Seong Je Park

Prof. Dr. Seong Je Park

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2025 in Polymers
Verified
Journal Article
Open access
PDF file
JLJi Eun Lee
Ji Eun Lee
YSYong Son
Yong Son
Seong Je ParkSeong Je Park
Seong Je Park
Material extrusion (MEX) commonly requires support structures, and their rapid removal is essential for improving overall process efficiency. This study investigates the effect of nozzle speed on the crystallinity and dissolution behavior of polyvinyl alcohol (PVA) supports fabricated by MEX. The measured crystallinity values are 28.8%, 25.4%, and 23.7% at nozzle speeds of 20 mm/s, 60 mm/s, and 100 mm/s, respectively. Dissolution rates are measured as 0.2144%/min, 0.2378%/min, and 0.2544%/min at nozzle speeds of 20 mm/s, 60 mm/s, and 100 mm/s, respectively. These results demonstrate that nozzle speed is a key parameter that governs both crystallinity and dissolution behavior of PVA. As a result, higher nozzle speeds not only shorten fabrication time but also produce supports with lower crystallinity. Thus, support structures can be removed more quickly and efficiently at high nozzle speeds. This work provides a new perspective on accelerating support dissolution, demonstrating that PVA crystallinity can be tailored through process parameter control in MEX from a chemical viewpoint, rather than relying on conventional physical approaches.

8 December 2025 in Materials
Verified
Journal Article
Open access
PDF file
HJHan JaeMin
Han JaeMin
SKSeongjun Kim
Seongjun Kim
JLJi Eun Lee
Ji Eun Lee
YSYong Son
Yong Son
Seong Je ParkSeong Je Park
Seong Je Park
The parts fabricated using the material extrusion (MEX) process exhibit anisotropic mechanical properties depending on the build orientation, primarily due to incomplete interlayer bonding. In this study, a new polycarbonate (PC) is adopted, and the anisotropic behavior of parts produced from this material is quantitatively investigated in MEX. First, we examine the deformation behavior of the material extruded (MEXed) parts according to chamber temperature. Additionally, we evaluate the surface roughness of MEXed parts as a function of the nozzle temperature. Finally, to identify the tensile strength anisotropy, tensile tests are conducted on MEXed specimens in two deposition directions using three nozzle temperatures that produced superior surface roughness. As a result, a PC adopted in this study exhibits relatively low tensile strength anisotropy, indicating that it is well suited for the MEX. Overall, this study not only provides a systematic procedure for optimizing the process parameters when adapting a new polymer to MEX, but also offers practical guidance for evaluating tensile strength anisotropy to determine whether the material is suitable for MEX.

5 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
JKJaerin Kim
Jaerin Kim
DKDonghyeon Kim
Donghyeon Kim
JLJeongin Lee
Jeongin Lee
Seong Je ParkSeong Je Park
Seong Je Park
In this study, the geometric and compressive characteristics of a rhombicuboctahedron architecture fabricated by material extrusion were investigated. The compressive results showed that increasing the number of unit cells led to the specific compressive strength remaining nearly constant. In contrast, as the strut thickness increased, the structures exhibited higher compressive strength, specific compressive strength, and elastic modulus. In particular, the thickest configuration exhibited no premature fracture or abrupt stress drop, instead demonstrating a progressive densification behavior with continuously increasing stress. Furthermore, a pallet prototype was fabricated to demonstrate practical feasibility. The non-cubic, recessed geometry of the rhombicuboctahedron units enabled geometric interlocking between stacked pallets, increasing surface-induced friction and contributing to enhanced stacking stability and anti-slip performance. These results demonstrate the potential of rhombicuboctahedron architectures as lightweight, scalable, and mechanically reliable structural elements for compression-dominated applications enabled by additive manufacturing.

30 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
DKDonghui Kim
Donghui Kim
Seong Je ParkSeong Je Park
Seong Je Park
SMSeung Ki Moon
Seung Ki Moon
This study proposes an adaptive nozzle design for material extrusion-based food additive manufacturing (AM), integrating both mathematical modeling and finite element analysis. A theoretical framework is developed to correlate extrusion radius and nozzle diameter with process parameters such as feeding speed, nozzle velocity, and shear rate. The proposed model is extended to estimate volumetric extrusion rate and incorporate rheological parameters using the Hagen–Poiseuille relation. To validate the derived equations, static structural simulations are conducted in a computer simulation under varying pressures, nozzle diameters, temperatures, and input feeding diameters. The simulation results show that increased pressure and higher temperatures enhance extrusion efficiency, while larger nozzles and feeding diameters reduce flow resistance and improve extrusion stability. Collectively, these findings validate the predictive capability of the mathematical model and highlight the feasibility of adaptive nozzle systems for optimizing extrusion performance in food AM. The study provides a preliminary foundation for the future development of dynamic nozzle control strategies that enable improved print fidelity and process flexibility.

11 July 2026 in Journal of Mechanical Science and Technology
Verified
Journal Article
Closed access
PDF file
HBHan Bae
Han Bae
SLSeungyun Lee
Seungyun Lee
JLJi Eun Lee
Ji Eun Lee
Seong Je ParkSeong Je Park
Seong Je Park
YSYong Son
Yong Son

1 October 2026 in Journal of the Korean Society for Precision Engineering
Verified
Journal Article
Open access
PDF file
JLJungwon Lee
Jungwon Lee
JKJeongmin Kim
Jeongmin Kim
SSSeokjin Shin
Seokjin Shin
GPGideok Park
Gideok Park
Seong Je ParkSeong Je Park
Seong Je Park
Directed energy deposition (DED) enables the efficient fabrication and repair of large metal components. However, repeated reuse of the powder generates degraded particles, which must be removed by sieving. This study used scanning electron microscopy and laser diffraction particle size analysis to characterize the sieve-rejected Inconel Alloy 939 powder collected sequentially after each of four DED processing cycles (R1–R4). The rejected powder consistently contained elongated, irregular, and satellite-attached particles, and its particle size increased progressively with each reuse cycle. The mean particle size increased by 16.8%, from 51.1 μm for R1 to 59.7 μm for R4. The D10, D50, and D90 values also increased, with D90, for example, rising from 71.5 to 82.2 μm. These results suggest that sieving may serve as an important quality control step for maintaining powder quality when the powder is repeatedly reused in DED.