromechanical characteristics of soil, is scarce. This study aimed to assess the impact of controlled wd cycles on the hydromechanical properties of clay and silty sand soils and its implications for the stability of a typical flood embankment. Volumetric changes were monitored during the wd cycles. The soil water characteristic curve (SWCC), saturated hydraulic conductivity (ksat), effective cohesion (c′), and effective angle of internal friction (ϕ′) were measured at 1 and 10 wd cycles. The results indicated that the 10 wd cycles decreased the saturated moisture content and resulted in a flatter SWCC compared to the 1 wd cycle for clayey soil. The ksat value was also significantly higher at 10 wd cycles than 1 wd cycle for clayey soil. An insignificant difference was found in both the SWCC and ksat at 1 and 10 wd cycles for silty sand soil. The ϕ′ value for the clayey soil decreased from 28.5 to 20.1 as the wd cycles increased from 1 to 10, while c′ remained unchanged at 10 kN/m2. On the other hand, for the silty sand soil, ϕ′ increased from 34.6 to 37.5 with an increase in wd cycles from 1 to 10, and c′ remained constant at 1 kN/m2. Numerical modelling of transient water flow coupled with a slope stability analysis revealed that the stability of a flood embankment depends on the evolution of soil hydromechanical properties due to wd cycles and the duration of flooding. These findings underscore the need for proactive measures to mitigate landslide risks in regions prone to frequent wd cycles, thereby ensuring the safety and resilience of slopes and associated infrastructure.

17 July 2024 in Atmosphere
Verified
Journal Article
Open access
PDF file
KTKanishka Sauis Turrakheil
Kanishka Sauis Turrakheil
Syed Samran Ali ShahSyed Samran Ali Shah
Syed Samran Ali Shah
MNMuhammad Naveed
Muhammad Naveed
This study investigates the evolution of soil pore structure and shear strength deterioration in compacted clayey soil under controlled wetting and drying (wd) cycles, which are expected to become more frequent due to climate change. Thirty soil samples were compacted at optimal moisture content and 90% maximum dry density. These samples were then subjected to 0, 1, 5, 10, and 15 controlled wd cycles from saturation to the wilting point, and volumetric changes were recorded during each cycle. After the wd treatment, the soil samples were scanned using X-ray computed tomography (CT) at 50 μm resolution and then sheared under unconsolidated–undrained and consolidated–undrained conditions in a triaxial test. Significant shrinkage and swelling of soil samples were observed during wd cycles, with average volumetric strain fluctuating between +12% at saturation and −5% at the wilting point. X-ray CT visualisation and analysis revealed higher porosity, more prominent pores, and increased pore length in soil samples with increasing wd cycles. Both undrained and effective soil shear strength markedly decreased with increasing wd cycles. CT-derived macroporosity and pore length were significant predictors of the soil’s undrained and effective shear strength when exposed to wd cycles. The findings emphasise the considerable impact of climate change, specifically wd cycles, on clayey soil, highlighting the need for consideration in the design of earth-based infrastructure.

3 September 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
Syed Samran Ali ShahSyed Samran Ali Shah
Syed Samran Ali Shah
KTKanishka Sauis Turrakheil
Kanishka Sauis Turrakheil
MNMuhammad Naveed
Muhammad Naveed
The earth infrastructure is the backbone of the global economy, connecting people, enhancing quality of life, and promoting health and safety. However, its vulnerabilities are becoming apparent due to climate change, mainly through frequent wetting and drying (wd) cycles. This study aimed to assess the impact of controlled w-d cycles on the hydromechanical properties of clayey and silty sand soils and its implications for the performance of a typical flood embankment. Volumetric changes were monitored during the w-d cycles. Soil water characteristic curve (SWCC), saturated hydraulic conductivity (ksat), effective cohesion (c’) and effective angle of internal friction (ϕ’) were measured at 1 and 10 w-d cycles. The results indicated that the 10 w-d cycles decreased the saturated moisture content and a flatter SWCC compared to the 1 w-d cycle for clayey soil. The ksat was also significantly higher at 10 w-d cycles than the 1 w-d cycle for clayey soil. An insignificant difference was found in both SWCC and ksat at 1 and 10 w-d cycles for silty sand soil. The ϕ’ for the clayey soil decreased from 28.5 to 20.1 as the wd cycles increased from 1 to 10, while the c’ remained unchanged at 10 kN/m2. On the other hand, for the silty sand soil, the ϕ’ increased from 34.6 to 37.5 with an increase in w-d cycles from 1 to 10, and the c’ remained constant at 1 kN/m2. Numerical modelling of transient water flow coupled with slope stability analysis revealed the dependence of flood embankment performance on the soil's hydromechanical properties and the flooding duration. These findings underscore the need for proactive measures to mitigate landslide risks in regions prone to frequent w-d cycles, thereby ensuring the safety and resilience of slopes and associated infrastructure.

