Most of the carbon-based compounds currently manufactured by the chemical industry are derived from petroleum. The rising cost and dwindling supply of oil have been focusing attention on possible routes to making chemicals, fuels, and solvents from biomass instead. In this context, many recent studies have assessed the relative merits of applying different dedicated crops to chemical production. Here, we highlight the opportunities for diverting existing residual biomass—the by-products of present agricultural and food-processing streams—to this end.

Recent research on the additive manufacturing (AM) of Ti alloys has shown that the mechanical properties of the parts are affected by the characteristic microstructure that originates from the AM process. To understand the effect of the microstructure on the tensile properties, selective laser melted (SLM) Ti–6Al–4V samples built in three different orientations were tensile tested. The investigated samples were near fully dense, in two distinct conditions, as-built and stress relieved. It was found that the build orientation affects the tensile properties, and in particular the ductility of the samples. The mechanical anisotropy of the parts was discussed in relation to the crystallographic texture, phase composition and the predominant fracture mechanisms. Fractography and electron backscatter diffraction (EBSD) results indicate that the predominant fracture mechanism is intergranular fracture present along the grain boundaries and thus provide and explain the typical fracture surface features observed in fracture AM Ti–6Al–4V

Three-dimensional lattices have applications across a range of fields including structural lightweighting, impact absorption and biomedicine. In this work, lattices based on triply periodic minimal surfaces were produced by polymer additive manufacturing and examined with a combination of experimental and computational methods. This investigation elucidates their deformation mechanisms and provides numerical parameters crucial in establishing relationships between their geometries and mechanical performance. Three types of lattice were examined, with one, known as the primitive lattice, being found to have a relative elastic modulus over twice as large as those of the other two. The deformation process of the primitive lattice was also considerably different from those of the other two, exhibiting strut stretching and buckling, while the gyroid and diamond lattices deformed in a bending dominated manner. Finite element predictions of the stress distributions in the lattices under compressive loading agreed with experimental observations. These results can be used to create better informed lattice designs for a range of mechanical and biomedical applications