International audienceThe modeling of in-service behavior is of first importance when reassessing complex structures like harbor structures and when performing risk analysis. To this aim, the monitoring of structures allows assessment of the level of loading and to provide more realistic models for mechanical behavior or input values for their parameters. Moreover, for complex structures and due to building hazards, a stochastic modeling is needed to represent the large scatter of measured quantities. In this article, a step-by-step procedure for structural identification is presented. A decomposition of random variables on Polynomial Chaos is selected and it is shown to represent better the basic variables in comparison to preselected distribution functions, when considering maximum likelihood estimate. The decomposed variables are used for a stochastic analysis to be further updated with available monitoring data. The model can be used to follow the structure behavior during in-service or extreme conditions and to perform a reliability analysis. The proposed procedure will be carried out by using available data from the monitoring of a pile-supported wharf in the Port of Nantes, in France, but it can be generalized to similar monitored structures
27 July 2012 in European Journal of Environmental and Civil Engineering
This article summarises research led during the second phase of the French GEROM (risk management of maritime and river harbour structures) project in order to quantify the risks associated with vulnerable structures. A reliability analysis is applied here to steel sheet-pile seawalls. For this purpose, a stochastic (spatial-temporal) model of steel corrosion is proposed, based on a statistical analysis of data collected from wharves located in several French ports and of various ages. The predictions obtained from the corrosion model are then integrated into a reliability analysis to carry out a time-function reliability analysis of corroded harbour structures. The results are then compared and analysed both in terms of reliability and sensitivity to basic random variables. This approach allows suggesting preliminary requirements about maintenance optimisation.
16 November 2016 in Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards
The uncertainty in terms of soil characterisation is studied to assess its effect on the structural behaviour of extended structures as sheet pile walls. A finite element model is used. This integrates a numerical model of the soil–structure interaction together with a stochastic model that allows characterising the soil variability. The model serves in propagating the variability and the system parameter uncertainties. Discussion is mainly focused on two points: (1) testing the sensitivity of the structural behaviour of a sheet pile wall to different geotechnical parameters and (2) assessing the influence of spatial variability of soil properties on the structural behaviour by identifying the most sensitive geotechnical parameter and the most significant correlation length values. The findings showed that in assessing the sheet pile wall’s structural behaviour, there are spatial variability parameters that cannot be considered negligible. In this study, soil friction angle is found to be an important parameter.
This article presents an accurate survey of two on-piles quays with tie-rods during the building stage and the two first years of their opening. These first years after building are characterized by a very fair exploitation of both quays. The influence of the building conditions on the loads in the tie-rods of the two quays has been identified from measured data. On these two quays, identically designed, an original instrumentation strategy has been achieved: it aims to follow the behavior of the quays during the next 5 years including their building in view to set up models for the prediction of the loadings evolutions and to base the maintenance policy or exploitation during extreme events (storms) on a better understanding of the in-service behavior. This aim has been achieved by monitoring key components of the structure as the tie-rods and by surveying displacements of the quay, tide level, and water level in the embankment. An analysis of all the measurements obtained from 2002 to 2006 has led to identifying probability distributions which represent the randomness of the measured values. The study concludes on the use of these results for assessing structural health.
1 February 2025 in Journal of Pipeline Systems Engineering and Practice