Iñigo Bilbao

Dr. Iñigo Bilbao


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2021 in Sensors
Verified
Journal Article
Open access
PDF file
LFLorenzo Fanari
Lorenzo Fanari
EIEneko Iradier
Eneko Iradier
Iñigo BilbaoIñigo Bilbao
Iñigo Bilbao
RCRufino Cabrera
Rufino Cabrera
JMJon Montalbán
Jon Montalbán
Pablo AngueiraPablo Angueira
Pablo Angueira
This paper presents improvements in the physical layer reliability of the IEEE 802.11be standard. Most wireless system proposals do not fulfill the stringent requirements of Factory Automation use cases. The harsh propagation features of industrial environments usually require time retransmission techniques to guarantee link reliability. At the same time, retransmissions compromise latency. IEEE 802.11be, the upcoming WLAN standard, is being considered for Factory Automation (FA) communications. 802.11be addresses specifically latency and reliability difficulties, typical in the previous 802.11 standards. This paper evaluates different channel coding techniques potentially applicable in IEEE 802.11be. The methods suggested here are the following: WLAN LDPC, WLAN Convolutional Codes (CC), New Radio (NR) Polar, and Long Term Evolution (LTE)-based Turbo Codes. The tests consider an IEEE 802.11be prototype under the Additive White Gaussian Noise (AWGN) channel and industrial channel models. The results suggest that the best performing codes in factory automation cases are the WLAN LDPCs and New Radio Polar Codes.

19 December 2022 in IEEE Open Journal of the Industrial Electronics Society
Verified
Journal Article
Open access
Iñigo BilbaoIñigo Bilbao
Iñigo Bilbao
LFLorenzo Fanari
Lorenzo Fanari
EIEneko Iradier
Eneko Iradier
Pablo AngueiraPablo Angueira
Pablo Angueira
JMJon Montalbán
Jon Montalbán
Reliable, fast, and deterministic communications are fundamental for future industrial wireless systems. This goal requires multiple cooperating technologies that pertain to different areas of the communication arena. The weight of the waveform and coding technique choices are critical to match industrial use cases' reliability and latency requirements. Specifically, this paper contributes to the field of channel coding in wireless fieldbus links. Classical block coding schemes were designed to maximize information bitrates without stringent latency requirements. Their performance in applications that use short messages degrades significantly. Recently, Sparse Vector Coding (SVC) has been proposed as a coding approach suitable for short packet communications with moderate complexity and low processing latency. This paper presents a comprehensive analysis of sparse vector coding and a reference communications framework for its implementation on a wireless system. A set of simulations is also designed to establish the cross-correlation between the different parameters involved in the code design. As a result, the coding matrix has been identified as a critical parameter that can improve coding performance. In addition, this work includes two new procedures for determining the matrix that could lead to a gain of up to 2dB with respect to the current state of the art.

22 May 2023 in IEEE Transactions on Broadcasting
Verified
Journal Article
Closed access
EIEneko Iradier
Eneko Iradier
Iñigo BilbaoIñigo Bilbao
Iñigo Bilbao
MFMarta Fernandez
Marta Fernandez
JMJon Montalbán
Jon Montalbán
ZHZhihong Hunter Hong
Zhihong Hunter Hong
YWYiyan Wu
Yiyan Wu
Future digital terrestrial television (DTT) systems are introducing revolutionary changes to their architectures and operation modes. One of the best examples is ATSC 3.0, which is pushing to incorporate the Internet Protocol (IP) into the protocol stack. This way, implementing new applications (e.g., target advertisement, connected cars, 4k/8k video content) is closer than ever. Indeed, recent works have suggested designing and implementing an Inter-Tower Communications Network (ITCN) and wireless In-band Distribution Link (IDL) inside the ATSC 3.0 forums. ITCN will interconnect all broadcast towers to form a communication network for control, monitoring, data communication, and localized datacast and broadcast services. Nevertheless, this application has a significant challenge: the self-interference (SI) or loopback signal that is generated and added to the received signal. To reduce the impact of the SI, the transmission centers combine different signal isolation and cancellation techniques. This paper focuses on characterizing the signal power isolation between the transmitted and the received signals under different conditions. In particular, this paper shows the signal isolation values measured during various field trials in real broadcast transmission centers. The results show that the total signal isolation varies depending on the transmission/reception configuration between 70-90 dB. Moreover, due to the measurements, we have demonstrated that the antenna distance is a more relevant parameter for signal isolation than the center frequency. Finally, the possible antenna pattern discrimination has been calculated and discussed.

