Charith Akalanka Dodangodage

Mr. Charith Akalanka Dodangodage

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 January 2026 in Phycology
Verified
Journal Article
Open access
PDF file
CDCharith Akalanka Dodangodage
Charith Akalanka Dodangodage
JKJagath C Kasturiarachchi
Jagath C Kasturiarachchi
IWInduwara Arsith Wijesekara
Induwara Arsith Wijesekara
TPThilini A Perera
Thilini A Perera
R.B. Sanjitha Dilan RajapaksheR.B. Sanjitha Dilan Rajapakshe
R.B. Sanjitha Dilan Rajapakshe
RHRangika Halwatura
Rangika Halwatura
The convergence of food insecurity, water scarcity, and environmental degradation has intensified the global search for sustainable agricultural models. Integrated Microalgal–Aquaponic Systems (IAMS) have emerged as a novel multi-trophic platform that unites aquaculture, hydroponics, and microalgal cultivation into a closed-loop framework for resource-efficient food production and water recovery. This critical review synthesizes empirical findings and engineering advancements published between 2008 and 2024, evaluating IAMS performance relative to traditional agriculture and recirculating aquaculture systems (RAS). Reported under controlled laboratory and pilot-scale conditions, IAMS have achieved nitrogen and phosphorus recovery efficiencies exceeding 95% while potentially reducing water consumption by up to 90% compared to conventional farming. The integration of microalgal photobioreactors enhances nutrient retention, may contribute to internal carbon capture, and enables the generation of diversified co-products, including biofertilizers and protein-rich aquafeeds. Nevertheless, significant barriers to commercial scalability persist, including the biological complexity of maintaining multi-trophic synchrony, high initial capital expenditure (CAPEX), and regulatory ambiguity regarding the safety of waste-derived algal biomass. Technical challenges such as photobioreactor upscaling, biofouling control, and energy optimization are critically discussed. Finally, the review evaluates the alignment of IAMS with UN Sustainable Development Goals 2, 6, and 13, and outlines future research priorities in techno-economic modeling, automation, and policy development to facilitate the transition of IAMS from pilot-scale innovations to viable industrial solutions.

10 December 2025 in Phycology
Verified
Journal Article
Open access
PDF file
CDCharith Akalanka Dodangodage
Charith Akalanka Dodangodage
HPHirasha Jayathri Premarathne
Hirasha Jayathri Premarathne
JKJagath C Kasturiarachchi
Jagath C Kasturiarachchi
TPThilini A Perera
Thilini A Perera
R.B. Sanjitha Dilan RajapaksheR.B. Sanjitha Dilan Rajapakshe
R.B. Sanjitha Dilan Rajapakshe
RHRangika Halwatura
Rangika Halwatura
Conventional petroleum-based protective coatings release high levels of volatile organic compounds (VOCs) and contribute to resource depletion, urging the development of environmentally responsible alternatives. Among the bio-based candidates, microalgae and Cyanobacteriophyta have recently gained attention for their ability to produce diverse biopolymers and pigments with intrinsic protective functionalities. However, existing literature has focused mainly on algal biofuels and general biopolymers, leaving a major gap in understanding their application as sustainable coating materials. This review addresses that gap by providing the first integrated assessment of algae-based protective coatings. It begins by defining abiotic and biotic surface degradation mechanisms, including microbiologically influenced corrosion, to establish performance benchmarks. The review then synthesizes recent findings on key algal components, including alginate, extracellular polymeric substances (EPS), and phycocyanin, linking biochemical composition to functional performance, techno-economic feasibility, and industrial scalability. It evaluates their roles in adhesion strength, UV stability, corrosion resistance, and antifouling activity. Reported performance metrics include adhesion strengths of 2.5–3.8 MPa, UV retention above 85% after 2000 h, and corrosion rate reductions of up to 40% compared with polyurethane systems. Furthermore, this study introduces the concept of carbon-negative, multifunctional coatings that simultaneously protect infrastructure and mitigate environmental impacts through CO2 sequestration and pollutant degradation. Challenges involving biomass variability, processing costs (>USD 500/ton), and regulatory barriers are critically discussed, with proposed solutions through hybrid cultivation and biorefinery integration. By bridging materials science, environmental engineering, and sustainability frameworks, this review establishes a foundation for transforming algae-based coatings from laboratory research to scalable, industrially viable technologies.

