Anas Krime

Mr. Anas Krime

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2025 in Resources
Verified
Journal Article
Open access
PDF file
RZRachid Zarzouki
Rachid Zarzouki
NNNOUAYTI NORDINE
NOUAYTI NORDINE
HFHAMZA EL FADILI
HAMZA EL FADILI
Anas KrimeAnas Krime
Anas Krime
SHSoufiane HASNI
Soufiane HASNI
Elisabete P. CarreiroElisabete P. Carreiro
Elisabete P. Carreiro
The worldwide issue of surface water contamination by heavy metals is a matter of great concern, as it has the potential to affect human health. This study intended to compute heavy metal contamination and human health risks in surface water using the following pollution indices: heavy metal pollution index (HPI), contamination index (CI), metal index (MI), ecological risk index (ERI), human health risk and statistical analysis. For this purpose, eleven water samples were gathered and analyzed by ICP-AES for trace metals such as Pb, As, Zn, Cd, Cu, and Ni. The results showed that heavy metal concentrations varied significantly throughout the study area, with Pb, As, and Cd levels exceeding the WHO limits for drinking purposes. Pollution indices indicated low to high water contamination, with HPI results ranging from 16.41 to 862.18 and from 12.76 to 774.03, above the critical value of 100, requiring serious interventions to reduce heavy metal pollution. MI results range from 0.90 to 20.92 and from 0.70 to 18.41 and CI values range from 0.34 to 20.38 and from 0.15 to 17.86 in the dry and wet periods, respectively, with different contamination levels observed throughout the study area; ERI showed low to considerable ecological risk. Nonetheless, the non-carcinogenic risk, THI < 1, indicates low health risks, while the carcinogenic risk for As and Cd was significantly higher than the negligible threshold of 10−6, suggesting tolerable health risks. However, managing the contaminated area and minimizing the metal concentrations and predominant routes through which metals impact human health should be priorities for long-term development and to establish a favorable environment.

23 June 2025 in Materials Research Bulletin
Verified
Journal Article
Open access
Anas KrimeAnas Krime
Anas Krime
MEMiriam Rita Eloufir
Miriam Rita Eloufir
SSSanaâ Saoiabi
Sanaâ Saoiabi
Mouhaydine TlemcaniMouhaydine Tlemcani
Mouhaydine Tlemcani
ManuelaMorais MoraisManuelaMorais Morais
ManuelaMorais Morais
ASAhmed Saoiabi
Ahmed Saoiabi

20 July 2025 in Recycling
Verified
Journal Article
Open access
PDF file
Anas KrimeAnas Krime
Anas Krime
SSS Saoiabi
S Saoiabi
Mouhaydine TlemcaniMouhaydine Tlemcani
Mouhaydine Tlemcani
ASAhmed Saoiabi
Ahmed Saoiabi
Elisabete P. CarreiroElisabete P. Carreiro
Elisabete P. Carreiro
MCManuela Ribeiro Carrott
Manuela Ribeiro Carrott
Moroccan oil shale ash (MOSA) represents an underutilized industrial by-product, particularly in the Rif region, where its high mineral content has often led to its neglect in value-added applications. This study highlights the successful conversion of MOSA into amorphous mesoporous silica (AS-Si) using a sol–gel process assisted by polyethylene glycol (PEG-6000) as a soft template. The resulting AS-Si material was extensively characterized to confirm its potential for environmental remediation. FTIR analysis revealed characteristic vibrational bands corresponding to Si–OH and Si–O–Si bonds, while XRD confirmed its amorphous nature with a broad diffraction peak at 2θ ≈ 22.5°. SEM imaging revealed a highly porous, sponge-like morphology composed of aggregated nanoscale particles, consistent with the nitrogen adsorption–desorption isotherm. The material exhibited a specific surface area of 68 m2/g, a maximum in the pore size distribution at a pore diameter of 2.4 nm, and a cumulative pore volume of 0.11 cm3/g for pores up to 78 nm. DLS analysis indicated an average hydrodynamic diameter of 779 nm with moderate polydispersity (PDI = 0.48), while a zeta potential of –34.10 mV confirmed good colloidal stability. Furthermore, thermogravimetric analysis (TGA) and DSC suggested the thermal stability of our amorphous silica. The adsorption performance of AS-Si was evaluated using methylene blue (MB) and ciprofloxacin (Cipro) as model pollutants. Kinetic data were best fitted by the pseudo-second-order model, while isotherm studies favored the Langmuir model, suggesting monolayer adsorption. AS-Si could be used four times for the removal of MB and Cipro. These results collectively demonstrate that AS-Si is a promising, low-cost, and sustainable adsorbent derived from Moroccan oil shale ash for the effective removal of organic contaminants from aqueous media.

