Bigirimana Gentil

Dr. Bigirimana Gentil

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2024 in Processes
Verified
Journal Article
Open access
PDF file
Ping Fa ChiangPing Fa Chiang
Ping Fa Chiang
TZTeng Ling Zhang
Teng Ling Zhang
NMNdungutse Jean Maurice
Ndungutse Jean Maurice
JMJOIE CLAIRE MUGABEKAZI
JOIE CLAIRE MUGABEKAZI
Bigirimana GentilBigirimana Gentil
Bigirimana Gentil
Abdulmoseen Segun GiwaAbdulmoseen Segun Giwa
Abdulmoseen Segun Giwa
The accumulation of organic dyes and heavy metals (HMs) in sewage sludge (SS) after wastewater treatment is a significant problem due to the non-degradable nature of these pollutants. Moreover, the simultaneous removal of HMs and dyes in the complex process of SS treatment, such as anaerobic digestion (AD), has become attractive. HMs and dyes present in SS can have a detrimental effect on anaerobic digesters. These pollutants not only inhibit the production of methane, which is crucial for biogas generation, but also affect the stability of AD treatment, which can result in failure or inadequate performance of the AD process. This review highlights a novel method of removing HMs and dyes from the AD process of SS through the use of biochar modified with polyvinyl alcohol (PVA) and chitosan (CTS). The applications of conventional biochar have been limited due to poor adsorption capacity. However, modification using PVA/CTS composites enhances properties such as surface functional groups, adsorption capacity, porosity, surface area selectivity, and stability. Furthermore, this modified version can function as an additive in AD of SS treatment to boost biogas production, which is a viable source for heat generation or electricity supply. In addition, the digestates can be further processed through plasma pyrolysis for the removal of HMs and dyes bound to the modified biochar. Plasma pyrolysis generates two major products: syngas and slag. The syngas produced can then be used as a source of hydrogen, heat, and electricity, while the slag can potentially be reused as an AD additive or as a biofertilizer in the agricultural sector. Additionally, this study addresses the challenges associated with this integration and biochar modifications, and offers an outlook on understanding the interactions between the modified biochar properties, microbial dynamics, and the presence of micropollutants to ensure the economic viability and scalability of this technology. This comprehensive review provides insights into the potential of PVA/CTS-modified biochar as an effective additive in AD systems, offering a sustainable approach to SS treatment and valuable resource recovery.

23 December 2024 in PLOS ONE
Verified
Journal Article
Open access
PDF file
XLXinxin Liu
Xinxin Liu
NMNdungutse Jean Maurice
Ndungutse Jean Maurice
MCMugabekazi Joie Claire
Mugabekazi Joie Claire
Bigirimana GentilBigirimana Gentil
Bigirimana Gentil
JLJunning Li
Junning Li
Abdulmoseen Segun GiwaAbdulmoseen Segun Giwa
Abdulmoseen Segun Giwa
Pressure Swing Distillation (PSD) is the only advanced technology that does not require the addition of third components to the system to enhance the separation of azeotropic mixtures. It outperforms homogeneous distillation for separating pressure-sensitive azeotropic mixtures. In this study, we aimed to separate methanol and toluene using the Non-Random Two-Liquid (NRTL) and Aspen Plus thermodynamic calculation models to simulate a binary homogeneous azeotropic system. The standard PSD process was employed to separate methanol and toluene. Furthermore, multiple optimization sequences were utilized to sequentially optimize the process for obtaining higher purities of methanol and toluene while reducing the Total Annual Cost (TAC) and heat energy consumption. The effects of the optimization sequence on the TAC were investigated. The best optimization sequences for graphing in Origin or Aspen Plus were found to be RR1, NR, NF1, NF2, NT1, and NT2. Additionally, the Double-Effect Distillation (DED) optimization sequence is similar, with TAC as the primary function in the simulation and methanol and toluene purities up to 99.99%. In the DED simulation, the feed position and tray number were found to be sensitive to TAC by the order NR > NF1 > NF2 and NT1 > NT2. This study simulated PSD using the NRTL thermodynamic calculation model in Aspen Plus and generated visualizations using Origin software.

13 February 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Gladdys Mukamba MwikilwaGladdys Mukamba Mwikilwa
Gladdys Mukamba Mwikilwa
Bigirimana GentilBigirimana Gentil
Bigirimana Gentil
PCPing Cao
Ping Cao
The growing need for effective and sustainable solutions in humanitarian construction has prompted scholars and practitioners to explore technical approaches that address the challenges of natural disasters, health emergencies, armed conflicts and migratory flows. These solutions often encompass temporary shelters, durable shelters and multifunctional buildings designed to balance rapid deployment, cultural sensitivity and environmental sustainability. However, the assessment of sustainability in humanitarian construction remains insufficiently defined due to the complexities of crises, the variability of local materials and the impact of local climatic conditions. This study aims to bridge this gap by integrating Building Information Modeling (BIM) and simulation tools such as COMSOL Multiphysics 6.0 to study sustainable strategies for humanitarian housing. Using case studies aligned with IFRC, UNHCR and CRL (Red Cross of Luxembourg) family shelter standards, the research assessed a Climate and Local Skill-Centered Design (CLCD) by examining the performance of key design elements, including wall material emissivity and reflectance, natural lighting, and energy efficiency within the context of indoor thermal comfort. Simulation results revealed that wall finishing material reflectance significantly influences average daylight factors (D), with variations of 2% to 5% linked to lower reflectance values and changes in the window-to-floor ratio (WFR). Conversely, thermal comfort metrics indicated minimal variations in heat discomfort hours, maintaining indoor temperatures between 19 °C and 25 °C, consistent with ASHRAE Standard 55 thermal comfort criteria. This paper underscores the importance of integrating advanced IT tools and green local techniques and materials to optimize humanitarian housing for health, comfort and environmental performance, offering actionable insights for future humanitarian sustainable designs.