14 January 2026 in Phycology
Verified
Journal Article
Open access
PDF file
CDCharith Akalanka Dodangodage
Charith Akalanka Dodangodage
GGGeethaka Nethsara Gamage
Geethaka Nethsara Gamage
IWInduwara Arsith Wijesekara
Induwara Arsith Wijesekara
JKJagath C Kasturiarachchi
Jagath C Kasturiarachchi
TPThilini A Perera
Thilini A Perera
RHRangika Halwatura
Rangika Halwatura
The valorization of nutrient-rich institutional effluents represents a promising route for sustainable algal biotechnology. This study investigates the potential of canteen wastewater (CW) as an alternative culture medium for Spirulina platensis, integrating wastewater treatment with high-value carotenoid and lipid production. Growth performance, biochemical composition, and nutrient removal efficiencies were systematically evaluated in 2 L photobioreactors under optimized conditions. Spirulina cultured in 75% CW under 180 μmol photons m−2 s−1 achieved a biomass productivity of 0.071 g L−1 day−1, nearly three-fold higher than the synthetic BG-11 control (0.023 g L−1 day−1). Nutrient remediation was highly efficient, with 92.12% nitrate and 90.05% phosphate removal, effectively reducing effluent concentrations below discharge limits. Biochemical profiling revealed that wastewater-grown biomass contained 54.3% protein and 7.85% lipids, with a remarkable carotenoid yield of 21.81 mg g−1 DW—significantly higher than the control (6.85 mg g−1 DW). Mechanistic analysis suggests that the balanced nutrient stoichiometry (C:N:P ≈ 30:4:1) and mixotrophic conditions enhanced biomass quality while mitigating ammonia toxicity. This study demonstrates the first integrated application of canteen wastewater for dual-purpose bioremediation and pigment-rich biomass production, establishing a scalable circular bioeconomy framework for institutional waste management.

27 February 2026 in Textiles
Verified
Journal Article
Open access
PDF file
KFKavini Vindya Fernando
Kavini Vindya Fernando
CDCharith Akalanka Dodangodage
Charith Akalanka Dodangodage
VSVinalee Maleeshi Seneviratne
Vinalee Maleeshi Seneviratne
SJSanduni Maleesha Jayasinghe
Sanduni Maleesha Jayasinghe
PDP Dhammika Dharmaratne
P Dhammika Dharmaratne
RHRangika Halwatura
Rangika Halwatura
The construction sector faces increasing pressure to reduce the embodied energy of building materials while valorizing industrial waste streams. This study evaluates the direct incorporation of post-industrial textile waste (100% cotton and cotton–polyester blends) in its native form to develop high-performance cementitious ceiling sheets. Composites were fabricated under a controlled hydraulic compaction pressure of 2.0 MPa, optimized to achieve matrix densification while preserving the integrity of the fibrous network. Viscoelastic recovery of the compressed fibers induced a hierarchical double-porosity architecture characterized by macro-voids and hollow fiber lumens. This microstructural evolution reduced thermal conductivity to 0.091 W/m·K, approximately 50% lower than commercial cement–fiber benchmarks—without compromising mechanical compliance. Scanning Electron Microscopy (SEM) revealed a mechanistic decoupling between water absorption and dimensional stability. Although the CP15 formulation (15 wt.% cotton–polyester) exhibited high moisture uptake (~21%), thickness swelling remained limited to 1.35%. This dimensional stability is attributed to the hydrophobic polyester framework, which bridges microcracks and constrains hygroscopic expansion within the cellulosic phase. The optimized CP15 composite achieved a Modulus of Rupture (MOR) of 8.75 MPa, exceeding ISO 8336 Category C, Class 2 requirements. Despite increased thickness, the areal density (10.84 kg/m2) remains compatible with standard gypsum-grade suspension systems, eliminating the need for structural modification. These findings establish a scalable, direct-valorization strategy for circular construction materials delivering enhanced thermal insulation and robust performance under tropical climatic conditions.