21 June 2025 in Next Materials
Verified
Journal Article
Open access
SLSouhayla Latifi
Souhayla Latifi
SSSanaa Saoiabi
Sanaa Saoiabi
MAMohammed M. Alanazi
Mohammed M. Alanazi
OBOmar Boukra
Omar Boukra
Anas KrimeAnas Krime
Anas Krime
Noureddine AbidiNoureddine Abidi
Noureddine Abidi

15 May 2026 in Physchem
Verified
Journal Article
Open access
PDF file
HFHOUDA FOULAH
HOUDA FOULAH
Anas KrimeAnas Krime
Anas Krime
SASOUMIA ABOUL-HROUZ
SOUMIA ABOUL-HROUZ
NONaoual OUCHITACHNE
Naoual OUCHITACHNE
Elisabete P. CarreiroElisabete P. Carreiro
Elisabete P. Carreiro
MOMina Oumam
Mina Oumam
Given the depletion of conventional oil and gas resources, oil shale represents a promising alternative source of hydrocarbons that can be recovered through pyrolysis. This study examines the thermal decomposition of raw oil shale from the Tarfaya deposit and its decarbonized concentrate, studied by thermogravimetric analysis at different heating rates (5, 10, 20 and 40 °C/min). Pretreatment with acetic acid enabled the selective removal of calcite, confirmed by elemental, XRF, and XRD analyses, which revealed a relative enrichment in silica and dolomite in the oil shale concentrate. Pyrolysis of the raw shale occurs primarily between 300 and 500 °C, with a conversion rate of approximately 30%. In contrast, for the oil shale concentrate, the pyrolysis process begins at a relatively low temperature, within a wider temperature range (260–520 °C). Kinetic analysis based on Flynn–Wall–Ozawa (FWO) and Kissinger–Akahira–Sunose (KAS) methods shows that at a conversion rate of 60%, the activation energy achieves 14.09 kJ/mol and 10.78 kJ/mol, respectively. The results indicate that the selective removal of calcite by acetic acid treatment facilitates kerogen pyrolysis by reducing mineral–organic interactions. Indeed, calcite dilutes the reactive organic fraction and can act as a physical barrier limiting heat and mass transfer within the oil shale. Its removal improves, on the one hand, the accessibility of kerogen to thermal cracking and promotes its decomposition, and on the other hand, reduces the amount of residue after pyrolysis. In addition, the kinetic analysis based on Criado master curves reveals changes in the reaction mechanism after decarbonation treatment depending on the heating rate (β). A shift from a two-dimensional Avrami–Erofeev model (A2) to a three-dimensional model (A3) was observed at a low heating rate (β = 5 °C/min), suggesting a change in nucleation and growth dynamics during kerogen decomposition. At high heating rates (10, 20 and 40 °C/min), the thermal decomposition of kerogen combines several reaction mechanisms depending on the temperature range considered.

1 July 2026 in Mediterranean Geoscience Reviews
Verified
Journal Article
Closed access
PDF file
RZRachid Zarzouki
Rachid Zarzouki
NNNOUAYTI NORDINE
NOUAYTI NORDINE
HFHAMZA EL FADILI
HAMZA EL FADILI
Anas KrimeAnas Krime
Anas Krime
RNRaz Nawzad Noori
Raz Nawzad Noori
SHSoufiane HASNI
Soufiane HASNI