Yan Li

Yan Li

Auto-generated profile, based on publicly available information

Yan Li


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 September 2018 in Materials
Verified
Journal Article
Open access
PDF file
YZYue Zhai
Yue Zhai
YLYubai Li
Yubai Li
YLYan Li
Yan Li
WJWenqi Jiang
Wenqi Jiang
XLXuyang Liu
Xuyang Liu
To provide theoretical basis for fire rescue, post-disaster safety evaluation, and reinforcement of concrete structures, C35 concrete materials are treated with high-temperature heating (200 °C, 400 °C, 600 °C, 800 °C) under two different heating gradients. After natural cooling and water cooling to normal temperature, an impact compression test was carried out at different loading rates using a Split Hopkinson Pressure Bar (SHPB) system with a diameter of 100 mm, and finally the crushed specimens were subjected to a sieving test. The effects of elevated temperatures, cooling methods, heating gradients, and loading rates on the fragment size distribution, fractal characteristics, and energy dissipation of impact-compressed concrete specimens were studied. The results show that with the increase of the loading rate and the rise of the heating temperature, the crushing degree of concrete specimens gradually increases, the average fragment size decreases, and the mass distribution of the fragments move from the coarse end to the fine end. The fragment size distribution of the specimen has obvious fractal characteristics. In addition, its fractal dimension increases with the increase of loading rate and heating temperature, the average size of the specimen fragments decreases correspondingly, and the fracture of the specimen becomes more serious. When the different heating gradients were compared, it was found that the fractal dimension of the specimens subjected to rapid heating treatment was larger than that of the slow heating treatment specimens, and the crushing degree of the specimens with different cooling methods was discrete. By analyzing the energy dissipation of the specimen under different conditions, it is shown that both the fractal dimension and the peak stress increase with the increase of the fragmentation energy dissipation density. It shows that there is a close correlation between the change of fractal dimension and its macroscopic dynamic mechanical properties.

25 August 2015 in Journal of Pressure Vessel Technology
Verified
Journal Article
Closed access
PDF file
QZQian Zhu
Qian Zhu
JZJunhai Zhao
Junhai Zhao
CZChangguang Zhang
Changguang Zhang
YLYan Li
Yan Li
SWSu Wang
Su Wang
The elastic–brittle–plastic unified solutions of limit internal pressure are presented for double-layered combined thick-walled cylinder by the triple-shear unified strength criterion. The unified solutions obtained in this paper are especially versatile that can take into account of material brittle softening and intermediate principal stress quantitatively. The conventional existing elastic-perfectly plastic solutions, based on the Tresca yield criterion, Mises yield criterion, or twin-shear strength theory, can be categorized as special cases of the present unified solutions which can overcome their shortages. Parametric studies were carried out to evaluate the influences of various factors such as brittle softening parameter, strength theory parameter, cohesion, internal friction angle, and intermediate principal stress coefficient on the unified solutions. It is shown that proper choices of failure criterion, material behavior model, and brittle softening are significant in combined cylinder design. The new solutions can be naturally degraded to the existing formula and agree well with the results of the prevailing failure criteria. It is concluded that the unified solutions have an important practical value for the optimum design and engineering application of combined thick-walled cylinder.

15 October 2014 in Journal of Pressure Vessel Technology
Verified
Journal Article
Closed access
PDF file
YLY. Li
Y. Li
JZJunhai Zhao
Junhai Zhao
QZQ. Zhu
Q. Zhu
雪曹雪叶 曹
雪叶 曹
In order to study the mechanical properties of defect-free thin walled elbows (TWE), and evaluate impacts of the intermediate principal stress effect, tension/compression ratio, and strain-hardening of materials into logical consideration, this research, in the framework of finite deformation theory, derived the computational formula of burst pressure for defect-free TWE according to unified strength theory (UST). In addition, influences of various factors on burst pressure were analyzed, which include strength disparity (SD) effect of materials, intermediate principal stress, curvature influence coefficient, strain-hardening exponent, yield to tensile (Y/T) and thickness/radius ratio. The results show that the greater the tension/compression ratio is, the higher the burst pressure is. The influence of the SD effect of materials is more obvious with the increase of elbow curvature and intermediate principal stress. The intermediate principal stress effect can bring the self-bearing capacities and strength potential of materials into a full play, which can achieve certain economic benefits for projects. Moreover, the burst pressure of defect-free TWE increases with the growth of yield ratio and thickness/radius ratio, while decreases with the rise of curvature influence coefficient and strain-hardening exponent. It is also concluded that the Tresca-based and Mohr–Coulomb-based solutions of TWE are the lower bounds of the burst pressure, the twin shear stress (TSS)-based solution is the upper bound of the burst pressure, and the solutions based on the other yield criteria are between the above two. The unified solution in this paper is suitable for all kinds of isotropous materials which have the SD effect and intermediate principal stress effect. As the deduced formula has unified various burst pressure expressions proposed on the basis of different yield criteria for elbows of any curvature (including straight pipelines), and has established the quantitative relationships among them, its applicability is broader. Therefore, the unified solution is of great significance in security design and integrity assessment of defect-free TWE.