23 March 2026 in Biomass
Verified
Journal Article
Open access
PDF file
CDCharith Akalanka Dodangodage
Charith Akalanka Dodangodage
GGGeethaka Nethsara Gamage
Geethaka Nethsara Gamage
LMLakru Mallawa
Lakru Mallawa
JKJagath C Kasturiarachchi
Jagath C Kasturiarachchi
KFKavini Vindya Fernando
Kavini Vindya Fernando
RHRangika Halwatura
Rangika Halwatura
The integration of microalgal cultivation with wastewater streams offers a promising pathway to enhance resource efficiency within circular bioeconomy frameworks. However, the suitability of clarified aquaponics sedimentation effluent for producing carbohydrate-rich microalgal biomass remains insufficiently evaluated, particularly with respect to nutrient recovery and bioethanol-relevant feedstock potential. In this study, clarified aquaponics sedimentation effluent was assessed as a cultivation medium for Chlorella sp. under controlled laboratory conditions. Biomass productivity, nutrient removal performance, and carbohydrate accumulation were systematically evaluated and compared with conventional synthetic medium. Chlorella sp. cultivated in clarified aquaponic effluent achieved a maximum biomass concentration of approximately 2.05 g L−1, exceeding that obtained in Bold’s Basal Medium. Carbohydrate content exceeded 40% of dry weight, indicating suitability for fermentable sugar production. Nitrate and phosphate removal efficiencies greater than 95% were achieved, with mass balance analysis confirming biological assimilation as the primary removal mechanism (~87.4%). This confirms the dual functionality of the system. The effective nutrient assimilation and confirmed the dual functionality of the system as both a biomass production and nutrient recovery process. Comparable performance under diluted and undiluted effluent conditions further indicated that freshwater dilution is not required following clarification. Light saturation was observed at 180–190 μmol m−2 s−1, providing guidance for energy-efficient operation. These findings demonstrate that clarified aquaponics effluent can serve as an effective alternative growth medium for producing carbohydrate-rich Chlorella sp. biomass while enabling nutrient recovery. The estimated bioethanol potential is theoretical, based on stoichiometric conversion assumptions, and experimental fermentation was not conducted. This work provides quantitative evidence supporting the integration of microalgae into aquaponic systems and establishes a foundation for future pilot-scale, techno-economic, and life-cycle assessments.

11 November 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
CDCharith Akalanka Dodangodage
Charith Akalanka Dodangodage
HPHirasha Jayathri Premarathne
Hirasha Jayathri Premarathne
JKJagath C Kasturiarachchi
Jagath C Kasturiarachchi
TPThilini A Perera
Thilini A Perera
R.B. Sanjitha Dilan RajapaksheR.B. Sanjitha Dilan Rajapakshe
R.B. Sanjitha Dilan Rajapakshe
RHRangika Halwatura
Rangika Halwatura
Conventional petroleum-based protective coatings release high levels of volatile organic compounds (VOCs) and contribute to resource depletion, urging the development of environmentally responsible alternatives. Among bio-based candidates, microalgae have recently gained attention for their ability to produce diverse biopolymers and pigments with intrinsic protective functionalities. However, existing literature has focused mainly on algal biofuels and general biopolymers, leaving a major gap in understanding their application as sustainable coating materials. This review addresses that gap by providing the first integrated assessment of algae-based protective coatings, linking biochemical composition, functional performance, techno-economic feasibility, and industrial scalability within a circular economy context. The review synthesizes recent findings on key algal components, including alginate, extracellular polymeric substances (EPS), and phycocyanin. It evaluates their roles in adhesion strength, UV stability, corrosion resistance, and antifouling activity. Reported performance metrics include adhesion strengths of 2.5–3.8 MPa, UV retention above 85% after 2000 hours, and corrosion rate reductions of up to 40% compared with polyurethane systems. Furthermore, this study introduces the concept of carbon-negative, multifunctional coatings that simultaneously protect infrastructure and mitigate environmental impacts through CO₂ sequestration and pollutant degradation. Challenges involving biomass variability, processing costs (>USD 500/ton), and regulatory barriers are critically discussed, with proposed solutions through hybrid cultivation and biorefinery integration. By bridging materials science, environmental engineering, and sustainability frameworks, this review establishes a foundation for transforming algae-based coatings from laboratory research to scalable, industrially viable technologies.