1.6 µm high-order vortex modes carrying orbital angular momentums (OAMs) play significant roles in long-range Doppler lidars and other remote sensing. Amplification of 1.6 µm high-order vortex modes is an important way to provide high-power laser sources for such lidars and also enable the weak echo signal to be amplified so that it can be analyzed. In this work, we propose a four-pass Er:YAG vortex master-oscillator-power-amplification (MOPA) system to amplify 1.6 µm high-order vortex modes. In the proof-of-concept experiments, 1.6 µm single OAM mode (l = 3) is amplified successfully and the gain ranging from 1.88 to 2.36 is achieved. Multiplexed OAM mode (l=±3) is also amplified with favorable results. This work addresses the issue as the low gain of Er:YAG vortex MOPA, which provides a feasible path for 1.6 µm high-order vortex modes amplification.
Airborne wind measurement is of great significance for understanding atmospheric motion and meteorological monitoring. In this paper, we present the development and verification of an airborne Doppler wind lidar (ADWL), featuring an approach proposed to integrate a real-time wind retrieval method with an intelligent processing method for automatic adaptive wind detection. Several verification experiments were conducted to evaluate the measurement effectiveness, including comparisons with a calibrated ground-based Doppler wind lidar (GDWL) and a sounding balloon. Compared with the sounding balloon, the ADWL demonstrated mean errors of 0.53 m/s for horizontal wind velocity and 4.60° for wind direction. The correlation coefficients consistently exceeded 0.98 in all linear analyses. Employed in multiple airborne wind detection events in North China at altitudes up to 6600 m, the ADWL provided effective wind field results with a vertical resolution of 50 m and a data rate of 2 Hz. The wind field results obtained during the detection events validate the ADWL’s capabilities in diverse environments and underscore its potential for the comprehensive detection of meteorological information.
In this paper, a wind retrieval method based on genetic algorithm-particle swarm optimization (GA-PSO) for the coherent Doppler wind lidar (CDWL) is proposed. The algorithm incorporates an advanced optimization framework that considers wind field spatial continuity, simultaneously enhancing retrieval accuracy and computational efficiency. Comprehensive validations of the GA-PSO algorithm are conducted using a 1.5 μm all-fiber CDWL through ground-based and airborne experiments. In ground-based experiments, the GA-PSO algorithm extends the detection range by 20%~30% compared with traditional methods. The validation against meteorological tower data demonstrates excellent agreement, with mean deviations better than 0.27 m/s for horizontal wind speed and 3.07° for horizontal wind direction and corresponding RMSE values better than 0.36 m/s and 6.04°, respectively. During high-altitude airborne experiments at 5.5 km, the GA-PSO algorithm recovers up to 31% more horizontal wind speed and direction information compared with traditional algorithms, demonstrating exceptional performance in low signal-to-noise ratio (SNR) conditions. Both simulation analysis and field experiments demonstrate that the GA-PSO algorithm achieves processing speeds comparable to traditional real-time methods, establishing its suitability for real-time, three-dimensional wind retrieval applications.
We have developed and experimentally investigated a long-range 1.645 µm coherent Doppler wind lidar (CDWL) system. A compact 1.645 µm single-frequency Er:YAG laser is utilized as the laser transmitter. The impact of laser transmitter parameters on wind detection was assessed using the figure of merit (FOM) concept. To enhance the measurement efficiency, the influence of wave aberrations on the heterodyne efficiency was analyzed. A Galilean telescope with an optical aperture of 100 mm is designed as the optical antenna based on the analysis. The line of sight (LOS) detection range exceeds 30.42 km with a data rate of 1 Hz at an elevation angle of 3.5°. To evaluate the effectiveness of the CDWL, comparison experiments were conducted between the 1.645 µm CDWL and a calibrated 1.55 µm CDWL, revealing a correlation coefficient of 0.9816 for the whole detection path in the wind velocity measurement.
With the rapid development of low-altitude UAVs, accurate wind detection is crucial for ensuring flight safety and enabling broader applications. To address this need, this paper introduces a highly integrated CDWL system specifically designed for compact UAV platforms. The system incorporates a self-compensating Harris Hawks Optimization (SC-HHO) retrieval algorithm, which is tailored to the high-dynamic flight environment and stringent payload constraints of UAVs. This algorithm enables real-time wind retrieval with low dependence on external reference data while effectively compensating for platform motion. The performance of the proposed system was validated through the comparative experiment and the UAV-borne experiment. In the comparative experiment, the CDWL showed correlation coefficients above 0.976 in horizontal wind speed and 0.987 in horizontal wind direction relative to a benchmark airborne CDWL system, with corresponding root-mean-square errors better than 0.395 m/s and 4.135°, respectively. During the UAV-borne experiment, the CDWL retrieved platform velocity using the self-compensating mechanism, achieving a standard deviation of 0.080 m/s relative to global navigation satellite system (GNSS) measurements, and successfully acquired wind field information. These results confirm that the developed system provides a viable and practical technical solution for UAV-based remote wind sensing.
The detection capability of pulsed Coherent Doppler Wind Lidars (CDWLs) is limited by low Signal-to-Noise Ratios (SNRs). Therefore, it is critical to develop suitable signal processing algorithms. This paper proposes an enhanced method that integrates Variational Mode Decomposition with Particle Swarm Optimization (VMD-PSO) for wind detection, using the effective detection range as the fitness function. By incorporating wind velocity continuity across range gates, the fitness function enhances the robustness and accuracy of the optimization process, particularly under low-SNR conditions. Simulation results demonstrate that the proposed fitness function improves the ability of the optimized VMD-PSO algorithm to process noisy signals, enhances the stability of extracting effective signals, and ensures wind velocity accuracy. Furthermore, using a developed CDWL system, the algorithm increased the detection range by up to 120.5% under the same pulse accumulation conditions. At the same detection capability, it reduced the required number of pulse accumulations, enhancing the overall performance of the CDWL system.