This work presents an extensive experimental and numerical analysis, aimed at investigating the impact of shelf-like fences applied on the suction side of a turbine nozzle guide vane. The cascade is constituted of vanes characterized by long chord and low aspect ratio, which are typical features of some LPT first stages directly downstream of an HPT, hence presenting high channel diffusion, especially near the tip. In particular, the present study complements existing literature by highlighting how blade fences positioned on the suction side can reduce the penetration of the large passage vortex. This is particularly effective in applications where flow turning is limited, the blades are lightly loaded at the front, and the horseshoe vortex is weak. The benefits of the present fence design in terms of losses and flow uniformity at the cascade exit plane have been demonstrated by means of a detailed experimental campaign carried out on a large-scale linear cascade in the low-speed wind tunnel installed in the Aerodynamics and Turbomachinery Laboratory of the University of Genova. Measurements mainly focused on the characterization of the flow field upstream and downstream of straight and fenced vane cascades using a five-hole pressure probe, to evaluate the impact of the device in reducing secondary flows. Furthermore, experiments were also adopted to validate both low-fidelity (RANS) and high-fidelity (LES) simulations and revealed the capability of both simulation approaches to accurately predict losses and flow deviation. Moreover, the accuracy in high-fidelity simulations has enabled an in-depth investigation of how fences act mitigating the effects of the passage vortex along the blade channel. By comparing the flow fields of the configurations with and without fences, it is possible to highlight the mitigation of secondary flows within the channel.
In the present study, spatial dynamic mode decomposition (DMD) is applied to experimental data of flat plate laminar separation bubbles, accounting for variations in Reynolds number, free-stream turbulence intensity, and streamwise adverse pressure gradient representative of low-pressure gas turbine blade operating conditions. Measurements are performed using particle image velocimetry (PIV). For each flow case, PIV snapshots are divided into temporal subsets, within which DMD is performed on fixed-size blocks shifted in the streamwise direction to span the entire domain. This approach enables the decomposition of the flow into modes characterized by streamwise wavenumbers and growth/decay rates, providing insight into the spatial evolution of shear layer disturbances as the flow parameters vary. By identifying the mode with the highest growth rate within each block, a statistical representation of growth rate and wavenumber distributions along the streamwise direction is obtained. The analysis shows that increasing the Reynolds number shifts the peak growth rate location upstream, in agreement with the upstream displacement of the maximum bubble thickness, and increases the streamwise wavenumber, corresponding to smaller characteristic length scales. Notably, the streamwise wavenumber exhibits a sudden change below a critical Reynolds number, reflecting the transition from short to long separation bubbles. While the peak growth rate location (linked to the transition position) can guide the design and placement of flow-control strategies on the blades, the streamwise-averaged wavenumber can provide a simple yet effective supplementary metric to distinguish bubble states and identify the onset of bursting.