Marjorie CAVARROC-WEIMER

Dr. Marjorie CAVARROC-WEIMER

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2023 in Coatings
Verified
Journal Article
Open access
PDF file
GCGuillaume Carnide
Guillaume Carnide
LCLaura Cacot
Laura Cacot
YCYohan Champouret
Yohan Champouret
VPVincent Pozsgay
Vincent Pozsgay
TVThomas Verdier
Thomas Verdier
RCRichard Clergereaux
Richard Clergereaux
The requirements of nanocomposite thin films, having non-aggregated nanoparticles homogeneously dispersed in the matrix, have been realized using a new method of Direct Liquid Reactor-Injector (DLRI) of nanoparticles. In this approach, unlike conventional aerosol-assisted plasma deposition, the nanoparticles are synthesized before their injection as an aerosol into plasma. In our experiments, we have used two different plasma reactors, namely an asymmetric low-pressure RF plasma reactor and a parallel plate dielectric barrier discharge at atmospheric pressure. Our results have shown that DLRI can be easily coupled with various plasma processes as this approach allows the deposition of high-quality multifunctional nanocomposite thin films, with embedded nanoparticles of less than 10 nm in diameter. Hence, DLRI coupled with plasma processes meets the specifications for the deposition of multifunctional coatings.

14 October 2024 in Energies
Verified
Journal Article
Open access
PDF file
AAAurélie Achille
Aurélie Achille
Fabrice MauvyFabrice Mauvy
Fabrice Mauvy
SFSebastien Fourcade
Sebastien Fourcade
DMDominique MICHAU
Dominique MICHAU
MCMarjorie CAVARROC-WEIMER
Marjorie CAVARROC-WEIMER
APAngeline POULON
Angeline POULON
Proton Exchange Membrane Fuel Cells (PEMFCs) are promising technology to convert chemical energy from dihydrogen in electrical energy. HT-PEMFCs are working at high temperatures (above 120 °C) and with doped orthophosphoric acid H3PO4 PBI membranes. In such devices, bipolar metallic plates are used to provide reactive gas inside the fuel cell and collect the electrical current. The metallic elements used as bipolar plates, end plates, and interconnectors in acid electrolyte and gaseous fuel cells are severely damaged by a combination of oxidation (due in particular to the use of oxygen, whether pure or contained in the air) and corrosion (due in particular to acid effluents from the electrolyte). This degradation rapidly leads to the loss of the electrical conductivity of the metallic elements and today requires the use of very specific alloys, possibly coated with pure gold. The solution investigated in the present study is the use of a protective coating based on single-phase nitrides obtained by reactive magnetron sputtering or reactive HiPIMS (High-Power Impulse Magnetron Sputtering). The influence of the microstructure on the physical–chemical properties was studied. The electrochemical properties were quantified following two approaches. First, the corrosion current of the developed coatings was measured at room temperature and at higher temperatures using the Linear Sweep Voltammetry (LSV) technique. Then, Electrochemical Impedance Spectroscopy (EIS) measurements were performed to better identify and evaluate their corrosion-resistance performances.

8 April 2025 in Journal of Applied Physics
Verified
Journal Article
Open access
DBDimitri Boivin
Dimitri Boivin
AJAndrea Jagodar
Andrea Jagodar
Pascal BraultPascal Brault
Pascal Brault
TVThomas Vaubois
Thomas Vaubois
EMEdern Menou
Edern Menou
ATAnne-Lise Thomann
Anne-Lise Thomann
In this work, we evaluated the ability of three numerical methods to predict the phase formation in Cu–Zn binary and Cu–Ti–Zn ternary alloy thin films deposited by DC-magnetron sputter deposition. Molecular dynamics (MD) simulations were carried out to simulate the growth of the alloy film and study the organization at the atomic level. A Machine Learning (ML) approach trained with a recently published bulk HEA (high-entropy alloy) database was used to determine the presence of an amorphous phase, solid solutions, or/and intermetallics. Finally, CALPHAD (CALculation of PHAse Diagrams) thermodynamic modeling allows one to simulate the phase diagrams. Crystalline phases formed in experimental films were investigated by grazing incidence x-ray diffraction (GIXRD). Comparison with CALPHAD results highlights that for pure Ti or binary Cu–Zn films, the thermodynamically stable phases are formed in the films. Less agreement was found at low or high percentage of Ti introduced in the Cu–Zn system, and drastic differences were observed for elemental compositions close to equimolarity. In those cases, the out of equilibrium nature of the magnetron sputtering deposition technique is evidenced. The very limited agreement between the GIXRD and ML approach is explained by the available database, which is exclusively based on bulk alloys. Elemental composition of the alloy does not itself determine the stabilized phases: elaboration techniques are to be taken into account too. MD simulations bring information on a possible segregation of the Zn element to the surface and grain boundaries. A very good agreement is evidenced between the calculated and experimental diffraction patterns.

