Nopphadon Phusam

Mr. Nopphadon Phusam

University of Phayao, Phayao, Thailand
orcid

Research Focus & Metrics

Representative Publications

View All Publications
30 December 2025 in IEEE Access
Verified
Journal Article
Open access
Thanakarn SuangunThanakarn Suangun
Thanakarn Suangun
CMChatree Mahatthanajatuphat
Chatree Mahatthanajatuphat
Norakamon WongsinNorakamon Wongsin
Norakamon Wongsin
Artitiphong SangthongArtitiphong Sangthong
Artitiphong Sangthong
Nopphadon PhusamNopphadon Phusam
Nopphadon Phusam
PAPrayoot Akkaraekthalin
Prayoot Akkaraekthalin
The article presents the design, optimization, and experimental validation of a compact CPW-fed slot antenna that incorporates an Electromagnetic Band Gap (EBG) reflector utilizing interdigitated planar unit cells for multi-band wireless communication applications. The designed 5×5 unit cell EBG reflector is intended to suppress surface waves, hence improving antenna gain, impedance matching, and radiation directivity throughout critical frequency bands centered around 1.5 GHz, 2.45 GHz, 5 GHz, and 5.5 GHz. Comprehensive parametric analyses refine EBG unit cell size and antenna-to-reflector spacing to guarantee reliable performance on an economical FR4 substrate. The constructed prototype attains uniform gain enhancements of around 7 dBi, with operating frequency ranges recorded at 1.45 – 1.6 GHz, 2.3 – 2.6 GHz, 2.7 – 3 GHz, and 4.5 – 6.5 GHz, encompassing principal 5G, Wi-Fi 6/6E/7, and IoT frequency allocations. Validation measurements performed in both anechoic chambers and a realistic metallic cabin environment verify broadband multi-band capability and operational stability under adverse conditions. The antenna’s compact, low-profile design, along with its interoperability with several standards, positions it as a strong option for upcoming high-density wireless systems that demand high capacity, directivity, and low latency. Nevertheless, its benefits, obstacles, including manufacturing complexity and bandwidth constraints, indicate avenues for future research aimed at further downsizing, bandwidth enhancement, and intelligent gain control techniques. The suggested antenna design illustrates the applicability of metasurface-based EBG reflectors for independent multi-band gain regulation, meeting stringent requirements for advanced aircraft and terrestrial wireless communication environments.

1 October 2026 in Electronics
Verified
Journal Article
Open access
PDF file
Nopphadon PhusamNopphadon Phusam
Nopphadon Phusam
Artitiphong SangthongArtitiphong Sangthong
Artitiphong Sangthong
Thanakarn SuangunThanakarn Suangun
Thanakarn Suangun
BYBuntueng Yana
Buntueng Yana
SPSuriyavut Pra-Ai
Suriyavut Pra-Ai
PAPrayoot Akkaraekthalin
Prayoot Akkaraekthalin
Sub-6 GHz dual-band high-impedance surfaces have been reported as empirical geometries rather than as design rules: no published dual-band cell gives a rule relating geometry to the position of the two artificial-magnetic-conductor resonances, or identifies the parameter that controls their separation. This paper derives an equivalent-circuit model for an asymmetric defected-ground electromagnetic-bandgap unit cell and shows that its dual-band behaviour is governed by an invariant splitting law. The cell is modelled as a series-loaded shunt resonator in which a defected-ground tank couples to the grounding path through the via offset. The model predicts that coupling conserves the product of the two resonance frequencies while increasing their separation, and a continuous via-offset sweep confirms both signatures: the geometric mean f2f3 is constant to 1.0% while the ratio f3/f2 spans 1.23 to 1.46. Hierarchical parameter extraction recovers the uncoupled mode at 5.5916 GHz against 5.5890 GHz measured independently—a 0.05% agreement obtained without constraining it—confirming that splitting is controlled by a single coupling parameter about a fixed geometric centre. A 7.93×7.93 mm2 cell (0.065λ0 at 2.45 GHz) demonstrates the result, backing a dual-slot radiator for simultaneous Wi-Fi 6E/7 and 2.45 GHz operation at a total profile of 17.8 mm (0.145λ0). A control study against a plain conducting reflector isolates the metasurface contribution to ≈1.0 dB at 2.45 GHz.