The influence of coal fly ash and glass fiber waste on the tensile strength of cement concrete was studied using central composite design. Coal fly ash was used to replace 10% of the cement in the concrete mix. Glass fiber was added to improve the tensile properties of the concrete in different dosages and lengths. In total, 14 mixes were investigated, one only with 10% coal fly ash replacement of cement and the other thirteen were determined by the experimental design. Using analysis of variance, the order of importance of the variables was established for each property (flexural strength and split tensile strength). From the nonlinear response surfaces, it was found that higher values of flexural strength were obtained for fibers longer than 12 mm and at a dosage of 1-2%. For split tensile strength, higher values were obtained for fibers with a length of 19–28 mm and at a dosage of 1–1.5%.

The aim of this paper is to optimize the lifetime of dies for the multiple response in metal extrusion process. The main objective of the multiple response optimization is to improve the quality of a product or process by minimizing the effects of variation without eliminating the causes. Numerical simulations with ABAQUS software obtain the results of the tests.

The meaning of technological progress is to produce economic development and to increase the level of personal comfort. Sustainability can only be achieved if, at the microsystem level as well as at the macrosystem level, the secondary effects of the activities undertaken by people on the environment are in a state of neutrality compared to the impact they can produce on natural conditions. This neutrality can be intrinsic or can be achieved through coercive and compensatory measures. If we take into account the production of carbon dioxide that accompanies a product from the stages of conceptualisation, design, procurement of materials, execution, operation, maintenance, decommissioning and recycling the waste produced at the end of use, then nothing can be sustainable in pure form. Nevertheless, there are products whose production, both as a raw material and as a technological process, can be neutral in terms of carbon emissions. Moreover, they can even become carbon negative over time. This is also the case with eco-sustainable hemp concrete, whose capacity to absorb carbon dioxide starts from the growth phase of the plant from which the raw material is obtained and continues throughout the existence of the constructed buildings. Not only does it absorb carbon dioxide, but it also stores it for a period of at least 50 years as long as the construction is guaranteed, being at the same time completely recyclable. However, in order to obtain an optimal mixture from the point of view of raw material consumption, represented by industrial hemp wood chips and the binder based on lime and cement, multiple experiments are necessary. The study presented in this work is based on the use of an advanced method of experimental planning (design of experiments method), which makes possible the correlation between the values obtained experimentally and the algorithm that generated the matrix arrangement of the quantities of materials used in the recipes. This approach helps to create the necessary framework for parametric optimisation with a small number of trials. Thus, it is possible to obtain the mathematical law valid within the minimum and maximum limits of the studied domain that defines the characteristics of the material and allows the achievement of optimisation. The material is thus designed to satisfy the maximum thermal insulation requirements that it can achieve depending on a certain minimum admissible compressive strength.