Xiao Chen

Dr. Xiao Chen

Civil and Environmental Engineering, Rutgers, New Brunswick, New Jersey, USA
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 September 2023 in Materials and Corrosion
Verified
Journal Article
Closed access
EFEmadoddin Majdabadi Farahani
Emadoddin Majdabadi Farahani
YSYuhan Su
Yuhan Su
Xiao ChenXiao Chen
Xiao Chen
HWHao Wang
Hao Wang
TLTyler R. Laughorn
Tyler R. Laughorn
QHQindan Huang
Qindan Huang

1 August 2019 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
WZWeiguang Zhang
Weiguang Zhang
SSShihui Shen
Shihui Shen
SWShenghua Wu
Shenghua Wu
Xiao ChenXiao Chen
Xiao Chen
JXJiayue Xue
Jiayue Xue
LMLouay N. Mohammad
Louay N. Mohammad
The effects of in-place volumetric properties on the rutting and cracking of asphalt pavement are of great interest to the pavement industry. As such, the major objectives of this paper are to determine the volumetric properties that correlate with field rutting and cracking and to quantify the field performance difference between low and high magnitudes of the determined volumetric properties. This study included 71 pavement sections from 24 field test roads that were part of the National Cooperative Highway Research Program (NCHRP) 09-49A project and covered different mix designs, volumetric property ranges, pavement ages, and four climate zones across the United States. The volumetric properties investigated are in-place air voids, voids in mineral aggregate (VMA), voids filled with asphalt (VFA), asphalt film thickness, and effective binder content (Vbe ). Rutting and cracking (transverse and longitudinal) performance data for all the test sections were collected in accordance with the Long-Term Pavement Performance program’s Distress Survey Manual. The authors identified the volumetric properties that correlated well with field performance and determined threshold values using the fuzzy clustering method to divide the identified volumetric properties into two groups: one with relatively small values, and the other with relatively large values. The rutting and cracking between the two groups were then compared. The results indicate that in wet climate areas, higher in-place air void percentages and lower VFA values correlate with more top-down longitudinal cracking. The sensitivity of the in-place air voids was sufficient to distinguish differences in cracking, whereas VFA sensitivity was not able to do so. Also, thicker asphalt film correlated with less field transverse cracking. The variables that clearly affected rutting were the VMA and Vbe , whereby lower Vbe values indicated better rutting resistance. However, Vbe was unable to distinguish rut depths of various magnitudes. The effect of VMA on rut depth is complicated and there might be a sensitive range of VMA within which the rutting resistance of asphalt pavement can be more sensitive.

12 March 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Weiguang ZhangWeiguang Zhang
Weiguang Zhang
FTFanlong Tang
Fanlong Tang
GXGang Xu
Gang Xu
Huang XiaomingHuang Xiaoming
Huang Xiaoming
Meng LingMeng Ling
Meng Ling
JXJiayue Xue
Jiayue Xue
Fatigue resistance quantification of modified asphalt is typically time consuming and may not correlate well with mixture fatigue test results. In this paper, the applicability of a multiple stress creep and recovery (MSCR) test on asphalt binder’s fatigue resistance was evaluated. Six binder types with a variety of modifiers and different modifier contents were characterized. The MSCR test was conducted and its sensitivity to binder type and additive content under different aging durations was evaluated. Mixture fatigue tests including a semi-circular bending- Illinois flexibility index test and indirect tensile strength were conducted using control base asphalt and SBS modified asphalt. A ranking between the binder MSCR and mixture fracture test results was conducted to check if the MSCR result was representative of the mixture’s fatigue resistance. Results indicate that the MSCR test at intermediate temperatures (20 °C, 25 °C, and 30 °C) can be performed with good repetitions. It was also found that the MSCR test was sensitive enough to differentiate the fatigue resistance among different binder types and additive contents. The ranking analysis shows that the binder MSCR test at intermediate temperatures showed a similar ranking to the mixture’s fatigue tests, indicating that the binder MSCR test could be potentially utilized to represent a mixture’s fatigue resistance where binder selection is a major concern. It was also found that the SBS modified binder showed the best crack resistance and was less affected by aging.