11 June 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
KTKanishka Sauis Turrakheil
Kanishka Sauis Turrakheil
Syed Samran Ali ShahSyed Samran Ali Shah
Syed Samran Ali Shah
MNMuhammad Naveed
Muhammad Naveed
The study investigates the evolution of soil pore structure and shear strength deterioration in compacted clayey soil under controlled wetting and drying (wd) cycles, which are expected to become more frequent due to climate change. Thirty soil samples were compacted at optimal moisture content and 90% of maximum dry density. These samples were then subjected to 0, 1, 5, 10, and 15 controlled wd cycles from saturation to the wilting point, and volumetric changes were recorded during each cycle. After the wd treatment, the soil samples were scanned using X-ray Computed Tomography (CT) at 50 μm resolution and then sheared under unconsolidated-undrained and consolidated-undrained conditions in a triaxial test. Significant shrinkage and swelling of soil samples were observed during wd cycles, with average volumetric strain fluctuating between +12% at saturation and -5% at the wilting point. X-ray CT visualisation and analysis revealed higher porosity, more prominent pores and increased pore length in soil samples with increasing wd cycles. Both undrained and effective soil shear strength markedly decreased with increasing wd cycles. CT-derived macroporosity and pore length were significant predictors of the soil's undrained and effective shear strength when exposed to wd cycles. The findings emphasise the considerable impact of climate change, specifically wd cycles, on clayey soil, highlighting the need for consideration in the design of earth-based infrastructure.

19 June 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KTKanishka Sauis Turrakheil
Kanishka Sauis Turrakheil
Syed Samran Ali ShahSyed Samran Ali Shah
Syed Samran Ali Shah
MNMuhammad Naveed
Muhammad Naveed
Climate-induced wetting and drying (WD) cycles significantly affect the long-term performance of geotechnical structures. This study explores expansive Oxford clay’s mechanical and volumetric responses stabilised with ordinary Portland cement (OPC) and guar gum (GG) under repeated WD cycles. We prepared 108 samples in total—36 untreated, 36 treated with OPC, and 36 treated with GG. These samples were compacted to 90% of their maximum dry density and subjected to 1, 5, 10, and 15 WD cycles, with nine samples for each treatment at each cycle. During the WD cycles, we monitored volumetric strain and moisture content. Mechanical performance was assessed through unconsolidated undrained triaxial tests conducted at matric suctions of −1500 kPa, −33 kPa, and under saturated conditions. We evaluated the undrained shear strength (Su), secant modulus of elasticity (E50), and modulus of toughness (Ut). The results showed that OPC-treated samples consistently exhibited the highest Su at −1500 kPa across all WD cycles, followed by untreated and GG-treated samples. At −33 kPa, OPC-treated samples again outperformed the others in Su, while GG-treated samples performed better than the untreated ones. Under saturated conditions, GG-treated samples displayed a similar Su to OPC-treated samples, significantly higher than untreated samples. Energy absorption capacity, measured through Ut, peaked for OPC-treated samples at −1500 kPa but favoured GG treatment at −33 kPa and under saturation. X-ray computed tomography (CT) revealed severe degradation in untreated samples, characterised by extensive cracking, minor cracking in OPC-treated samples, and minimal damage in GG-treated samples. This highlights the superior resilience of guar gum to wetting–drying cycles. These findings underscore the potential of guar gum as a sustainable alternative to cement for enhancing the WD resilience of expansive soils, particularly under low-suction or saturated conditions.

23 March 2020
Verified
Conference Paper
Open access
MNMuhammad Naveed
Muhammad Naveed
KTKanishka S. Turrakheil
Kanishka S. Turrakheil
Fabio TostiFabio Tosti
Fabio Tosti
AAAmir M. Alani
Amir M. Alani
Potholes are one of the public’s main local concerns as they cost a lot to the economy in terms of repair bills, delays while repairs are carried out and vehicle wear-and-tear. According to the Annual Local Authority Road Maintenance (ALARM) survey, eliminating the pothole backlog in England and Wales would cost £9.8bn and take a decade to complete despite increased local roads investment. The aim of this study is to research why potholes occur in the first place using non-destructive testing (NDT) and potential remedies in terms of the development of effective design and innovative materials to prevent their formation in future.To investigate the causes of potholes formation, in-situ use of NDT methods such as ground-penetrating radar (GPR) has proven effectiveness as roads remain in continuous use. Analysis of GPR data can provide information on layer depths, material condition, moisture, voiding, reinforcement and location of other features [1, 2, 3].Through our results, we will test two hypothesis; (i) shallow potholes are formed on loss of adhesion of the surface course, (ii) deep potholes are formed due to the loss of bearing capacity or settlement of the subgrade. Poor drainage in combination of heavy loads trigger shallow potholes while extreme wetting-drying cycles as a result of climate change decayed subgrade conditions of the pavement.Results presented in this abstract are part of a PhD project funded by the University of West London. References[1] Saarenketo, T. and T. Scullion (2000). Road evaluation with ground penetrating radar. Journal of Applied Geophysics (43): 119–138.[2] Benedetto, A., Tosti, F., Bianchini Ciampoli, L., and F. D’Amico (2016). An overview of ground-penetrating radar signal processing techniques for road inspections. Signal Processing (132): 201-209.[3] Benedetto, A., Benedetto, F., and F. Tosti (2012). GPR applications for geotechnical stability of transportation infrastructures. Nondestructive Testing and Evaluation, 27 (3): 253–262.