Khaled Ayman Eltoukhy

Mr. Khaled Ayman Eltoukhy

Materials Engineering, Purdue University West Lafayette, West Lafayette, Indiana, USA
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
KEKhaled Ayman Eltoukhy
Khaled Ayman Eltoukhy
MMMohamed Fawzy Aly Mohamed
Mohamed Fawzy Aly Mohamed
MSMarc Sarquella
Marc Sarquella
CLConcepción Langreo
Concepción Langreo
Mohamed SerryMohamed Serry
Mohamed Serry
This paper aims to fabricate a hybrid piezoelectric/triboelectric nanogenerator via fusion deposition modeling as a proof of concept in the wearable device industry. The nanogenerator structure consists of a TPU/ZnO nanocomposite and an Ecoflex layer. The nanocomposite layer is fabricated using two different weight percentages (15 wt% and 20 wt%) and poled piezoelectric sheets, generating 2.63 V to 3.46 V. Variations regarding the nanogenerator’s physical parameters were implemented to examine the effect on nanogenerator performance under different frequencies. The hybrid nanogenerator enabled energy harvesting for wearable devices. It was strapped on the side of the wrist to generate a potential difference with the motion of the wrist, creating a contact separation piezoelectric/triboelectric nanogenerator. Furthermore, a piezoelectric sheet was placed at the bottom of the wrist to harvest energy. The hybrid nanogenerator provided a maximum triboelectric response of 5.75 V and a maximum piezoelectric response of 2.85 V during wrist motion. The piezoelectric nanogenerator placed at the bottom of the wrist generated up to 4.78 V per wrist motion.

6 June 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
KEKhaled Ayman Eltoukhy
Khaled Ayman Eltoukhy
MEMohammed Elkholy
Mohammed Elkholy
MTMohamed W. Tawfik
Mohamed W. Tawfik
JSJohn Shihat
John Shihat
MSMarc Sarquella
Marc Sarquella
Mohamed SerryMohamed Serry
Mohamed Serry
This paper presents a methodology for fabricating a strain sensor designed explicitly for respiratory monitoring. The sensor’s high gauge factor and low stiffness make it particularly suitable for application to patients who cannot tolerate high stress on their chest, such as infants or the elderly. The sensor comprises a flexible polymeric spring coated with a carbon-based nanocomposite acting as the active layer. Different weight percentages of carbon-based materials are used to determine the percolation threshold, and the percolation threshold was determined to be at 4.75 and 4.25 wt% of graphene and MWCNTs with maximum gauge factors of 949.02 and 117.52, respectively. SEM and gauge factor analysis showed that a higher loading would lead to a more brittle sensor and premature failure due to the contrast in mechanical properties between the active layer and the flexible substrate. A cyclic fatigue test was done on the strain sensor under normal operating conditions. The sensor was able to withstand a total of 21600 cycles without failure with some relatively consistent signal. Additionally, we study the effectiveness of utilizing respiratory signals for sleep apnea event prediction using Short-Time Fourier transforms and 2D Convolutional Neural Networks, a suitable use case for fabricated sensors. The results provide a 1-3% improvement in accuracy over traditional baselines that utilize raw signal data.