This study proposes a new hybrid wave energy converter composed of a horizontal cylinder and a swing plate to improve the capture width ratio. The horizontal cylinder generates electrical energy by using the potential energy of the incident wave, whereas the swing plate produces electrical energy by using the kinetic energy of the water particles. The converter can improve the capture width ratio of the wave energy by efficiently combining the energies generated by these two different sources. The power-generating performance of the proposed hybrid wave energy converter is evaluated experimentally through a hydraulic model test at a scale ratio of 0.3 in a two-dimensional wave tank using direct conversion by a dynamo PTO (Power Take-Off) system. The dynamic power-generation characteristics of the hybrid wave energy converter are analyzed with respect to the eventual regularity of the incident wave (regular and irregular wave conditions), and the data necessary for the design of the generator and control system are acquired.
In this paper, for the case of “service life extension” with the same capacity for wind turbines, a structural safety evaluation was carried out to determine whether to extend the service life of the aged foundation. As a result of this study, it was found that the aged foundation satisfies the structural safety of material strength, ultimate strength, fatigue life, and serviceability up to the present. Although the in-service period has been over 16 years, it has been shown that the material properties of concrete have exceeded the design strength, and no significant material deterioration has occurred. Also, structural safety could be evaluated more realistically based on actual concrete properties. In particular, it has been shown that it has a fatigue life of 40 years or more, so service life can be extended. It is expected that the methodology used in this paper will be useful not only for structural safety evaluation of the foundation in service, but also for decision-making for extending the service life. Furthermore, a more technical approach should be explored by many researchers in the future.
This paper presents the results of wave force tests conducted on three types of offshore support structures considering eight waves and three sea levels to investigate the corresponding wave forces. As a result of this study, it is found that the occurrence of shoaling in shallow water induces a significant increase of the wave force. Most of the test models at the shallow water undergo a nonlinear increase of the wave force with higher wave height increasing. In addition, the larger the diameter of the support structure within the range of this study, the larger the diffraction effect is, and the increase in wave force due to shoaling is suppressed. Under an irregular wave at the shallow water, the wave force to the long-period wave tends to be slightly higher than that of the short period wave since the higher wave height component included in the irregular wave has an influence on the shoaling. In addition, it is found that the influence of shoaling under irregular wave becomes more apparent in the long period.
1 January 2017 in International Journal of Engineering and Technology
The design and the construction are carried out by installation of new caissons on the back or the front of old caissons to increase the stability of old caisson breakwater. In this study, we use the eigenfunction expansion method to analyze the effects of wave structure interaction when new circular caissons are installed on the back or the front of old caissons. The comparison of numerical results between present method and Williams and Li is made, and the wave force and the wave run-up acting on each circular caisson are calculated for various parameters by considering the wave structure interaction.
31 December 2019 in Journal of Korean Society of Coastal and Ocean Engineers
In order to increse the stability of old caissons, the design and the construction are performed by installation of new caissons on the back of or on the front of old caissons. In this study, we use the eigenfunction expasnion method to analyze the characteristics of wave forces when new circular caissons are installed on the back of old caissons. The comparison of numerical results between eigenfunction expansion method and ANSYS AQWA is made and the wave force acting on each circular caisson is calculated by considering the wave-structure interaction effect.