Tae-Seong Kim

Mr. Tae-Seong Kim

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 May 2025 in Machines
Verified
Journal Article
Open access
PDF file
Tae-Seong KimTae-Seong Kim
Tae-Seong Kim
JYJun-Won Yang
Jun-Won Yang
KSKyung-Hun Shin
Kyung-Hun Shin
GJGang-Hyeon Jang
Gang-Hyeon Jang
CHCheol Han
Cheol Han
JCJang Young Choi
Jang Young Choi
This study investigates the electromagnetic analysis and optimal design of outer rotor type brushless DC (BLDC) motors for fan filter applications. The primary objective is to develop a method that integrates three-dimensional (3D) structural effects with efficient two-dimensional (2D) equivalent analysis. This study proposes a 2D equivalent analysis method that addresses the unique features of outer rotor type BLDC motors, particularly the permanent magnet (PM) overhang structure. This approach transforms the operating point on the B–H curve to facilitate accurate modeling in a 2D framework, overcoming traditional analysis limitations. An analytical method using spatial harmonics is introduced to derive essential electromagnetic quantities, namely flux linkage and back electromotive force (EMF). The method compensates for slot effects using the Carter coefficient, ensuring precise evaluation of circuit parameters and electromagnetic losses. To optimize motor performance, a multi-objective optimization technique is implemented using the Non-dominated Sorting Genetic Algorithm-II (NSGA-II), aiming to maximize both efficiency and power density. The research validates the proposed analytical approach against the finite element analysis method (FEM) results to confirm its accuracy.

8 November 2024 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
JYJun-Won Yang
Jun-Won Yang
Tae-Seong KimTae-Seong Kim
Tae-Seong Kim
Manh-Dung NguyenManh-Dung Nguyen
Manh-Dung Nguyen
YKYong-Joo Kim
Yong-Joo Kim
KSKyung-Hun Shin
Kyung-Hun Shin
JCJang Young Choi
Jang Young Choi
In this paper, a method for calculating the cogging torque and air-gap flux density of a surface-mounted permanent magnet machine (SPMSM) is studied. First, a simplified model of the SPMSM is presented for electromagnetic analysis, and the magnetic vector potential is derived using the governing equations based on Maxwell’s equations in a two-dimensional polar coordinate system. The air gap flux density is derived using appropriate boundary conditions, and based on analytical solutions, the cogging torque was calculated. The analysis results derived through the proposed method and the skew of the rotor, the skew angle and segment that satisfy the optimal cogging torque of SPMSMs are derived. The accuracy of the proposed method is verified through a comparison with the analysis results with the finite element method.

24 March 2025 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
SLSoojin Lee
Soojin Lee
Manh-Dung NguyenManh-Dung Nguyen
Manh-Dung Nguyen
KKKyeong-Won Kwak
Kyeong-Won Kwak
Tae-Seong KimTae-Seong Kim
Tae-Seong Kim
SESeok-Hyeon Eom
Seok-Hyeon Eom
JCJang Young Choi
Jang Young Choi
This study investigates the tapering rotor surface technique in an interior permanent magnet synchronous motor (IPMSM) for electric vehicle compressors. To achieve this, this article proposes a novel tapered rotor design with a nonuniform air gap, created by applying asymmetric shaping to the bridge region along the rotor radius. A conventional IPMSM with a uniform air gap produces a trapezoidal-shaped flux density, introducing high-order harmonics and causing certain drawbacks for the motor. This study selected the offset height of the eccentric center and the distance between the rotor radius and the magnet as improvement design variables. The proposed tapered rotor model, characterized by a nonuniform air gap, demonstrated better performance than the initial model. Subsequently, a stress analysis of the thinned barrier was conducted to validate the structural integrity of the proposed model. The key parameters, such as air-gap flux density, cogging torque, inductance, flux linkage, and efficiency maps, were compared between the initial and improved models using finite element method (FEM) and MATLAB simulations. The proposed tapering motor achieved a 36.36% reduction in cogging torque error rate and a 0.6% improvement in efficiency deviation at the primary operating point. A prototype of the conventional rotor model was manufactured, and its efficiency curve was verified, which showed good agreement with the FEM analysis results.

1 February 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
SKSu-min Kim
Su-min Kim
Tae-Seong KimTae-Seong Kim
Tae-Seong Kim
WJWoo-Sung Jung
Woo-Sung Jung
Manh-Dung NguyenManh-Dung Nguyen
Manh-Dung Nguyen
YKYong-Joo Kim
Yong-Joo Kim
JCJang Young Choi
Jang Young Choi
As rare-earth permanent magnet prices continue to fluctuate, interest in non-rare-earth permanent magnet-assisted synchronous reluctance motors (PMa-SynRMs) is increasing. However, non-rare-earth PMa-SynRMs have a multi-layer structure with interior permanent magnets to compensate for the low magnetic fields. Therefore, the rotor has several design parameters, and electromagnetic analysis is time-consuming. To overcome these challenges, magnetic equivalent circuit analysis was used to perform fast electromagnetic analysis of non-rare-earth PMa-SynRMs. In addition, the validity of the proposed method was confirmed through a comparison of the obtained results with those of finite element analysis.

12 November 2024 in Mathematics
Verified
Journal Article
Open access
PDF file
Manh-Dung NguyenManh-Dung Nguyen
Manh-Dung Nguyen
Tae-Seong KimTae-Seong Kim
Tae-Seong Kim
KSKyung-Hun Shin
Kyung-Hun Shin
GJGang-Hyeon Jang
Gang-Hyeon Jang
JCJang Young Choi
Jang Young Choi
Wound rotor synchronous condensers (WRSCs) are DC-excited rotor machines that utilize rotor winding instead of permanent magnets. Their voltage regulator controls the rotor field to generate or absorb reactive power, thereby regulating grid voltage or improving power factor. A key characteristic of a WRSC is the compounding curve, which shows the required rotor current under specific stator current and voltage conditions. This paper presents an approach for quickly calculating the electromagnetic parameters of a WRSC using a mathematical method. After determining magnetic flux density, induced voltage, and inductance through analytical methods, the Park and Clarke transformations are applied to derive the dq-frame quantities, enabling prediction of active and reactive powers and compounding curve characteristics. The 60 Hz model was evaluated through comparison with finite element method (FEM) simulations. Results of flux density, induced voltage, and the compounding curve under varying rotor and stator current conditions showed that the proposed method achieved comparable performance to FEM simulation while reducing computational time by half.

1 October 2026 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
JYJun-Won Yang
Jun-Won Yang
Tae-Seong KimTae-Seong Kim
Tae-Seong Kim
KSKyung-Hun Shin
Kyung-Hun Shin
CKChang-Woo Kim
Chang-Woo Kim
CHCheol Han
Cheol Han
JCJang Young Choi
Jang Young Choi