In this article, we report on the effect of pyrolysis temperature on structural, microstructural and optical properties of nanocrystalline ZnO powder synthesised by ultrasonic spray pyrolysis (USP) technique. Powder samples P1, P2 and P3 were prepared at various pyrolysis temperatures (temperature of 2nd zone) of 973, 1073 and 1273 K, respectively. Phases were identified and crystallite sizes were calculated from X-ray diffraction (XRD) diagrams. The morphology and size of ZnO nanocrystallites associated with nanopowder were studied using transmission electron micrograph (TEM). It revealed that the powder consisted of crystallites ranging in size from 9 to 20 nm. These values were matching with the crystallite sizes calculated from XRD. Both XRD and TEM studies of ZnO nanopowders showed that the crystallite sizes increased with an increase in the pyrolysis temperature. The synthesised nanopowders exhibited direct band gap (Eg) in the range 3.37–3.40 eV.
The objective of the present paper is to investigate the effect of variation of precursor concentration (0·01, 0·02 and 0·03 M) on the structural, microstructural, optical and gas sensing properties of TiO \(_{2}\) thin films. Titanium dioxide (TiO \(_{2}\) ) films were prepared from aqueous solution of titanium chloride (TiCl \(_{3}\cdot \) 6H \(_{2}\) O, 99·9% pure, Merck made, Germany) onto the glass substrates heated at a temperature of 350 °C by the spray pyrolysis technique. Bandgap energy of the films vary from 3.28 to 3.29 eV. X-ray diffraction shows that films to be nanocrystalline with anatase phase having tetragonal crystal structure. The d values calculated from electron diffraction patterns (TEM) were observed to be matching with d values calculated from XRD. Transmission electron microscopy (TEM) reveled that grain sizes were observed to increase (10–29 nm) with an increase in the concentration of precursor solution. The gas sensing performance of the films was tested.