Any implant or prosthesis replacing a function or functions of an organ or group of organs should be biologically and sensorily integrated with the human body in order to increase their acceptance with their user. If this replacement is for a human hand, which is an important interface between humans and their environment, the acceptance issue and developing sensory-motor embodiment will be more challenging. Despite progress in prosthesis technologies, 50-60% of hand amputees wear a prosthetic device. One primary reason for the rejection of the prosthetic hands is that there is no or negligibly small feedback or tactile sensation from the hand to the user, making the hands less functional. In fact, the loss of a hand means interrupting the closed-loop sensory feedback between the brain (motor control) and the hand (sensory feedback through the nerves). The lack of feedback requires significant cognitive efforts from the user in order to do basic gestures and daily activities. To this aim, recently, there has been significant development in the provision of sensory feedback from transradial prosthetic hands, to enable the user take part in the control loop and improve user embodiment. Sensory feedback to the hand users can be provided via invasive and noninvasive methods. The latter includes the use of temperature, vibration, mechanical pressure and skin stretching, electrotactile stimulation, phantom limb stimulation, audio feedback, and augmented reality. This paper provides a comprehensive review of the non-invasive methods, performs their critical evaluation, and presents challenges and opportunities associated with the non-invasive sensory feedback methods.

This study aims to investigate the effects of various design parameters on the actuation performance of a pneumatic network actuator (PNA), optimise its structure using the finite element method (FEM), and subsequently quantify the performance of the resulting actuator topology experimentally. The effects of the structural parameters, including the operation pressure, the wall thickness and the gap between the chambers, bottom layer thickness, and the geometry of the channel cross section, on the deformation and bending angle of the actuator were evaluated to optimise the performance of the pneumatic actuator. A Global Analysis of Variance (ANOVA) was performed to investigate how the variables affect the mechanical output of the actuator and, thus, the significance of variables affecting the deformation (and bending angle) of the pneumatic actuator was identified. After the parameter optimisation, a pneumatic channel with a 4.5 mm bottom layer thickness, 1.5 mm wall thickness, and 1.5 mm gap between sequential chambers is recommended to perform optimised bending motion for the pneumatic network actuator. The optimised FE model results were verified experimentally. This design optimisation method based on the FEM and ANOVA analysis can be extended to the topology optimisation of other soft actuators.

Smart sensing devices enabled hydroponics, a concept of vertical farming that involves soilless technology that increases green area. Although the cultivation medium is water, hydroponic cultivation uses 13 ± 10 times less water and gives 10 ± 5 times better quality products compared with those obtained through the substrate cultivation medium. The use of smart sensing devices helps in continuous real-time monitoring of the nutrient requirements and the environmental conditions required by the crop selected for cultivation. This, in turn, helps in enhanced year-round agricultural production. In this study, lettuce, a leafy crop, is cultivated with the Nutrient Film Technique (NFT) setup of hydroponics, and the growth results are compared with cultivation in a substrate medium. The leaf growth was analyzed in terms of cultivation cycle, leaf length, leaf perimeter, and leaf count in both cultivation methods, where hydroponics outperformed substrate cultivation. The results of the ‘AquaCrop simulator also showed similar results, not only qualitatively and quantitatively, but also in terms of sustainable growth and year-round production. The energy consumption of both the cultivation methods is compared, and it is found that hydroponics consumes 70 ± 11 times more energy compared to substrate cultivation. Finally, it is concluded that smart sensing devices form the backbone of precision agriculture, thereby multiplying crop yield by real-time monitoring of the agronomical variables.

This article expounds the design and control of a new variable stiffness series elastic actuator (VSSEA). It is established by employing a modular mechanical design approach that allows us to effectively optimize the stiffness modulation characteristics and power density of the actuator. The proposed VSSEA possesses the following features: no limitation in the work range of output link; a wide range of stiffness modulation (∼20 N·m/rad to ∼1 KN·m/rad); low-energy-cost stiffness modulation at equilibrium and nonequilibrium positions; compact design and high torque density (∼36 N·m/kg); and high-speed stiffness modulation (∼3000 N·m/rad/s). Such features can help boost the safety and performance of many advanced robotic systems, e.g., a cobot that physically interacts with unstructured environments and an exoskeleton that provides physical assistance to human users. These features can also enable us to utilize variable stiffness property to attain various regulation and trajectory tracking control tasks only by employing conventional controllers, eliminating the need for synthesizing complex motion control systems in compliant actuation. To this end, it is experimentally demonstrated that the proposed VSSEA is capable of precisely tracking the desired position and force control references through the use of the conventional proportional–integral–derivative controllers.

Summary: This paper deals with the robust force and position control problems of series elastic actuators (SEAs). It is shown that an SEA’s force control problem can be described by a second-order dynamic model which suffers from only matched disturbances. However, the position control dynamics of an SEA is of fourth order and includes matched and mismatched disturbances. In other words, an SEA’s position control is more complicated than its force control, particularly when disturbances are considered. A novel robust motion controller is proposed for SEAs by using disturbance observer (DOb) and sliding mode control. When the proposed robust motion controller is implemented, an SEA can precisely track desired trajectories and safely contact with an unknown and dynamic environment. The proposed motion controller does not require precise dynamic models of environments and SEAs. Therefore, it can be applied to many different advanced robotic systems such as compliant humanoids, industrial robots and exoskeletons. The validity of the proposed motion controller is experimentally verified.

This paper proposes a new active disturbance rejection (ADR) based robust trajectory tracking controller design method in state space. It can compensate not only matched but also mismatched disturbances. Robust state and control input references are generated in terms of a fictitious design variable, namely differentially flat output, and the estimations of disturbances by using differential flatness (DF) and disturbance observer (DOb). Two different robust controller design techniques are proposed by using Brunovsky canonical form and polynomial matrix form approaches. The robust position control problem of a two mass-spring-damper system is studied to verify the proposed ADR controllers.