Zhengwei Du

Zhengwei Du

Auto-generated profile, based on publicly available information

Zhengwei Du


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2024 in Electromagnetic Science
Verified
Journal Article
Closed access
Yan WangYan Wang
Yan Wang
LSLibin Sun
Libin Sun
ZDZhengwei Du
Zhengwei Du
ZZZhijun Zhang
Zhijun Zhang
Due to limited antenna space, high communication requirements, and strict regulatory constraints, the design of antennas for modern mobile phones has become an exceedingly challenging task. In recent years, numerous studies have been conducted in this area, leading to significant advancements. This review paper comprehensively summarizes recent progress made in antenna design for modern mobile phones. Firstly, the challenges faced in antenna design for modern mobile phones are described, including bandwidth enhancement, integration and decoupling techniques, mm-wave array antennas, satellite communication antennas, as well as interactions between mobile antennas and the human body. Secondly, the basic antenna types (such as inverted-F, slot, loop, and planar inverted-F antennas) commonly used in modern metal-bezel mobile phones along with their key characteristics are briefly summarized. Thirdly, the commonly exployed methods used in practical applications for designing wideband antennas within compact sizes and achieving decoupling among multiple antennas with wide bandwidths are collected. Fourthly, recent advances in the design of compact, wideband, and wide-angle scanning mm-wave arrays for modern mobile phones are summarized. Fifthly, recent progress made in satellite communication antenna designs for modern mobile phones, including broadside and end-fire radiation patterns, is presented. Sixthly, recent studies on the interaction between mobile antennas and the human body are briefly concluded. Finally, the future challenge of antenna design for mobile phones is briefly discussed. It is our hope that this comprehensive review will provide readers with a systematic understanding of antenna design principles applicable to modern mobile phones.

21 June 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
DHDaiwei Huang
Daiwei Huang
ZDZhengwei Du
Zhengwei Du
Yan WangYan Wang
Yan Wang
This letter presents a wideband/multi-band quad-antenna system for 4G/5G/GPS metal frame mobile phones. The quad-antenna system has two kinds of antenna elements and four antenna elements. The merit of the proposed antenna system is that a quad-antenna system is achieved under the condition of metal frame and without using any decoupling structure, the desired bands for 4G/5G/GPS are covered. A prototype was fabricated and measured. For the first kind of antenna elements (including two antenna elements), the bands of 698-960MHz, 1710-2690MHz and 3400-3600MHz are covered, the LTE700/GSM850/GSM900/GSM1800/GSM1900/LTE2300/LTE2500/3.5GHz bands all are covered. For the second kind of antenna elements (including two antenna elements), the bands of 1400-2690MHz, and 3400-3600MHz are covered, the GPS, GSM1800/GSM1900/LTE2300/LTE2500/3.5GHz bands are covered. The measured isolations are bigger than 10dB. The measured efficiencies are bigger than 40% at all the working bands. The measured envelope correlation coefficients are very suitable for MIMO communication systems.

15 September 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
BCBo Cheng
Bo Cheng
ZDZhengwei Du
Zhengwei Du
A wideband low-profile eight-element microstrip multiple-input–multiple-output (MIMO) antenna for fifth-generation (5G) mobile phones is proposed. The antenna is designed to be integrated on the back-cover of a mobile phone without occupying its inner space or ground clearance. The elements of the MIMO antenna can simultaneously excite the TM 01 , TM 10 , TM 02 , and TM 11 modes, and their broad operating bands come from combining the four modes together. The proposed MIMO antenna which is a simple single-layer plane structure with a thickness of only 0.787 mm is fabricated and tested. The experimental results show that the −6 dB impedance operating band of the MIMO antenna is 4.4–5.04 GHz which can cover the 5G N79 band of 4.4–5 GHz. It achieves a broad relative bandwidth of 13.6% with a low profile of $0.01~\lambda _{0}$ , where $\lambda _{0}$ is the free-space wavelength of the center frequency. It has an efficiency of higher than 42%, the mutual coupling of lower than −18 dB, the envelope correlation coefficients (ECCs) of lower than 0.24, and the ratios of mean effective gains (MEGs) of lower than 1.96 dB in the operating band.