20 May 2025 in Journal of Physics: Materials
Verified
Journal Article
Open access
SKShahid Khaleel
Shahid Khaleel
ZGZhaojing Gao
Zhaojing Gao
ACAnthony Camus
Anthony Camus
OROscar Joaquin Isasmendi Ramirez
Oscar Joaquin Isasmendi Ramirez
MCMarjorie CAVARROC-WEIMER
Marjorie CAVARROC-WEIMER
CSClara Santato
Clara Santato
Eumelanin, the brown-black member of the melanin family of biopigments, has emerged as a promising material for sustainable organic electronics. Sepia eumelanin develops hierarchically from (5, 6)-dihydroxyindole (DHI) and (5, 6)-dihydroxyindole-2-carboxylic acid (DHICA) monomers, and its structure is made up of granules with typical size in the 100–300 nm range. Literature reports that Sepia eumelanin (from now on indicated as Sepia melanin), derived from the ink sac of cuttlefish, exhibits predominant electronic transport in dry state and mixed ionic–electronic transport in its hydrated state when studied at millimetric or micrometric distance ranges. To explore the upper limit of the conductivity of Sepia melanin and unlock its full technological potential, we investigated its electrical response at the nanoscale where the influence of granule boundaries is expected to be minimal. Using electrodes patterned at the nanoscale by e-beam lithography, we run current–voltage, current–time and electrochemical impedance spectroscopy measurements; we observed predominant electronic transport mechanisms in Sepia melanin, with conductivities that increase as the interelectrode distance decreases. Temperature-resolved experiments permitted us to deduce the transport activation energy. Our work highlights the importance of exploring the electrical response of natural materials across varying distance scales to exploit their full potential for sustainable organic electronics.

6 May 2025 in The European Physical Journal Applied Physics
Verified
Journal Article
Open access
PDF file
Pascal BraultPascal Brault
Pascal Brault
MCMarjorie CAVARROC-WEIMER
Marjorie CAVARROC-WEIMER
SFSara Fazeli
Sara Fazeli
NFNicolas Froloff
Nicolas Froloff
For understanding and controlling film growth parameters of various sputtering deposition conditions, molecular dynamics simulations are carried out to describe Tantalum Nitride conventional Magnetron Sputtering and High Power Impulse Magnetron Sputtering (HiPIMS) film growth and structure. It includes full atomic and ion energy distribution for a realistic account of experimental conditions, notably for HiPIMS deposition technique. Results are well compared with available experimental results in the literature, demonstrating that the present method is well suited for a very broad set of experimental conditions. The effect of the sputtered ion to neutral ratio on the film crystallographic structure is addressed using simulated X-ray diffraction and polyhedral template matching methods. It is shown that hcp phase predominates at moderate ion flux, and always coexists with fcc phase. The present molecular dynamics simulations, are therefore a powerful tool for correlating the predicted thin film structure to experimental conditions.

17 March 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
NKNargiz Kazimova
Nargiz Kazimova
NRNuria Romero
Nuria Romero
JEJérôme Esvan
Jérôme Esvan
MCMarjorie CAVARROC-WEIMER
Marjorie CAVARROC-WEIMER
Sara CavaliereSara Cavaliere
Sara Cavaliere
Karine PhilippotKarine Philippot
Karine Philippot
Pt-based catalysts remain the most effective materials for the oxygen reduction reaction (ORR) at the cathode of proton exchange membrane fuel cells (PEMFCs); however, platinum scarcity and high cost severely limit the large-scale deployment of the technology. Improving catalytic activity and durability through precise control of nanoparticle morphology is therefore crucial for reducing costs and enhancing sustainability, enabling PEMFC widespread adoption. In this context, carbon-supported Pt-based nanoparticles with a 30 wt.% Pt loading were synthesized by an organometallic chemistry approach using hexadecylamine (HDA) as a stabilizer, allowing fine control over nanoparticle morphology. Two distinct synthesis pathways (one-pot and two-step procedures) were used to prepare platinum catalysts supported on KetjenBlack EC-300J (KB), and their influence on the electrocatalytic activity of the obtained nanomaterials was studied. Furthermore, the effect of HDA stabilization on catalyst performance was investigated. Directly synthesized Pt/KB catalysts exhibited similar ORR mass activity, regardless of whether or not HDA was present. Pt/KB prepared by the two-step procedure showed a significantly lower performance. Additionally, despite a larger loss of electrochemical surface area during an accelerated stress test compared to a commercial Pt/C reference, PtHDA/KB and Pt/KB catalysts maintained stable mass activity and limited specific activity degradation, highlighting the beneficial effect of nanoparticle stabilization in the presence of HDA on prolonged electrocatalyst cycling.