shaobin li

Dr. shaobin li


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Yongxiang XuYongxiang Xu
Yongxiang Xu
shaobin lishaobin li
shaobin li
JZJibin Zou
Jibin Zou
To promote the control performance of the modern high-precision permanent-magnet synchronous motor (PMSM) system on the existence of the time-delay and parameter mismatch, an improved deadbeat predictive current control (DPCC) method is proposed in this article. First, the conventional DPCC method considering the time-delay compensation is introduced. Along with this method, the negative influence on the control performance when the parameter mismatch occur is analyzed mathematically. Afterward, this article proposes a novel compensation scheme based on the integral sliding mode control (ISMC) theory for disturbance elimination. This proposed method incorporates the disturbance rejection term in the main control loop, which avoids the side effects of the traditional parallel external observer-based compensation method. The convergence of this disturbance rejection design is also proved. Meanwhile, the procedure of the ISMC-based DPCC method in digital implementation is illustrated and the resulting problems are discussed and solved. Furthermore, the chattering problem caused by the signum function is significantly suppressed by introducing the improved super-twisting algorithm combined method. Finally, experimental results confirm the validity of the proposed ISMC-based DPCC controller.

14 April 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
shaobin lishaobin li
shaobin li
Yongxiang XuYongxiang Xu
Yongxiang Xu
WZWentao Zhang
Wentao Zhang
JZJibin Zou
Jibin Zou
A novel robust deadbeat predictive direct speed control (RDP-DSC) method for permanent magnet synchronous motor is proposed to improve the speed control bandwidth and eliminate the conventional cascaded speed control structure. First, the basic DP-DSC method with one-step ahead time delay compensation is introduced briefly. Then, the control sensitivity analysis issue on the electrical and mechanical parameter mismatches, and external disturbance and inverter nonlinearity are inspirationally discussed. Further, based on the analysis above, a novel dual second-order sliding-mode disturbance observer (SOSMDO) structure is proposed for both current and speed disturbance suppression. The proposed RDP-DSC equipped with SOSMDO is presented with full control errors completely compensated. Meanwhile, the undesired chattering phenomenon caused by the switching function in the existing popular sliding-mode observers is eliminated by the proposed SOSMDO. Rich experiments are then performed, showing that the proposed method has strong enough robustness to various parameter mismatches and external disturbances while the system still holds the DSC methods’ advantages, such as high response speed and satisfying bandwidth.

12 July 2023 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
CLChengsi Liu
Chengsi Liu
LXLijun Xiao
Lijun Xiao
JZJibin Zou
Jibin Zou
Yongxiang XuYongxiang Xu
Yongxiang Xu
shaobin lishaobin li
shaobin li
This paper proposed a monitoring method for inter-turn short circuit (ITSC) fault for PMSM. The paper analyzes the electromagnetic performance of permanent magnet synchronous motor (PMSM) under single-phase ITSC fault working condition. On this basis, a new diagnosis method for ITSC fault based on 2 nd ripple of d -axis and q -axis current is proposed. The presence or absence of 2 nd current ripple indicates whether ITSC occurs, and the amplitude of the 2 nd current ripple can be used to identify the severity of ITSC fault. The correctness and effectiveness of the proposed method are verified by both FEA and prototype experiment.

23 August 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
shaobin lishaobin li
shaobin li
Yongxiang XuYongxiang Xu
Yongxiang Xu
WZWentao Zhang
Wentao Zhang
JZJibin Zou
Jibin Zou
In this article, a novel mode switching control (MSC) strategy is proposed containing a fast-response phase and a high-precision settling phase to meet the requirement of high-quality point-to-point permanent magnet synchronous motor servo systems. In the fast-response stage, an adaptive trajectory planning method is developed to program the q -axis current profile online based on the reference for the motor to reach the neighborhood of the reference position in minimum time. The chattering in the conventional time-optimal control is overcome and the idea that skipping speed and position loop with preplanned q -axis current trajectory is first attempted. After switching, the high-precision settling stage that is responsible for improving the transient performance in terms of reducing the overshoot and settling time is built with the proposed robust composite nonlinear feedback (RCNF) control law. This RCNF method cancels the overall disturbance through an extended state observer. The switching condition for the proposed MSC controller is clarified. Afterward, the whole closed-loop system's stability is strictly proved. Experiments are then conducted based on different scenarios to prove the effectiveness and robustness of the proposed MSC method.

12 December 2023 in IEEE Transactions on Control Systems Technology
Verified
Journal Article
Closed access
Yongxiang XuYongxiang Xu
Yongxiang Xu
shaobin lishaobin li
shaobin li
WZWentao Zhang
Wentao Zhang
Guodong YuGuodong Yu
Guodong Yu
JZJibin Zou
Jibin Zou
This article proposes a novel Laguerre function-based long-horizon constrained model predictive direct speed control strategy (CMP-DSC-Laguerre) for permanent magnet synchronous motor (PMSM) speed control. Compared with the traditional model predictive control (MPC) procedure, the introduction of Laguerre function parameterization reduces the computational burden, making long-horizon MPC feasible in real applications without compromising the system’s performance. The proposed design enables easier solutions to long prediction horizon MPC problems while improving system stability and speed control performance in both transient and steady states. Furthermore, the proposed controller intuitively incorporates a one-step-ahead control generation method to compensate for the time-delay effect in digital PMSM control systems. The resultant current and voltage constraints are modeled for the first time, and the control signal is then obtained by solving the corresponding optimization problem. Experimental validation of the proposed method shows its effectiveness and feasibility compared to conventional cascaded proportional–integral (PI) control, direct predictive speed control, and popular full cascaded MPC methods.

22 August 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DKDehao Kong
Dehao Kong
shaobin lishaobin li
shaobin li
LCLiu Chuang
Liu Chuang
ZZZhenbin Zhang
Zhenbin Zhang
YSYuanxiang Sun
Yuanxiang Sun
MHMarcelo Lobo Heldwein
Marcelo Lobo Heldwein
Robustness is a crucial issue in model predictive control despite the excellent dynamic performance and effective management of multiple variables that this control strategy provides for converters. This challenge is particularly concerning in solid-state dc transformers (DCT) connected as input-series-output-parallel modules because this type of DCT not only regulates the output voltage/power but also balances the input voltage so that the power is averagely distributed among submodules. Static errors and limited dynamics pose a threat to their operation and even safety. To tackle this issue, this article proposes a novel model-free predictive control based on an autoregressive moving average structure. Herein, the physical model of DCTs is completely replaced by a data-driven model. Combined with the recursive least square method with the forgetting factor, the control system will no longer rely on the electrical parameters, guaranteeing strong robustness. Meanwhile, an adaptive balance controller is also proposed, which adjusts the gain of shift angles with reduced computational burden. These achieve accurate power/voltage allocation among all submodules while maintaining a fast dynamic response. The experimental comparisons with other schemes verify the effectiveness and superiority of the proposed method.