A model is introduced for analyzing the influence of tooth shape deviations and assembly errors on the helical gear mesh stiffness, loaded transmission error, tooth contact stress and tooth root stress. The helical gear is approximated as a series of independent spur gear slices along axial direction whose face-width is relatively small. The relative position relationships among those sliced teeth in mesh are developed with tooth profile errors and the stiffness of the sliced tooth is calculated by the potential energy method. From the equilibriums of the forces, gear mesh stiffness, loaded transmission error, tooth contact stress and tooth root stress are calculated. Then two cases are presented for validation of the model. It is demonstrated that the model is effective for calculating the stiffness of helical gear pairs. Finally, the effects of the tooth tip reliefs, lead crown reliefs and misalignments on the gear mesh stiffness, transmission error, tooth contact stress and tooth root stress are analyzed. The results show that mesh stiffness decreases, loaded transmission error, the maximum tooth contact stress and the maximum tooth root stress grow with the increasing tooth tip relief, lead crown relief and misalignment. And tooth edge has concentrated tooth contact stresses with a gear misalignment.
21 November 2013 in Journal of Mechanical Science and Technology
The construction of a digital twin model for the full life cycle of rolling bearings is of great significance for analyzing their degradation performance and health management. However, existing researches primarily concentrate on the degradation of the outer ring of bearings. The cage, as an important component of bearings, lacks extensive research. Therefore, this article proposes a digital twin assisted assessment method for the degradation of bearing cages. First, a dynamic model including bearing cage fracture is established to generate simulation degradation signals. Second, the simulation signal is modified based on the squeeze and excitation cycle generative adversarial network (SECycleGAN) to minimize the characteristic distribution differences between the simulation and real signals. Finally, the corrected high-fidelity signal is used to train the proposed selective kernel transformer (SKformer) model to assess the degradation stage of the bearing cage. This model can simultaneously capture the long-range temporal correlation features and local mutation multiscale features of the input signals, thus improving the model's recognition ability and generalization performance. The effectiveness of the proposed method is demonstrated through signals collected on real and open-source bearing cage degradation test rigs. The results indicate that the proposed method can produce high-fidelity bearing cage degradation signals and achieve better classification accuracy with limited data.