1 November 2000 in Engineering Geology
8 March 2006 in Granular Matter
1 December 1997 in Engineering Geology
26 December 2017 in Geophysical Research Letters
1 May 2006 in International Journal of Geomechanics
SLSebastian Lobo-Guerrero
Granular materials forming part of natural slopes, embankments, subgrades of foundations, and pavement structures are subjected to both static and dynamic loads during their engineering lives. As a result of these loads, particle crushing may occur. The present study demonstrates that the discrete-element method (DEM) can be used to visualize the evolution of this breakage process. In particular, the evolution of crushing in a simulated granular material subjected to uniaxial compression is presented. Even though DEM does not normally consider particle breakage, it is possible to simulate crushing by replacing one particle that has failed in tension with a combination of many particles of different sizes. The results from the simulation indicate that crushing does not develop uniformly throughout the sample, but rather concentrates in certain regions. These observations agree with experimental results of uniaxial tests conducted on sand. Other results from the simulation satisfactorily agree with experime...
1 October 2005 in Journal of Geotechnical and Geoenvironmental Engineering
Granular materials forming part of civil engineering structures are subjected to both static and dynamic loads. As a result of these loads, particle crushing occurs. This study focuses on the evolution of crushing in a simulated granular material subjected to a direct shear test. It was found that the discrete element method (DEM) can be used to visualize and understand the evolution of crushing experienced by a granular material during this test. Even though DEM does not normally consider particle breakage, it is possible to simulate crushing by replacing one particle that has failed in tension with a combination of many particles of different sizes. One simulation indicated that crushing did not develop uniformly throughout the sample, and the sample tended to achieve a fractal distribution of particle sizes. The changes in other properties of the simulated granular material such as porosity and shear strength were also recorded, analyzed, and compared to the changes produced during another simulation w...