Ahmet Faruk Bakan

Prof. Ahmet Faruk Bakan

orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2016 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
TTTurker Turker
Turker Turker
UBUmit Buyukkeles
Umit Buyukkeles
Ahmet Faruk BakanAhmet Faruk Bakan
Ahmet Faruk Bakan
High-performance current control is required to obtain a smooth output torque in permanent-magnet synchronous motor (PMSM) drives. In this manner, a new discrete-time robust predictive current controller is presented for PMSM drives. Controller and current prediction schemes are designed based on the dead-beat structure. The dead-beat control has good transient response, but it suffers from parametric uncertainties and unmodeled dynamics. In order to provide robustness, a discrete-time integral term is added to the dead-beat current prediction. The stability analysis is carried out considering the prediction error dynamics, nonlinear uncertain model of PMSM, and the integral action as the states of the overall system. The designed robust predictive controller is tested through numerical simulations and experiments. The proposed controller is easy to implement and suitable for high-performance PMSM applications.

7 August 2002 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HBH. Bodur
H. Bodur
Ahmet Faruk BakanAhmet Faruk Bakan
Ahmet Faruk Bakan
In this paper, a new active snubber cell that overcomes most of the drawbacks of the normal "zero voltage transition-pulse width modulation" (ZVT-PWM) converter is proposed to contrive a new family of ZVT-PWM converters. A converter with the proposed snubber cell can also operate at light load conditions. All of the semiconductor devices in this converter are turned on and off under exact or near zero voltage switching (ZVS) and/or zero current switching (ZCS). No additional voltage and current stresses on the main switch and main diode occur. Also, the auxiliary switch and auxiliary diodes are subjected to voltage and current values at allowable levels. Moreover, the converter has a simple structure, low cost, and ease of control. A ZVT-PWM boost converter equipped with the proposed snubber cell is analyzed in detail. The predicted operation principles and theoretical analysis of the presented converter are verified with a prototype of a 2 kW and 50 kHz PWM boost converter with insulated gate bipolar transistor (IGBT). In this study, a design procedure of the proposed active snubber cell is also presented. Additionally, at full output power in the proposed soft switching converter, the main switch loss is about 27% and the total circuit loss is about 36% of that in its counterpart hard switching converter, and so the overall efficiency, which is about 91% in the hard switching case, increases to about 97%.

10 May 2004 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HBH. Bodur
H. Bodur
Ahmet Faruk BakanAhmet Faruk Bakan
Ahmet Faruk Bakan
In this paper, a new active snubber cell is proposed to contrive a new family of pulse width modulated (PWM) converters. This snubber cell provides zero voltage transition (ZVT) turn on and zero current transition (ZCT) turn off together for the main switch of a converter. Also, the snubber cell is implemented by using only one quasi resonant circuit without an important increase in the cost and complexity of the converter. New ZVT-ZCT-PWM converter equipped with the proposed snubber cell provides most the desirable features of both ZVT and ZCT converters presented previously, and overcomes most the drawbacks of these converters. Subsequently, the new converter can operate with soft switching successfully at very wide line and load ranges and at considerably high frequencies. Moreover, all semiconductor devices operate under soft switching, the main devices do not have any additional voltage and current stresses, and the stresses on the auxiliary devices are at low levels. Also, the new converter has a simple structure, low cost and ease of control. In this study, a detailed steady state analysis of the new converter is presented, and this theoretical analysis is verified exactly by a prototype of a 1-kW and 100-kHz boost converter.

17 February 2010 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
IAIsmail Aksoy
Ismail Aksoy
HBHaci Bodur
Haci Bodur
Ahmet Faruk BakanAhmet Faruk Bakan
Ahmet Faruk Bakan
In this study, a new snubber cell is developed in order to increase the power density and the efficiency in pulsewidth modulation (PWM) converters and to decrease the EMI noise. The developed snubber cell provides main switch both to turn on with zero-voltage transition (ZVT) and to turn off with zero-current transition (ZCT). The converter incorporating this snubber cell operates with soft switching (SS) in a wide range of line and load voltages. Also, all semiconductor devices in the converter operate with SS. There is no additional voltage stress in the main components, and the stresses of the auxiliary components are negligible. The new converter has a simple structure, low cost, and ease of control as well. The operation principle and detailed steady-state analysis of the ZVT-ZCT-PWM boost converter with new snubber cell are presented. The presented theoretical analysis is verified exactly by a prototype of 100 kHz and 500 W converter. Also, the overall efficiency of the new converter has reached a value of 98.3% at nominal output power.

30 April 2012 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Ahmet Faruk BakanAhmet Faruk Bakan
Ahmet Faruk Bakan
NANihan ALTINTAŞ
Nihan ALTINTAŞ
IAİsmail Aksoy
İsmail Aksoy
In the phase shifted full bridge (PSFB) pulse width modulation (PWM) converter, external snubber capacitors are connected in parallel to insulated gate bipolar transistors (IGBTs) in order to decrease turn-off losses. The zero voltage transition (ZVT) condition is not provided at light loads, thus the parallel capacitors discharge through IGBTs at turn on which causes switching losses and failure risk of the IGBTs. Capacitor discharge through IGBT restricts the use of high-value snubber capacitors, and turn-off loss of the IGBT increases at high currents. This problematic condition occurs especially at the lagging leg. In this study, a new technique enabling the use of high-value snubber capacitors with the lagging leg of the PSFB PWM converter is proposed. As advantages of the proposed technique, high-capacitive discharge current through IGBT is prevented at light loads, the turn-off switching losses of the IGBTs are decreased, and the performance of the converter is improved at high currents. The proposed PSFB PWM converter includes an auxiliary circuit, and it has a simple structure, low cost, and ease of control as well. The operation principle and detailed design procedure of the converter are presented. The theoretical analysis is verified exactly by a prototype of 75 kHz and 10 kW converter.

18 March 2013 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
NANihan ALTINTAŞ
Nihan ALTINTAŞ
Ahmet Faruk BakanAhmet Faruk Bakan
Ahmet Faruk Bakan
IAİsmail Aksoy
İsmail Aksoy
In this study, a new boost converter with an active snubber cell is proposed. The active snubber cell provides main switch to turn ON with zero-voltage transition (ZVT) and to turn OFF with zero-current transition (ZCT). The proposed converter incorporating this snubber cell can operate with soft switching at high frequencies. Also, in this converter all semiconductor devices operate with soft switching. There is no additional voltage stress across the main and auxiliary components. The converter has a simple structure, minimum number of components, and ease of control as well. The operation principle and detailed steady-state analysis of the novel ZVT-ZCT-PWM boost converter are given. The presented theoretical analysis is verified exactly by a prototype of 100 kHz and 1 kW converter. Also, the overall efficiency of the new converter has reached a value of 97.8% at nominal output power.