10 April 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
XTXiaoying Tian
Xiaoying Tian
ZDZhengwei Du
Zhengwei Du
A low-profile wideband shared-radiator four-element multiple-input multiple-output (MIMO) antenna module that can be directly and flexibly integrated with the chassis ground of a mobile terminal is proposed. The module structure of a grounded square shared patch surrounded by four corner-cut patches is constructed through the characteristic mode analysis (CMA). By analyzing the low efficiency problem caused by the reverse currents, the off-diagonal feed positions are proposed to enhance the efficiency. The use of the shared patch with four I-shaped slots and the off-diagonal feeds makes the dimension of the proposed four-element antenna module only 30 mm×30 mm×2 mm. With the help of multiple regionalized characteristic currents and four grounded short branches, the proposed antenna module shows good simulated isolations of better than 12.5 dB in the -6 dB impedance operating band of 4.25–5.13 GHz. To verify the integration flexibility, an 8×8 MIMO antenna prototype with two proposed modules directly deployed on a phone-size chassis ground was fabricated and measured. The experimental results indicate that the -6 dB impedance operating band can cover the 5G N79 band (4.4–5 GHz) with isolations of better than 10 dB and efficiencies of 40.3%-48.5%. The diversity performance, the channel capacity, the effects of the user’s hands and head on the antenna performance, and the specific absorption rate (SAR) are analyzed, and the results are acceptable. With the advantages of zero clearance, small size, wide bandwidth, isolation adjustment flexibility, and integration flexibility, the proposed antenna module is potentially applicable in future mobile terminals.

21 December 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
BCBo Cheng
Bo Cheng
ZDZhengwei Du
Zhengwei Du
A dual polarization microstrip multiple-input-multiple-output (MIMO) antenna for 5G mobile phone applications is proposed in this paper. Eight differentially fed microstrip antenna elements are arranged on the back cover of a mobile phone. Four shorted radiation patches constitute the radiator of an antenna pair, and four antenna pairs form an eight-element MIMO antenna. The antenna element can excite two modes by utilizing the interaction of the two elements of one antenna pair and has a wide operating band. A prototype of the MIMO antenna is fabricated, and eight power dividers are applied to provide the differential feeding. The measured -6 dB impedance operating band is 4.37-5.5 GHz and can cover the N79 band (4.4-5 GHz) for 5G. The measured efficiencies of the antenna elements with the low profile of 1.2 mm are 40%-50% in the N79 band though the substrate has a high loss tangent of 0.02. The measured results show that the MIMO antenna has low mutual couplings of lower than -22 dB, low envelope correlation coefficients (ECCs) of lower than 0.068, and the ratios of mean effective gains (MEGs) of lower than 2.28 dB. Some issues in practical applications are discussed. The proposed antenna provides a promising solution to design a compact and pony-size MIMO antenna without occupying the inner space or ground clearance of a mobile phone.

11 January 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Yan WangYan Wang
Yan Wang
Feng XuFeng Xu
Feng Xu
YJYa-Qiu Jin
Ya-Qiu Jin
ZDZhengwei Du
Zhengwei Du
A reconfigurable 1 bit millimeter-wave array antenna for mobile terminals is investigated. The reconfigurable array antenna consists of four reconfigurable 1 bit microstrip patch antenna elements. Each patch antenna element is fed by a slot on the ground. The 1 bit patch antenna element with phase values of $-\pi $ and 0 is achieved by selecting the feeding direction of microstrip line. After analyzing the performance of the 1 bit four-element array, a fixed phase is applied to mitigate the negative effects of the 1 bit phase quantized error. The 1 bit four-element arrays with and without the fixed phases are compared in detail. The overlapped −10 dB impedance bandwidth of a prototype array at different beam directions reaches 3 GHz (25–28 GHz). Within the frequency range of 26–28 GHz, the array with the fixed phases can steer the main beam from −34° to 35° without grating lobes. Within these steering beams, the performances of good array gain, moderate sidelobe level, and low cross-polarization level are achieved.