Fast permeation and effective solute-solute separation provide the opportunities for sustainable water treatment, but they are hindered by ineffective membranes. We present here the construction of a nanofiltration membrane with fast permeation, high rejection, and precise Cl-/SO42- separation by spatial and temporal control of interfacial polymerization via graphitic carbon nitride (g-C3N4). The g-C3N4 nanosheet binds preferentially with piperazine and tiles the water-hexane interface as revealed by molecular dynamics studies, thus lowering the diffusion rate of PIP by one order of magnitude and restricting its diffusion pathways towards the hexane phase. As a result, membranes with nanoscale ordered hollow structure are created. Transport mechanism across the structure is clarified using computational fluid dynamics simulation. Increased surface area, lower thickness, and a hollow ordered structure are identified as the key contributors to the water permeance of 105 L m2·h−1·bar−1 with a Na2SO4 rejection of 99.4% and a Cl-/SO42- selectivity of 130, which is superior to state-of-the-art NF membranes. Our approach for tuning the membrane microstructure enables the development of ultra-permeability and excellent selectivity for ion-ion separation, water purification, desalination, and organics removal.
Thin-film composite membranes demonstrate tremendous potential for energy-efficient CO 2 capture from power generation, but many technical hurdles are to be overcome before practical, better-performing and cost-effective designs could be realized.
Membranes offer a potentially energy‐efficient and space‐saving solution to reduce CO2 emissions and combat global warming. However, engineering membranes with advanced materials for high permeance and reasonable selectivity is a pressing need. In this context, a series of carbazole‐based conjugated microporous polymer (CMP) membranes are fabricated with thicknesses of a few hundred nanometers through in situ electropolymerization for post‐combustion carbon capture. The findings reveal that various experimental conditions, including the monomer concentration, electric potential, and cyclic voltammetry (CV) cycling number, largely impact the polymerization degree of the carbazole‐based CMP, thus influencing the mode of polymer chain packing. An optimal polymerization degree leads to a larger micropore size and a higher fractional free volume (FFV), thus allowing fast CO2 transport. The study first demonstrates the feasibility of using CMPs to fabricate thin film composite (TFC) membranes for post‐combustion carbon capture and confirms the high controllability of their micropores. These insights provide instructive guidance for the future advancement of CMP applications in membrane fabrication for gas separation and other fields that require precise micropore generation and design.
Covalent organic framework (COF) membranes are promising for eco‐friendly separations, but precise control of pore size at the angstrom level has been challenging, limiting their application in gas separation. This study introduces a pore redistribution method to reduce pore size to the sub‐nanometer range in single‐phase COF membranes. Using a Lewis acid (YbCF3(SO3)3) as the catalyst, interlayer shifting in 2D COFs was observed, which accelerates imine formation and weakens interlayer stacking forces. The pore size was engineered from >1.0 to ~0.6 nm. The optimal membrane achieves a competitive H2 permeance of 2253 gas permeation units (GPUs) and a high H2/CO2 selectivity of 21.6 in a binary equimolar gas test at room temperature, outperforming other one‐phase COF membranes and exceeding the 2008 Robeson upper bound. This approach offers an effective strategy for engineering microporous materials for gas separation and other applications.
Biomimetic ion channels demonstrate potential for nanoscale molecular separations by leveraging their unique confined recognition capabilities. Metal-organic framework (MOF)-based mixed matrix membranes (MMMs) offer a promising platform that integrates the ångström-scale pores of MOFs with polymer processability. However, slow MOF nucleation kinetics and weak interfacial interactions impede precise channel formation. Here, we present a confined molecular encapsulation (CME) strategy that synchronously regulates MOF nucleation kinetics and interfacial interactions, transforming precursors into flexible gel-network metal-organic gels (MOGs) via supramolecular assembly. Molecular dynamics simulations and in-situ optical detection show that stronger MOG-polymer interactions and confined diffusion govern enhanced interfacial compatibility and uniform dispersion. Optimized MMMs deliver a F⁻/Cl⁻ separation ratio of 32.0 with ionic current rectification. COMSOL simulations demonstrate that synergistic coupling of aligned MOF arrays and uniform surface charge enables efficient ion differentiation. This CME strategy establishes a versatile nanoscale platform for fabricating high-performance monovalent ion-selective membranes and nanofluidic devices.