13 June 2023 in IEEE Journal of Oceanic Engineering
Direct communication across the water-air interface has attracted wide attention because of its potential applications in integrated air-sea networking. In this article, three different cross-medium communication systems have been proposed, including line-of-sight (LOS) optical links, laser-induced acoustic (LIA) systems, and translational acoustic radio frequency (TARF) systems. However, LOS optical links are sensitive to turbid water, misalignment of the transmitters/receivers, and the influence of surface waves. LIA systems are unstable with poor repeatability. TARF systems require the alignment of transmitters/receivers. Moreover, in situations where the location of detection points is required to be frequently moved for flexible communication, LOS optical links, and TARF systems both failed. This article proposes a cross-medium focused phased array (CMFPA) model, which is a multiple-input single-output system, to enlarge the detection area and increase the overall wave amplitude at the water surface. Theoretical analyses and experimental results indicate that the CMFPA can relax the requirement of precise alignment between communication nodes and improve performance in cross-medium communication when compared to a single-input single-output system. The study is expected to provide a foundation for cross-medium communication between underwater and airborne nodes in misaligned transmitters/receivers scenarios.
22 February 2024 in Ocean Engineering
14 February 2024 in IEEE Journal of Oceanic Engineering
As the demand for ocean observations increases, the quality requirements for sonar imaging are becoming increasingly exacting. The temporal synthesis strategy provides the acoustic-lens-based forward-looking sonar (ALFLS) with ultrahigh resolution but also causes the imaging content to be distorted when the sonar is moving at a high speed. This limits the application of sonar to low-speed or stationary underwater inspections. In this article, we formally define this distortion effect for the first time as an acoustic rolling shutter (ARS) effect and use implicit neural representation to naturally recover and represent acoustic images in a rectangular coordinate system for visual representation or subsequent computer tasks, e.g., image registration and image mosaicing. The method is self-supervised and involves only a single image, without the need for any external data input, e.g., from a global positioning system and a Doppler velocity log. We validate the effectiveness of the proposed method using experimental field data and reveal the potential application of this technique to underwater robot vision.
17 December 2024 in IEEE Journal of Oceanic Engineering
Recent advancements in acoustic and millimeter-wave technologies have enabled direct communication over water–air interfaces. This cross-medium communication involves three key steps: an underwater transducer emits acoustic waves that create surface vibrations, airborne radars detect these vibrations using millimeter waves, and finally, processed radar signals facilitate communication. However, this scheme suffers from short communication distances (approximately 1 m over water) and low resolution (millimetre level). In this article, a laser-acoustic cross-medium communication (LACMC) system is proposed and validated in anechoic tank experiments with the expectation of addressing the challenges of direct, high-precision, long-range communication across water--air interfaces for integrated air--sea networking. We analyze signal transmission through underwater, water surface, and air mediums and establish a robust LACMC channel model, which was verified by experiments. Experimental results prove that the channel is time-invariant and frequency-selective, with a single direct path and no multipath effects. We further enhance cross-medium communication quality by designing appropriate transmitted signals based on channel characteristics and employing laser Doppler vibrometry for high-precision, noncontact measurements. Our experimental results demonstrate the system's efficacy in long-distance applications, achieving an underwater communication distance of 3.5 m and an above-water distance of 10.8 m. The study is expected to provide a foundation for direct, high-precision, and long-distance communication between underwater nodes and airborne nodes.
1 January 2026 in IEEE Journal of Oceanic Engineering
Due to the specific characteristics of underwater channels and the hostile ocean environment, it is challenging to provide reliable data transmissions in underwater acoustic communication networks (UACNs). Multipath routing (MR) has emerged as a promising solution to enhance transmission reliability by leveraging redundant paths to transmit data concurrently. However, MR is prone to cross-path interference, which will degrade transmission latency performance. To this end, this paper proposes an interference-avoidance and low-latency cross-layer multipath routing (ILMR) protocol to address the tradeoff between reliability and latency in MR. Specifically, ILMR considers the transmission latency as the optimization objective and formulates a constrained optimization problem that jointly optimizes path selection at the network layer and transmission scheduling at the medium access control layer. By cross-layer joint design, ILMR can reduce cross-path interference and achieve reliable MR with lower latency in UACNs. Furthermore, unlike most previous works on routing for UACNs that are only verified through simulations, we have also carried out field experiments, including an experiment in Minghui Lake, and a sea trial near Dongju Island in the Zhoushan Archipelago. Experimental results show that the proposed cross-layer MR scheme can improve network performance. Specifically, the transmission latency performance is reduced by about 30% and the packet delivery ratio performance is increased by about 5%.