27 August 2020 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
Xiao ChenXiao Chen
Xiao Chen
Hao WangHao Wang
Hao Wang
CLChang Li
Chang Li
WZWeiguang Zhang
Weiguang Zhang
GXGuangji Xu
Guangji Xu
This paper used the finite element method to analyse surface water distribution characteristics on porous asphalt layer under unsaturated seepage, and further compared the critical rainfall intensity of porous asphalt pavements with different design parameters. In this study, the Richards equation was used to describe the unsaturated seepage, and the results were validated with experimental data. The results show that when the water accumulates on the pavement surface, it would firstly emerge at the lowest level of pavement along the longitudinal direction, and then spread along transverse and longitudinal directions. The water depth has no remarkable difference along the longitudinal direction while it differs a lot among different transverse positions. The distribution of surface water depth was analysed and the correlation between the surface water coverage in the transverse direction and the rainfall intensity was established with high R-square values. For pavements with different geometries, the porous layer thickness has the most remarkable effect on the critical rainfall intensity of porous asphalt pavements.

2 July 2022 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
BJBaiyu Jiang
Baiyu Jiang
Xiao ChenXiao Chen
Xiao Chen
Hao WangHao Wang
Hao Wang
This study aimed to develop an integrated approach to evaluate the groove depth effect on water depths and skid resistance on runway pavement. Finite element modelling of tire-water-pavement interaction was developed to calculate pavement friction coefficient of aircraft tire. Spatial distribution of water film depth was obtained based on analytical modelling and validated with field measurements. The results show that the thicker water film depth and the smaller friction coefficient are expected with the smaller groove depth. The effect of groove depth becomes more significant in the region close to the centerline of runway. The non-uniform distribution of water film depth would cause different skid resistance encountered by aircraft tires and increase safety risk of landing when aircraft wander happens. The developed simulation approach can be used to determine the threshold of groove depth for maintenance treatment considering rainfall condition, aircraft operation, and geometry of runway.

18 April 2019 in Materials
Verified
Journal Article
Open access
PDF file
Guangji XuGuangji Xu
Guangji Xu
Xiao ChenXiao Chen
Xiao Chen
SZShichao Zhu
Shichao Zhu
LKLingdi Kong
Lingdi Kong
Huang XiaomingHuang Xiaoming
Huang Xiaoming
FTFanlong Tang
Fanlong Tang
When a fire takes place in a tunnel, the surface of the asphalt pavement will burn and release a large amount of smoke, which is toxic to human health. Thus, in order to prevent the combustion of the asphalt pavement under fire, it is necessary to propose some methods to retard its physical and chemical reaction under the high temperature. In this study, ten different combinations of fire retardants and a control case where no fire retardant was applied were prepared for evaluation. The thermogravimetric (TG)–mass spectrometry (MS) tests were used to evaluate their effect on the fire retardance from mass and energy perspectives and the Fire Dynamics Simulator (FDS) software was used to evaluate the fire retardance from temperature and smoke distribution perspectives. In experimental analysis, the TG (thermogravimetric) and DTG (differential thermogravimetric) curves were used to analyze the mass loss rate and residual mass of the asphalt and the activation energy was calculated and analyzed as well. In addition, decay rate of mass loss rate and increasing rate of activation energy were proposed to evaluate the ease of combustion of the asphalt with and without fire retardants. The results show that in laboratory experiments, the fire retardant combination which includes 48% aluminum hydroxide, 32% magnesium hydroxide, 5% expanded graphite, and 15% encapsulated red phosphorous would lead to an improved effect of fire retardance. In numerical modeling, the temperature and smoke height distribution over time were adopted to evaluate the fire retardance effect. The temperature distribution was found to be symmetrical on both sides of the combustion point and the same combination as proposed in experimental analysis was found to have the best effect on fire retardance due to the largest decrease in temperature. Additionally, because of the highest smoke height distribution, an improved effect on smoke suppression was also found when this combination was applied.