8 January 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Gladdys Mukamba MwikilwaGladdys Mukamba Mwikilwa
Gladdys Mukamba Mwikilwa
PCPing Cao
Ping Cao
Bigirimana GentilBigirimana Gentil
Bigirimana Gentil
The growing need for effective and sustainable solutions in humanitarian construction has prompted scholars and practitioners to explore technical approaches that address the challenges of natural disasters, health emergencies, armed conflicts and migratory flows. These solutions often encompass temporary shelters, durable shelters and multifunctional buildings designed to balance rapid deployment, cultural sensitivity and environmental sustainability. However, the assessment of sustainability in humanitarian construction remains insufficiently defined due to the complexities of crises, the variability of local materials and the impact of local climatic conditions. This study aims to bridge this gap by integrating Building Information Modeling (BIM) and simulation tools such as COMSOL Multiphysics to study sustainable strategies for humanitarian housing. Using case studies aligned with IFRC, UNHCR and CRL (red-cross of Luxembourg) family shelter standards, the research assessed a Climate and Local Skill-Centered Design (CLCD) by examining the performance of key design elements, including wall material emissivity and reflectance, natural lighting and energy efficiency within the indoor thermal comfort. Simulation results revealed that wall finishing material reflectance significantly influences average daylight factors (D), with variations of 2% to 5% linked to lower reflectance values and changes in the window-to-floor ratio (WFR). Conversely, thermal comfort metrics indicated minimal variations in heat discomfort hours, maintaining indoor temperatures between 19°C and 25°C, consistent with ASHRAE Standard 55 thermal comfort criteria. This paper underscores the importance of integrating advanced IT tools and green Local technic and materials to optimize humanitarian housing for health, comfort and environmental performance, offering actionable insights for future Humanitarian sustainable designs.
1

3 December 2024 in Journal of Recent Activities in Infrastructure Science
Verified
Journal Article
Closed access
PDF file
PCP. Cao
P. Cao
HKHasnat Mohammad Karibul
Hasnat Mohammad Karibul
Bigirimana GentilBigirimana Gentil
Bigirimana Gentil
Sustainable practice is necessary for the construction industry's environmental impact, particularly carbon footprint. A "cradle-to-gate" Life Cycle Assessment of the embodied carbon emissions of two structural systems, steel and reinforced concrete, is presented for an industrial building in Bangladesh. By quantifying these emissions through BIM modeling and emission factor databases, the analysis shows that steel-framed structures have a significantly higher carbon footprint than their concrete alternatives, mainly because of the energy-intensive steel production processes. Emissions from raw material extraction, transportation, and manufacturing stages are detailed and assessed. The results show that steel structures produce 60% more embodied carbon than reinforced concrete counterparts, primarily due to raw material emissions, with other emissions from aluminum and rebar in both systems. These findings provide a basis for construction material selection and highlight the need for low-carbon approaches to reduce the sector's carbon footprint in rapidly urbanizing areas like Bangladesh. Further research should extend to the end-of-life impacts and more localized emission data to continue to refine sustainable construction strategies.

2 March 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
Bigirimana GentilBigirimana Gentil
Bigirimana Gentil
PCPing Cao
Ping Cao
GMGladdys Mwikilwa
Gladdys Mwikilwa
WHWeihang Hua
Weihang Hua
NGNiyonzima Gadus
Niyonzima Gadus
GLGashurwe Alpha Libertas
Gashurwe Alpha Libertas
Payment delays, compliance bottlenecks, and contract disputes persist in public-private partnership (PPP) and build-operate-transfer (BOT) infrastructure projects. This study presents a blockchain-Internet of Things (IoT) framework integrating computer vision (ResNet-50, U-Net) for automated milestone verification and smart contract-based disbursement. Deployed on Hyperledger Fabric with BIM-trained models (93.6% field accuracy), the system was validated across an 18-month hydropower and highway case study. Results demonstrated substantial improvements: payment processing time reduced from 72.4 to 11 days (84.8%; p < 0.001, d = 1.05), dispute frequency decreased from 18.4 to 4.2 annually (77.2%; p < 0.001, d = 0.72), compliance verification accelerated by 87.9%, and BOT asset transfer documentation shortened from 8.3 to 0.5 months (94.0%). These findings empirically validate blockchain-IoT integration for transparent, automated infrastructure finance.