Loofah is deemed a promising candidate for the purification of oily fumes. Our research utilized H3PO4 for initial activation of loofah (TCS), producing loofahderived carbon (TGSC-0). Subsequently, Fenton’s reagent was utilized for further modification to yield loofah-derived carbon (TGSC-1). TGSC-1 was used in the form of an adsorption column to simultaneously treat multiple pollutants from oily fumes, with surface Fe3+, Fe2+, and H2O2 catalyzing ·OH and ·OOH generation to enhance adsorption of the oils and non-methane hydrocarbon (NMHC). Characterization showed that the specific surface area of TGSC-1 was 427.97 m2/g and pore sizes ranged from 0.50 to 3.50 nm. The rich mesoporous and macroporous structures of TGSC-1 enhanced the capability of carbon layer adsorption. Langmuir adsorption kinetics suggested that adsorption proceeded via monolayer adsorption pathways, while L-τ lines revealed shorter protective effect times for adsorbing PM10 and PM2.5 than for oils and NMHC. The results indicated that TGSC-1 exhibited maximum saturated adsorption capacities of 25.79, 13.02, 9.82, and 15.99 mg/g for oils, NMHC, PM2.5, and PM10, respectively. Increasing resistance of the adsorption column exhibited a notable synergistic effect of filtration and adsorption in treating oily fumes. It combines renewable materials with low-energy processing, delivering eco-economic benefits for sustainable development and application.
This study investigates the performance of a multi-media bio-scrubbing system that integrates activated sludge with loofah as a biofilm carrier for the purification of complex pollutants from simulated cooking fumes: oils, Non-Methane Hydrocarbons (NMHCs), PM2.5/PM10, and Volatile Organic Compounds (VOCs). Compared to conventional carriers like activated carbon, the biodegradable and low-cost loofah, with its hierarchical porous structure and balanced hydrophilic–lipophilic properties, showed enhanced support for microbial colonization (achieving a biomass density of 105 mg/g) and pollutant adsorption. The system achieved high removal efficiencies in lab-scale tests: 97.4% for total VOCs (including 96.5–100% removal of recalcitrant alkanes and olefins), 91.3% for oils, and >88% for PM2.5/PM10. Mechanistic analysis indicated that the biofilm was dominated by Proteobacteria and Actinomycetes, and the synergistic effect between physical adsorption (via loofah’s porosity) and biodegradation (by microbial consortia) enabled stable performance (maintaining >90% efficiency over a 25-day operation) without observed secondary pollution. The loofah-activated sludge configuration demonstrated improved operational stability and the potential for lower operating costs compared to single-medium systems in this experimental setting. This work explores a promising, eco-friendly approach for treating simulated cooking fumes, utilizing renewable biomass carriers and biological processes, which could contribute to cleaner production strategies.