Belarouf Sara

Prof. Dr. Belarouf Sara

Département des Sciences Fondamentales et Appliquées, Institut Agronomique et Vétérinaire Hassan II, Rabat, Rabat-Salé-Kénitra, Morocco
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2021 in Crystals
Verified
Journal Article
Open access
PDF file
ONOumaima Nasry
Oumaima Nasry
ASabderrahim Samaouali
abderrahim Samaouali
BSBelarouf Sara
Belarouf Sara
AMABDELKRIM MOUFAKKIR
ABDELKRIM MOUFAKKIR
HShanane el idrissi sghiouri
hanane el idrissi sghiouri
AHAdil Hafidi-Alaoui
Adil Hafidi-Alaoui
This study aims to provide a thermophysical characterization of a new economical and green mortar. This material is characterized by partially replacing the cement with recycled soda lime glass. The cement was partially substituted (10, 20, 30, 40, 50 and 60% in weight) by glass powder with a water/cement ratio of 0.4. The glass powder and four of the seven samples were analyzed using a scanning electron microscope (SEM). The thermophysical properties, such as thermal conductivity and volumetric specific heat, were experimentally measured in both dry and wet (water saturated) states. These properties were determined as a function of the glass powder percentage by using a CT-Meter at different temperatures (20 °C, 30 °C, 40 °C and 50 °C) in a temperature-controlled box. The results show that the thermophysical parameters decreased linearly when 60% glass powder was added to cement mortar: 37% for thermal conductivity, 18% for volumetric specific heat and 22% for thermal diffusivity. The density of the mortar also decreased by about 11% in dry state and 5% in wet state. The use of waste glass powder as a cement replacement affects the thermophysical properties of cement mortar due to its porosity as compared with the control mortar. The results indicate that thermal conductivity and volumetric specific heat increases with temperature increase and/or the substitution rate decrease. Therefore, the addition of waste glass powder can significantly affect the thermophysical properties of ordinary cement mortar.

25 August 2024 in Buildings
Verified
Journal Article
Open access
PDF file
KAKhadija Annaba
Khadija Annaba
BSBelarouf Sara
Belarouf Sara
FWFatima Zohra El Wardi
Fatima Zohra El Wardi
KIKhalid Ibaaz
Khalid Ibaaz
MCMouha Cherkaoui
Mouha Cherkaoui
YMYassine El Mendili
Yassine El Mendili
The need to construct environmentally friendly buildings to meet current environmental and ecological standards is urgent. This study introduces a new multi-layer construction material with two outer layers of ordinary mortar and an inner layer of a pozzolane-limes composite to meet this need. The thermal efficiency of this material in building construction is investigated using TRNSYS18 simulations for two distinct climatic zones in Morocco, with a particular focus on its impact on heating dynamics. The primary objective is to evaluate the thermal performance of multi-layered pozzolanic materials, for which mortar samples are meticulously prepared as a reference in the two different climatic zones (Azilal and Errachidia). Using the asymmetric hot plate method under both stable and transient conditions, the authors conduct thermal characterization experiments. The results underscore the improvement in thermal performance made possible by the incorporation of pozzolan as an aggregate in the multi-layer material compared to ordinary mortar. Specifically, thermal conductivity improves significantly, from 0.735 W m−1 K−1 for ordinary mortar to 0.4 W m−1 K−1 for multi-layered pozzolanic materials, representing a 46% mass gain. Additionally, effusivity decreases from 730 to 604 J m−2 K−1 s−1/2, while diffusivity decreases from 3.78 to 2.23 × 10−7 m2 s−1, further attesting to the material’s thermal efficacy. TRNSYS18 simulations corroborate the viability of using multi-layered materials as building envelopes, revealing potential annual heating gains of 25% in Azilal and 5% in Errachidia. These findings underscore the promising prospects of integrating these materials into sustainable construction practices.

3 November 2026 in Eng
Verified
Journal Article
Open access
PDF file
BSBelarouf Sara
Belarouf Sara
Saad GheouanySaad Gheouany
Saad Gheouany
Mohamed CHIKHAOUIMohamed CHIKHAOUI
Mohamed CHIKHAOUI
KAKhadija Annaba
Khadija Annaba
FWFatima Zohra El Wardi
Fatima Zohra El Wardi
YMYassine El Mendili
Yassine El Mendili
The increasing demand for food production under water scarcity and climate variability requires intelligent irrigation systems capable of jointly managing water and energy resources. This challenge is particularly relevant in Morocco, where irrigation relies heavily on energy-intensive pumping and where the increasing penetration of photovoltaic generation introduces additional intermittency and operational uncertainty. This study proposes a predictive multi-objective irrigation management framework integrating soil–water dynamics, FAO-56 Penman–Monteith evapotranspiration, precipitation, and renewable-energy availability. A multi-objective particle swarm optimization (MOPSO) strategy is formulated to simultaneously minimize soil-moisture deviation and the combined burden of irrigation-water consumption and CO2 emissions, while satisfying power balance, battery state of charge (SOC) and state of health (SOH), and soil-moisture constraints. The proposed approach is benchmarked against a conventional rule-based controller (RBC) over a four-day horizon under two scenarios: without precipitation and with precipitation. The MOPSO generates a diverse Pareto front, which is subsequently processed through crowding-distance-based diversity preservation, similarity filtering to eliminate redundant solutions, and the extraction of three representative operating profiles—Optimal Irrigation, Environmental, and Balanced—thereby providing decision alternatives without requiring subjective objective weighting. Compared with the RBC, the proposed strategies achieve substantial improvements across both scenarios. Under dry conditions, irrigation-water consumption is reduced by up to 75.52%, total operating cost by 82.45%, CO2 emissions by 67.73%, and mean soil moisture increases by up to 24.72%. When precipitation is available, the benefits are further enhanced for the Environmental and Balanced strategies, with reductions of up to 80.27% in irrigation water, 98.28% in total operating cost, and 75.63% in CO2 emissions, accompanied by an improvement of up to 13.99% in mean soil moisture; the Optimal Irrigation profile, which prioritizes tight soil-moisture tracking, still reduces water use in this scenario but shows a modest 9.7% increase in CO2 emissions relative to the RBC, reflecting its higher irrigation frequency. These results demonstrate that the proposed framework can automatically exploit rainfall availability while coordinating irrigation and renewable-energy resources, without relying on scenario-specific control rules. The stable and diversified Pareto solutions observed across both scenarios further indicate the consistency of the proposed optimization and decision-making strategy under the investigated meteorological variability and renewable-energy intermittency.