Aigul Abisheva

Aigul Abisheva

Auto-generated profile, based on publicly available information

Aigul Abisheva


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
STSanat Tolendiuly
Sanat Tolendiuly
JNJaafar Nur-Akasyah
Jaafar Nur-Akasyah
SFSergey Fomenko
Sergey Fomenko
Ahmet TuranAhmet Turan
Ahmet Turan
SASharafhan Assylkhan
Sharafhan Assylkhan
AAAigul Abisheva
Aigul Abisheva
There is a wide variety of superconducting materials, but only a few of them are suitable for practical industrial use, and one of the most promising superconductors is MgB2. Its main advantages are a critical temperature close to 40 K, which allows for operation in a cryogenic environment, low cost of precursors, and the ease of manufacture. In this paper, we attempted to obtain superconducting materials based on magnesium diboride in a new way by using a high-temperature centrifuge and then investigated how centrifugal acceleration could affect the superconducting characteristics of the materials in a greater way during combustion synthesis. As a brief result of this research, it was found that the value of centrifugal acceleration affected the critical current density (Jc = 1.4 A/cm2) of the MgB2 composites, although it did not considerably impact the critical transition temperature of the MgB2 materials (remained at around 37.5–38 K).

21 July 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
GAGulnaz Adilbayeva
Gulnaz Adilbayeva
SASestager Aknazarov
Sestager Aknazarov
OGOlga Golovchenko
Olga Golovchenko
AAAigul Abisheva
Aigul Abisheva
ZAZhanibek Amir
Zhanibek Amir
Aitugan SabitovAitugan Sabitov
Aitugan Sabitov
This study presents a comparative analysis of the effect of the structural-mineralogical type of clay matrices on the phase and structure formation in composite aluminosilicate materials within the multi-component Fe-Al-C-Si system. Highly plastic Saryozek montmorillonite clay and moderately plastic Alekseevskaya kaolinite-illite clay were investigated as binding matrices to consolidate iron-aluminosilicate fly ash from the Almaty CHPP-2. The raw materials and binary batches containing 10 to 50 wt.% fly ash were evaluated using XRD, XRF, TG/DTA, and SEM techniques. The results demonstrate that the superior plastic and binding properties of the Saryozek clay ensure enhanced consolidation of the non-plastic, fragmented ash particles. Simultaneous thermal analysis reveals that increasing the compaction pressure from 20 to 30 MPa induces a kinetic shift in the montmorillonite dehydroxylation interval toward higher temperatures (580 °C –720 °C) due to increased partial water vapor pressure within the dense green body. This thermal shift scientifically necessitates introducing an isothermal dwell at 600°C to mitigate firing defects. The optimal composite properties are achieved at a molding pressure of 30 MPa, a firing temperature of 1050 °C, and a fly ash concentration of 10–20 wt.%, yielding a peak compressive strength of 38.4 MPa. SEM analysis confirmed that under these conditions, the locally formed silicate melt uniformly encapsulates the crystalline mullite and quartz microparticles, whereas increasing the ash content to 50 wt.% results in a loose, highly porous structure that degrades strength down to 17.9 MPa. These findings lay a scientifically substantiated foundation for optimizing composite ceramic synthesis and reducing structural defects.

11 August 2026 in Molecules
Verified
Journal Article
Open access
PDF file
GAGulnaz Adilbayeva
Gulnaz Adilbayeva
SASestager Aknazarov
Sestager Aknazarov
OGOlga Golovchenko
Olga Golovchenko
AAAigul Abisheva
Aigul Abisheva
ZAZhanibek Amir
Zhanibek Amir
Aitugan SabitovAitugan Sabitov
Aitugan Sabitov
This study presents a comparative analysis of the effect of the structural–mineralogical type of clay matrices on the phase and structure formation in composite aluminosilicate materials within the multi-component Fe-Al-C-Si system. Highly plastic Saryozek montmorillonite clay and moderately plastic Alekseevskaya kaolinite–illite clay were investigated as binding matrices to consolidate iron–aluminosilicate fly ash from the Almaty CHPP-2. The raw materials and binary batches containing 10 to 50 wt.% fly ash were evaluated using XRD, XRF, TG/DTA, and SEM techniques. The results demonstrate that the superior plastic and binding properties of the Saryozek clay ensure enhanced consolidation of the non-plastic, fragmented ash particles. Simultaneous thermal analysis reveals that increasing the compaction pressure from 20 to 30 MPa induces a kinetic shift in the montmorillonite dehydroxylation interval toward higher temperatures (580–720 °C) due to increased partial water vapor pressure within the dense green body. This thermal shift scientifically necessitates introducing an isothermal dwell at 600 °C to mitigate firing defects. The optimal composite properties are achieved at a molding pressure of 30 MPa, a firing temperature of 1050 °C, and a fly ash concentration of 10–20 wt.%, yielding a peak compressive strength of 38.4 MPa. SEM confirmed that under these conditions, the locally formed silicate melt uniformly encapsulates the crystalline mullite and quartz microparticles, whereas increasing the ash content to 50 wt.% results in a loose, highly porous structure that degrades strength down to 17.9 MPa. These findings lay a scientifically substantiated foundation for optimizing composite ceramic synthesis and reducing structural defects.