Anan Suebsomran

Prof. Dr. Anan Suebsomran


Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2015 in Transactions of the Institute of Measurement and Control
Verified
Journal Article
Closed access
NNNgoc-Tan Nguyen
Ngoc-Tan Nguyen
ASAnan Suebsomran
Anan Suebsomran
KSKeattisak Sripimanwat
Keattisak Sripimanwat
NNNam-Hoang Nguyen
Nam-Hoang Nguyen
A key problem of mobile robots is that of the positioning capability in order to detect their locations in the operating environment. A promising technology used in indoor localization recently is Visible Light Communication (VLC). In this paper, an integrated Angle of Arrival-Received Signal Strength (AOA-RSS) localization method using the VLC, which could get high accuracy with simple hardware, is proposed. In addition, the Extended Kalman Filter (EKF) and Particle Filter (PF) algorithms are combined with the proposed AOA-RSS localization method in order to achieve higher accuracy of the mobile robot positioning. By computer simulation, the performance of the proposed AOA-RSS localization method combined with the EKF and PF algorithms are compared. The combination scheme outperforms the individual VLC localization with small error approximation of a few centimetres.

30 September 2019 in Measurement and Control
Verified
Journal Article
Open access
PDF file
ASAnan Suebsomran
Anan Suebsomran
Generally, robot gripper is the tool to enhancing the efficiency and ability of grasping task of robot manipulator. The interaction between the object and the grasping finger is the main target of robotic gripper design stage. For this research, robot gripper is then proposed as the new method of robot gripper force control using real-time estimate force feedback signal in order to achieve higher performance of grasping objects. Robot gripper kinematics is also analyzed and adjusted to more practical development. The object manipulation is also identifiable using recursive least square estimation technique of both hard and soft objects during grasping. Force controller of robot gripper is obtained using real-time estimate force feedback signal by the recursive least square method. Comparison of proportional–integral–derivative controller gains is tuned with different force feedback signals, normal force feedback, and estimate force feedback during grasping hard and soft objects validated by experiment. The results of design and development are illustrated by simulation and experimental methods. In addition, due to the limitation of electromagnetic interference, signals will not affect other instrumentations with restricted working condition. The range of gripper motion is detected by applied visible light signal of light-emitting diode and photodiode as limit sensors.

1 February 2021 in Measurement and Control
Verified
Journal Article
Open access
PDF file
ASAnan Suebsomran
Anan Suebsomran
Control of assistive exoskeleton robot recently has to be crucial of development and innovation of medical application. To support daily motions for humans, control application of assistive exoskeleton robot allows for limb movement with increased strength and endurance during patient’s wearable exoskeleton robot application. The interaction between such exoskeleton device and the human body at the connecting joint, especially the knees, is the main interest of this design formation. The assistive device requires to design and to develop into innovation design aspect. This research presents the novel design of an active compliant actuation joint in order to increasing the higher torque of actuation than conventional actuation joint. Control design of the higher torque actuation usually difficult priori to conventional torque control. This will contributed to applying the supervisory control for compliant actuation that verified by experiment method. Then the hybrid Radial Basis Function neural network (RBFNN) and PID were proposed for actuating torque control methods. Experimental results show that the design of supervisory control is get better response, and higher producing torque output than the conventional design. Error of torque control of compliant actuation is not instead of ±2 N·m for applying supervisory control, RBFNN with PID controller. Indeed, the low electromagnetic interference (EMI) positioning system using LED and photodiode detector is proposed to be usable in medical application.

23 October 2013 in ISRN Industrial Engineering
Verified
Journal Article
Open access
PDF file
ASAnan Suebsomran
Anan Suebsomran
SBSuthep Butdee
Suthep Butdee
This research aims to achieving the effective cooling parameter on the runout table (ROT) of strip steel in hot rolling process. The 2-dimensional transient heat conduction is developed including the external force convection and heat source due to translational motion. The material property, boundary, and initial condition are defined and bounded to model geometry. The strip velocity, cooling water temperature, and external fluid velocity are chosen for the influent parameters during cooling process at ROT. To find the optimality of cooling operating requirement, simulation study is conducted throughout this research. To reach the objective of optimal cooling consumption at ROT, temperature distribution in the strip steel during cooling governs by the form of heat transfer equation. To solve 2-dimensional transient heat conduction by numerical methods, the backward difference formula (BDF) applies to discretization of partial differentiation equation (PDE). The parallel sparse direct linear solver (PARDISO) and conjugate gradients method are comparatively applied to computation in linear algebraic equation. The simulation studies are divided into 12 case studies with three variations subjected to cooling conditions at ROT. From simulation results, the range of such three variations can be identified in relation to economic cooling system and desired quality of products.


12 January 2026 in Computers
Verified
Journal Article
Open access
PDF file
SPSongpon Pumjam
Songpon Pumjam
SPSarut Panjan
Sarut Panjan
TTTarinee Tonggoed
Tarinee Tonggoed
ASAnan Suebsomran
Anan Suebsomran
Surface electromyography (sEMG) is widely used for decoding motion intent in prosthetic control and rehabilitation, yet the impact of external load on sEMG-to-kinematics mapping remains insufficiently characterized, particularly for wrist flexion-extension This pilot study investigates wrist angle estimation (0–90°) under four discrete counter-torque levels (0, 25, 50, and 75 N·cm) using a multilayer perceptron neural network (MLPNN) regressor with mean absolute value (MAV) features. Multi-channel sEMG was acquired from three healthy participants while performing isotonic wrist extension (clockwise) and flexion (counterclockwise) in a constrained single-degree-of-freedom setup with potentiometer-based ground truth. Signals were filtered and normalized, and MAV features were extracted using a 200 ms sliding window with a 20 ms step. Across all load levels, the within-subject models achieved very high accuracy (R2 = 0.9946–0.9982) with test MSE of 1.23–3.75 deg2; extension yielded lower error than flexion, and the largest error was observed in flexion at 25 N·cm. Because the cohort is small (n = 3), the movement is highly constrained, and subject-independent validation and embedded implementation were not evaluated, these results should be interpreted as a best-case baseline rather than evidence of deployable rehabilitation performance. Future work should test multi-DoF wrist motion, freer movement conditions, richer feature sets, and subject-independent validation.