Geothermal resources are a sustainable and valuable source of energy that offers considerable economic and social advantages. The present investigation centers on the accessibility of geothermal reservoirs in Reshi Town, Taoyuan County, Changde City, located in the Hunan Province of China. Geophysical exploration techniques are of paramount importance in the identification and exploration of geothermal resources. The present investigation utilized an integrated geophysical approach that incorporates induced polarization (IP), magnetotelluric (MT), and joint profile techniques. The primary objective of this study was to examine the distribution of formation lithology, subsurface electrical structures, karst fracture development zones, and the location and occurrence of deep and large thermal reservoirs in Reshi Town, Changde City. The research encompassed a comprehensive process that included the collection of data, its subsequent interpretation, inversion, and validation through drilling. The joint profile approach provided comprehensive data on fault structures within the study region. Using magnetotelluric sounding, areas with lower electrical resistance were found along lines L2, L3, and L4. This showed that thermal water reservoirs were underground. The induced polarization sounding method exhibited a distinct response to geothermal water, including minerals, suggesting the presence of a high-temperature geothermal reservoir, along line 1. Drilling operations carried out at two different locations, ZK01 on line L3 and ZK02 on line L4, confirmed the existence of underground hot water. The drilling findings have verified the existence of faults F3 and F4, which act as important channels for geothermal fluids. The present research offers a dependable geophysical foundation for the forthcoming development of geothermal resources in Reshi Town, and areas with similar geological conditions.

The Qiushuwan Cu-Mo deposit, located in the East Qinling molybdenum belt, which is a major mining site recognized for its enormous reserves of medium-sized molybdenum. In order to enhance our comprehension and ascertain supplementary mineral resources, it is critical to conduct an in-depth investigation of both the deep and peripheral regions. The primary goal of this study is to investigate the Qiushuwan Copper Molybdenum Mine, which is located in Zhenping County, Henan Province. The spread spectrum-induced polarization (SSIP) method is utilized as a means of conducting mining exploratory analysis. Significant findings have been obtained through the collection of SSIP data, geological analysis, and electrical parameter study of rock and ore samples along profile-80. By conducting a meticulous examination of the SSIP data at suitable frequencies, two prominent conductive ore bodies, specifically C2 and C4, have been successfully discovered. C2 exhibits a correlation with granite porphyry and molybdenum veins, while C4 is linked to a skarn deposit that contains a concentration of copper ore. The spatial differences in conductivity within the research area have been precisely characterized using resistivity models obtained from the SSIP data. The precision and dependability of our conclusions have been confirmed through the integration of borehole data and the matching of geological sections with inversion models. The recovered core samples show a diverse range of minerals, containing both valuable ores and minerals that have undergone alteration. Pyrite constantly appears with molybdenite in the majority of samples. The aforementioned results provide a strong foundation for future exploration initiatives and sustainable resource exploitation, enabling informed decision-making in the effective use and administration of natural resources. This study adds to the existing body of knowledge on the Qiushuwan Cu-Mo deposit and improves exploration methods in the region by utilizing the SSIP approach. The findings are a useful asset for geologists, mining experts, and stakeholders, offering essential knowledge for future exploration and sustainable utilization of resources.

The Qiushuwan Cu-Mo deposit, situated in the East Qinling molybdenum belt, is a notable mining site renowned for its considerable quantities of medium-sized molybdenum. The goal of this study is to improve comprehension and identify additional mineral resources by conducting a thorough examination of the mine using the spread spectrum-induced polarization (SSIP) technique. Gathering SSIP data, conducting geological investigations, and examining the electrical characteristics of rock and mineral samples along Profile-80 led to significant discoveries. The investigation identified two significant ore bodies with high conductivity: C2, linked to granite porphyry and molybdenum veins, and C4, associated with a skarn deposit containing a concentrated amount of copper ore. This study used resistivity models created from SSIP data to find out how conductivity changed in different parts of the research area. Additional drill verifications validated these findings, indicating the presence of potential mineral resources. The petrographic analysis of core samples showed that minerals like pyrite, molybdenite, chalcopyrite, epidote, calcite, and garnet were present. Notably, the samples frequently contained both pyrite and molybdenite together. Sample 04-2 contained substantial quantities of molybdenite and pyrite; Sample 05-1 had occasional pyrite; and Sample 07-4 included both pyrite and chalcopyrite. These findings offer useful insights for evaluating the magnitude and economic feasibility of the mineral deposits; however, additional investigation is required to completely comprehend the scope of the resources. The integration of borehole data and the alignment of geological sections with inversion models confirmed the validity of the conclusions. The core samples that were retrieved show a lot of different minerals, including valuable ores and minerals that have been changed. Pyrite and molybdenite are always found together. These findings establish a solid basis for further investigation and the sustainable management of resources. This study contributes to the understanding of the Qiushuwan Cu-Mo deposit and advances exploration techniques using the spread spectrum-induced polarization (SSIP) method. It provides useful information for geologists, mining professionals, and stakeholders involved in resource usage.

The growing expansion of the economy and population has resulted in an increased inclination towards the utilization of groundwater resources. Conducting a geophysical survey is a widely employed method for subsurface mapping and the detection of groundwater. A geophysical study was conducted in Nanshan township, Huarong County, located in the Hunan province of the South-Central region of China. The investigation involved the utilization of a 2D electrical resistivity imaging technique employing forward and inverse pole–dipole electrode arrays. A total of six survey lines were established, each with an electrode distance from the nearest measuring point exceeding 800 m. The maximum current electrode separation was utilized in this setup. The spacing between the electrical resistivity sounding points was established at regular intervals. The findings from the exploration indicate the existence of multiple faults within the surveyed region. The study additionally identified two regions of structural failure, which occurred due to the convergence of faults oriented in different directions. This convergence led to the fracturing of rocks, an increase in water content, and a decrease in resistivity. The findings from the exploration were utilized in the formulation of five verification target boreholes. The results of this study offer significant insights that can inform future investigations into groundwater exploration endeavors within the region.

Models of subsurface structures are important for successful deposit exploration, but are challenged by the need to integrate data from different geophysical methods. In the present study, we evaluated a method of joint inversion in which audio-magneto telluric (AMT) and dual frequency induced polarization (DFIP) data sets are inverted simultaneously to produce a consistent 2D resistivity model to show a clear image of subsurface structures. To achieve the objectives, we conducted AMT and DFIP surveys along the same survey line within the Dongjun lead–zinc deposit in inner Mongolia by measuring 31 AMT survey sites with a station spacing of 40 m on a 1440 m survey track and operated in fifty-three frequencies in the range of 1–10,400 Hz to record the resistivity distribution of subsurface to depths exceeding 800 m. The same survey setup up was applied to the DFIP method using a pole–dipole array configuration and operating frequencies of 4 Hz and 4/13 Hz. The two-dimensional (2D) model obtained from AMT data revealed distinct low-resistivity anomalies in the middle of the 2D inversion model. In contrast, the DFIP inversion model showed a high resistive body in the same region with relatively high percent frequency effect (PFE) indicating high chargeability. In response to the discrepancies observed in the separate 2D inversion models, we implemented a joint inversion for both the AMT and DFIP data sets. The joint inversion resistivity model shows surficial conducting bodies and a high conductive body along the profile with relatively high PFE, indicating high chargeability. The final joint inversion resistivity model clearly images the large silica alteration zone and the Pb-Zn mineralization. This study demonstrates the feasibility of a joint inversion methodology and highlights the value of integrating geophysical methods through joint inversion for enhanced characterization and exploration of lead–zinc ores.