Saheli Biswas

Dr. Saheli Biswas

Energy BU, Commonwealth Scientific and Industrial Research Organisation, Canberra, Australian Capital Territory, Australia
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2021 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
SRShambhu Singh Rathore
Shambhu Singh Rathore
Saheli BiswasSaheli Biswas
Saheli Biswas
DFDaniel Fini
Daniel Fini
AKAniruddha Kulkarni
Aniruddha Kulkarni
SGSarbjit Giddey
Sarbjit Giddey

8 September 2020 in Frontiers in Energy Research
Verified
Journal Article
Open access
PDF file
Saheli BiswasSaheli Biswas
Saheli Biswas
AKAniruddha Kulkarni
Aniruddha Kulkarni
SGSarbjit Giddey
Sarbjit Giddey
SBSankar Bhattacharya
Sankar Bhattacharya
Environmental issues related to global warming are constantly pushing the fossil fuel-based energy sector toward an efficient and economically viable utilization of renewable energy. However, challenges related to renewable energy call for alternative routes of its conversion to fuels and chemicals by an emerging Power-to-X approach. Methane is one such high-valued fuel that can be produced through renewables-powered electrolytic routes. Such routes employ alkaline electrolyzers, proton exchange membrane electrolyzers, and solid oxide electrolyzers, commonly known as solid oxide electrolysis cells (SOECs). SOECs have the potential to utilize the waste heat generated from exothermic methanation reactions to reduce the expensive electrical energy input required for electrolysis. A further advantage of an SOEC lies in its capacity to co-electrolyze both steam and carbon dioxide as opposed to only water, and this inherent capability of an SOEC can be harnessed for in situ synthesis of methane within a single reactor. However, the concept of in situ methanation in SOECs is still at a nascent stage and requires significant advancements in SOEC materials, particularly in developing a cathode electrocatalyst that demonstrates activity toward both steam electrolysis and methanation reactions. Equally important is the appropriate reactor design along with optimization of cell operating conditions (temperature, pressure, and applied potential). This review elucidates those developments along with research and development opportunities in this space. Also presented here is an efficiency comparison of different routes of synthetic methane production using SOECs in various modes, that is, as a source of hydrogen, syngas, and hydrogen/carbon dioxide mixture, and for in situ methane synthesis.

18 October 2024 in Processes
Verified
Journal Article
Open access
PDF file
SLShivesh Loganathan
Shivesh Loganathan
Saheli BiswasSaheli Biswas
Saheli Biswas
GKGurpreet Kaur
Gurpreet Kaur
Sarbjit GiddeySarbjit Giddey
Sarbjit Giddey
Ceramic proton conductors have the potential to lower the operating temperature of solid oxide cells (SOCs) to the intermediate temperature range of 400–600 °C. This is attributed to their superior ionic conductivity compared to oxide ion conductors under these conditions. However, prominent proton-conducting materials, such as yttrium-doped barium cerates and zirconates with specified compositions like BaCe1−xYxO3−δ (BCY), BaZr1−xYxO3−δ (BZY), and Ba(Ce,Zr)1−yYyO3−δ (BCZY), face significant challenges in achieving dense electrolyte membranes. It is suggested that the incorporation of transition and alkali metal oxides as sintering additives can induce liquid phase sintering (LPS), offering an efficient method to facilitate the densification of these proton-conducting ceramics. However, current research underscores that incorporating these sintering additives may lead to adverse secondary effects on the ionic transport properties of these materials since the concentration and mobility of protonic defects in a perovskite are highly sensitive to symmetry change. Such a drop in ionic conductivity, specifically proton transference, can adversely affect the overall performance of cells. The extent of variation in the proton conductivity of the perovskite BCZY depends on the type and concentration of the sintering aid, the nature of the sintering aid precursors used, the incorporation technique, and the sintering profile. This review provides a synopsis of various potential sintering techniques, explores the influence of diverse sintering additives, and evaluates their effects on the densification, ionic transport, and electrochemical properties of BCZY. We also report the performance of most of these combinations in an actual test environment (fuel cell or electrolysis mode) and comparison with BCZY.

1 September 2021 in Electrochimica Acta
Verified
Journal Article
Open access
Saheli BiswasSaheli Biswas
Saheli Biswas
AKAniruddha Kulkarni
Aniruddha Kulkarni
DFDaniel Fini
Daniel Fini
SRShambhu Singh Rathore
Shambhu Singh Rathore
ASAaron Seeber
Aaron Seeber
SBSankar Bhattacharya
Sankar Bhattacharya

5 September 2023 in Electrochimica Acta
Verified
Journal Article
Closed access
Saheli BiswasSaheli Biswas
Saheli Biswas
GKGurpreet Kaur
Gurpreet Kaur
SGSarbjit Giddey
Sarbjit Giddey

19 June 2025 in Ceramics
Verified
Journal Article
Open access
PDF file
Saheli BiswasSaheli Biswas
Saheli Biswas
SVSareh Vafakhah
Sareh Vafakhah
GKGurpreet Kaur
Gurpreet Kaur
ASAaron Seeber
Aaron Seeber
Sarbjit GiddeySarbjit Giddey
Sarbjit Giddey
Proton-conducting ceramics have gained significant attention in various applications. Yttrium-doped barium cerium zirconate (BaCexZr1−x−yYyO3–δ) is the state-of-the-art proton-conducting electrolyte but poses a major challenge because of its high sintering temperature. Sintering aids have been found to substantially reduce the sintering temperature of BaCexZr1−x−yYyO3–δ. This work evaluates, for the first time, the impact of NiO and ZnO addition in three different loadings (1, 3, 5 mol%), via wet mechanical mixing, on the sintering and electrical properties of a low cerium-containing composition, BaCe0.2Zr0.7Y0.1O3–δ (BCZY). The sintering temperature remarkably dropped from 1600 °C (for pure BCZY) to 1350 °C (for NiOBCZY and ZnOBCZY) while achieving > 95% densification. In general, ZnO gave higher densification than NiO, the highest being 99% for 5 mol% ZnOBCZY. Dilatometric studies revealed that ZnOBCZY attained complete shrinkage at temperatures lower than NiOBCZY. Up to 650 °C, ZnO showed higher conductivity compared to NiO for the same loading, mostly due to a higher extent of Zn incorporation inside the BCZY lattice as seen from the BCZY peak shift to a lower Bragg’s angle in X-ray diffractograms, and the bigger grain sizes of ZnO samples compared to NiO captured in scanning electron microscopy. At any temperature, the variation in conductivity as a function of sintering aid concentration followed the orders 1 mol% > 3 mol% > 5 mol% (for ZnO) and 1 mol% < 3 mol%~5 mol% (for NiO). This difference in conductivity trends has been attributed to the fact that Zn fully dissolves into the BCZY matrix, unlike NiO which mostly accumulates at the grain boundaries. At 600 °C, 1 mol% ZnOBCZY showed the highest conductivity of 5.02 mS/cm, which is, by far, higher than what has been reported in the literature for a Ce/Zr molar ratio <1. This makes ZnO a better sintering aid than NiO (in the range of 1 to 5 mol% addition) in terms of higher densification at a sintering temperature as low as 1350 °C, and higher conductivity.