India, the second largest agro-based economy with year-round crop cultivation, generates a large amount of agricultural waste, including crop residues. In the absence of adequate sustainable management practices, approximately 92 seems a very small number of metric tons of crop waste is burned every year in India, causing excessive particulate matter emissions and air pollution. Crop residue burning has become a major environmental problem causing health issues as well as contributing to global warming. Composting, biochar production and mechanization are a few effective sustainable techniques that can help to curtail the issue while retaining the nutrients present in the crop residue in the soil. The government of India has attempted to curtail this problem, through numerous measures and campaigns designed to promote sustainable management methods such as converting crop residue into energy. However, the alarming rise of air pollution levels caused by crop residue burning in the city of Delhi and other northern areas in India observed in recent years, especially in and after the year of 2015, suggest that the issues is not yet under control. The solution to crop residue burning lies in the effective implementation of sustainable management practices with Government interventions and policies. This manuscript addresses the underlying technical as well as policy issues that has prevented India from achieving a long-lasting solution and also potential solutions that have been overlooked. However, effective implementation of these techniques also requires us to look at other socioeconomic aspects that had not been considered. This manuscript also discusses some of the policy considerations and functionality based on the analyses and current practices. The agricultural waste sector can benefit immensely from some of the examples from other waste sectors such as the municipal solid waste (MSW) and wastewater management where collection, segregation, recycling and disposal are institutionalized to secure an operational system. Active stakeholder involvement including education and empowerment of farmers along with technical solutions and product manufacturing can also assist tremendously. Even though the issue of crop residue burning touches many sectors, such as environment, agriculture, economy, social aspects, education, and energy, the past governmental efforts mainly revolved around agriculture and energy. This sectorial thinking is another barrier that needs to be broken. The government of India as well as governments of other developing countries can benefit from the emerging concept of nexus thinking in managing environmental resources. Nexus thinking promotes a higher-level integration and higher level of stakeholder involvement that goes beyond the disciplinary boundaries, providing a supporting platform to solve issues such as crop residue burning.

Anaerobic digestion is a technology that has been used by humans for centuries. Anaerobic digestion is considered to be a useful tool that can generate renewable energy and significant research interest has arisen recently. The underlying theory of anaerobic digestion has been established for decades; however, a great deal of current research is directed towards the optimization of anaerobic digestion under diverse digestion conditions. This review provides a summary of the processes underlying anaerobic digestion, commonly-utilized measurements of anaerobic sludge, operating parameters of anaerobic digesters, and methods of acceleration and optimization used to improve process efficiency. Recent developments in addition to older research are considered to provide a general but comprehensive summary of accumulated knowledge in the theory of anaerobic digestion, as well as considerations in the efficient operation of digesters. We have determined that the numerous factors pertinent to the design and operation of batch-based anaerobic digesters must each be considered to ensure the maximum efficiency and cost-effectiveness of a digester provided its respective operating conditions.

With stable existence in liquids for over several weeks, nanobubbles have an extensive range of applications across many fields of science and engineering. For an effective and functional use of these bubbles, it is important to know the reason for their long-term stability. Therefore, a comprehensive laboratory investigation was performed to determine bubble size distributions and zeta potentials of nanobubbles, first with four different gases (test series I), then with different salt concentrations, pH levels, and temperatures of the solution (test series II). Experimental results from test series I showed that the average bubble size depended on the gas solubility in water, and zeta potential depended on the ability of the gas to generate OH ⁻ ions at the water/gas interface. Experimental results from test series II showed that bubbles with high negative zeta potentials can be generated in solutions of high pH, low temperatures, and low salt concentrations. The high pH solutions produced smaller but stable nanobubbles. Bubble diameter slightly increased with increasing salt concentration. However, bubble size did not show considerable dependence on solution temperature. Long-term tests showed that with time zeta potential of bubbles decreased while the bubble size increased. Even though bubble sizes are expected to decrease with time due to gas diffusion, results indicate increased bubble sizes. This is because of decrease in zeta potential and bubble movement due to Brownian motion which causes bubble coalescence over time to form larger bubbles.

Per- and polyfluoroalkyl substances (PFAS) are pollutants that have demonstrated a high level of environmental persistence and are very difficult to remediate. As the body of literature on their environmental effects has increased, so has regulatory and research scrutiny. The widespread usage of PFAS in industrial applications and consumer products, complicated by their environmental release, mobility, fate, and transport, have resulted in multiple exposure routes for humans. Furthermore, low screening levels and stringent regulatory standards that vary by state introduce considerable uncertainty and potential costs in the environmental management of PFAS. The recalcitrant nature of PFAS render their removal difficult, but existing and emerging technologies can be leveraged to destroy or sequester PFAS in a variety of environmental matrices. Additionally, new research on PFAS remediation technologies has emerged to address the efficiency, costs, and other shortcomings of existing remediation methods. Further research on the impact of field parameters such as secondary water quality effects, the presence of co-contaminants and emerging PFAS, reaction mechanisms, defluorination yields, and the decomposition products of treatment technologies is needed to fully evaluate these emerging technologies, and industry attention should focus on treatment train approaches to improve efficiency and reduce the cost of treatment.

Per- and polyfluoroalkyl substances (PFASs) are a family of highly toxic emerging contaminants that have caught the attention of both the public and private sectors due to their adverse health impacts on society. The scientific community has been laboriously working on two fronts: (1) adapting already existing and effective technologies in destroying organic contaminants for PFAS remediation and (2) developing new technologies to remediate PFAS. A common characteristic in both areas is the separation/removal of PFASs from other contaminants or media, followed by destruction. The widely adopted separation technologies can remove PFASs from being in contact with humans; however, they remain in the environment and continue to pose health risks. On the other hand, the destructive technologies discussed here can effectively destroy PFAS compounds and fully address society’s urgent need to remediate this harmful family of chemical compounds. This review reports and compare widely accepted as well as emerging PFAS destruction technologies. Some of the technologies presented in this review are still under development at the lab scale, while others have already been tested in the field.