This paper introduces a novel, to the best of our knowledge, method to estimate and compensate the nonlinear gamma factor introduced by the optical system in fringe projection profilometry. We propose to determine this factor indirectly by adjusting the least-squares plane to the estimated phase coming from the reference plane. We only require a minimal set of three fringe sinusoidal images to estimate the gamma factor. This value can be used to rectify computational legacy data and also to generate and project the new set of fringe patterns for which we perform the inverse gamma compensation. Experimental results demonstrate the feasibility of the proposed method to estimate and correct the gamma distortion.
In optical metrology, fringe projection and moire techniques have been widely used to measure the topography of objects. We can combine the advantages of the two techniques by applying a configuration of simultaneous dual projection in the fringe projection technique, which generates a superimposed fringe pattern containing a moire pattern that is phase modulated according to the topography. In this work, we present an analytic and comparative study of three methods to demodulate the phase of the moire pattern: the spatial, spatial-temporal, and temporal methods. Those methods consist of two steps: first, the moire pattern is extracted from the superimposed fringe pattern; next, the phase of the moire pattern is demodulated. The analytical results show that the resulting phase map has double phase sensitivity compared to that of the classical fringe projection technique. Experimental and numeric results prove the feasibility of this technique.
In this work, we propose a novel technique to retrieve 3D shape of dynamic objects by the simultaneous projection of a fringe pattern and a homogeneous white light pattern, both coded in an RGB image. The first one is used to retrieve the phase map by an iterative least-squares method. The second one is used to match object pixels in consecutive images, acquired at various object positions. The proposed method successfully accomplishes the requirement of projecting simultaneously two different patterns. One extracts the object's information while the other retrieves the phase map. Experimental results demonstrate the feasibility of the proposed scheme.
We introduce the frequency transfer function (FTF) formalism for generalized least squares phase-shifting algorithms (GLS-PSAs), whose phase shifts are nonuniformly spaced. The GLS-PSA’s impulsive response is found by computing the Moore–Penrose pseudoinverse. FTF theory allows analyzing these GLS-PSAs spectrally, as well as easily finding figures of merit such as signal-to-noise ratio (SNR) and harmonic rejection capabilities. We show simulations depicting that the SNR slightly decreases as the harmonic rejection robustness improves.
<!-- *** Custom HTML *** --> We propose a fringe-projection profilometry technique for shape defects measurement, which can be employed for three-dimensional (3-D) quality inspection. The proposal consists of using a template surface to design phase-shifting algorithms with special-purpose phase response via the frequency transfer function. These algorithms can jointly and directly estimate the spatial phase deviations in a 3-D inspection. Phase deviations correspond to shape differences between the template shape and a testing one. The phase-unwrapping procedure is unnecessary when phase differences are small, as is usual in quality inspections. Experimental results show that our technique is so sensitive that the ripples in a fingerprint can be retrieved.
In optical metrology synchronous phase-stepping algorithms (PSAs) estimate the measured phase of temporal linear-carrier fringes with respect to a linear-reference. Linear-carrier fringes are normally obtained using closed-loop, feedback, optical phase-stepped devices. On the other hand, open-loop phase-stepping devices usually give fringe patterns with nonlinear phase steps. The Fourier spectrum of linear-carrier fringes is composed of Dirac deltas only. In contrast, nonlinear phase-shifted fringes are wideband, spread-spectrum signals. It is well known that using linear-phase reference PSA to demodulate nonlinear phase stepped fringes, one obtains a spurious-piston. The problem with this spurious-piston is that it may wrongly be interpreted as a real thickness in any absolute phase measurement. Here we mathematically find the origin of this spurious-piston and design nonlinear phase-stepping PSAs to cope with nonlinear phase-stepping interferometric fringes. We give a general theory to tailor nonlinear phase-stepping PSAs to synchronously demodulate nonlinear phase-stepped wideband fringes.