23 November 2021 in IEEE Transactions on Broadcasting
Verified
Journal Article
Closed access
EIEneko Iradier
Eneko Iradier
AAAritz Abuin
Aritz Abuin
RCRufino Cabrera
Rufino Cabrera
Iñigo BilbaoIñigo Bilbao
Iñigo Bilbao
JMJon Montalbán
Jon Montalbán
SPSung-Ik Park
Sung-Ik Park
A relevant solution for the high demand for new multimedia applications and services is millimeter wave (mmWave) frequency band in 5G. However, in order to face the technological challenges of the present and those that will appear in the short-term future, it is necessary to improve the spectral efficiency of 5G systems. In particular, the Radio Resource Management (RRM) module is considered an essential component. Nevertheless, resource allocation techniques that combine orthogonal multiplexing (OMA) schemes, such as Time Division Multiple Access (TDMA), with Non-Orthogonal Multiple Access (NOMA) techniques have not been studied in-depth. Therefore, this article designs and evaluates different RRM models that combine TDMA with NOMA for innovative applications in the 5G mmWave frequency bands. To this end, the advantages and challenges associated with mmWave frequency bands and potential future applications are introduced. An innovative use case has been designed to test the RRM models. The use case is based on the on-demand distribution of multimedia content in high-density environments, such as museum halls. The on-demand content aims at offering Augmented Reality (AR) services to unicast users in order to provide personalized services. The models have been evaluated in terms of throughput, capacity, and availability. According to the results, the combined RRM techniques offer up to 50% more capacity than the single multiplexing technology models and can provide video-on-demand service to practically the entire cell.

4 November 2022 in IEEE Open Journal of the Industrial Electronics Society
Verified
Journal Article
Open access
LFLorenzo Fanari
Lorenzo Fanari
EIEneko Iradier
Eneko Iradier
Iñigo BilbaoIñigo Bilbao
Iñigo Bilbao
RCRufino Cabrera
Rufino Cabrera
JMJon Montalbán
Jon Montalbán
IVInaki Val
Inaki Val
Industry 4.0 aims to digitize industrial processes entirely, and wireless technologies represent one of the enablers for scalable and flexible communications. However, the current standards and proprietary solutions do not meet the industry's tight requirements in fundamental use cases such as Factory Automation (FA). One of the key research challenges towards replacing wired fieldbuses with wireless links is the design of techniques that enable real-time and deterministic behavior when transmitting short packets. Forward Error Correction (FEC) techniques are critical to this objective, and coding/decoding algorithms must comply with reliability and low latency specifications. This paper surveys existing FEC techniques for short packet transmissions. Compared to other survey papers in the field, we propose several FEC candidate techniques specifically suitable for FA wireless systems. We explore four of these techniques, also examining hardware architecture proposals. The paper proposes a methodology to evaluate their latency and reliability performance. We finally discuss the lessons learned and challenges for future research.

21 June 2024 in IEEE Open Journal of the Communications Society
Verified
Journal Article
Open access
Iñigo BilbaoIñigo Bilbao
Iñigo Bilbao
EIEneko Iradier
Eneko Iradier
JMJon Montalbán
Jon Montalbán
Pablo AngueiraPablo Angueira
Pablo Angueira
NNNhan Thanh Nguyen
Nhan Thanh Nguyen
MJMarkku Juntti
Markku Juntti
In-band full-duplex (IBFD) can double the spectral efficiency of wireless communications systems. However, its major drawback is the self-interference, which interferes with the desired signal at the terminal. Self-interference cancellation can be operated in antenna, analog, and digital domains. In the antenna domain, beamformers are designed to minimize the leaked signal entering the system. This paper proposes an efficient analog beamforming design to maximize the channel achievable rate of massive multiple-input multiple-output (MIMO) IBFD systems. Specifically, we propose a low-complexity deep unfolding technique that provides a significantly better achievable rate than the state-of-the-art to deal with the non-convex design objective and constraints. More concretely, a complexity reduction of 75% is achieved for some scenarios, and of 50% is reached for the rest.