MINGHSIEN HSUEH

Prof. Dr. MINGHSIEN HSUEH

National Kaohsiung University of Science and Technology/Department of Industrial Engineering and Management
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MINGHSIEN HSUEHMINGHSIEN HSUEH
MINGHSIEN HSUEH
CLChao-Jung Lai
Chao-Jung Lai
SWShi-Hao Wang
Shi-Hao Wang
YZYu-Shan Zeng
Yu-Shan Zeng
TCTao-Hsing Chen
Tao-Hsing Chen
WHWen- Chen Huang
Wen- Chen Huang
Fused Deposition Modeling (FDM) can be used to manufacture any complex geometry and internal structures, and it has been widely applied in many industries, such as the biomedical, manufacturing, aerospace, automobile, industrial, and building industries. The purpose of this research is to characterize the polylactic acid (PLA) and polyethylene terephthalate glycol (PETG) materials of FDM under four loading conditions (tension, compression, bending, and thermal deformation), in order to obtain data regarding different printing temperatures and speeds. The results indicated that PLA and PETG materials exhibit an obvious tensile and compression asymmetry. It was observed that the mechanical properties (tension, compression, and bending) of PLA and PETG are increased at higher printing temperatures, and that the effect of speed on PLA and PETG shows different results. In addition, the mechanical properties of PLA are greater than those of PETG, but the thermal deformation is the opposite. The above results will be a great help for researchers who are working with polymers and FDM technology to achieve sustainability.

20 July 2021 in Polymers
Verified
Journal Article
Open access
MINGHSIEN HSUEHMINGHSIEN HSUEH
MINGHSIEN HSUEH
CLChao-Jung Lai
Chao-Jung Lai
CCCheng-Feng Chung
Cheng-Feng Chung
SWShi-Hao Wang
Shi-Hao Wang
WHWen- Chen Huang
Wen- Chen Huang
TCTao-Hsing Chen
Tao-Hsing Chen
In order to optimize the efficiency of the Fused deposition modeling (FDM) process, this study used polylactic acid (PLA) material under different parameters (the printing angle and the raster angle) to fabricate specimens and to explore its tensile properties. The effect of the ultraviolet (UV) curing process on PLA materials was also investigated. The results showed that the printing and raster angles have a high impact on the tensile properties of PLA materials. The UV curing process enhanced the brittleness and reduced the elongation of PLA material. Different effects were observed on tensile strength and modulus of specimens printed with different parameters after UV curing. The above results will be a great help for researchers who are working to achieve sustainability of PLA materials and FDM technology.

29 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MINGHSIEN HSUEHMINGHSIEN HSUEH
MINGHSIEN HSUEH
CLChao-Jung Lai
Chao-Jung Lai
KLKuan-Yin Liu
Kuan-Yin Liu
CCCheng-Feng Chung
Cheng-Feng Chung
SWShi-Hao Wang
Shi-Hao Wang
YZYu-Shan Zeng
Yu-Shan Zeng
Additive manufacturing (AM) has the advantages of providing materials with lightweight microporous structures and customized features, and being environmentally safe. It is widely used in medical sciences, the aerospace industry, biological research, engineering applications, and other fields. Among the many additive manufacturing methods, fused deposition modeling (FDM) is relatively low-cost, wastes less raw material and has a lower technical threshold. This paper presents a study on 3D printing based on FDM by changing two printing parameters, namely the printing temperature and filling percentage. The produced polylactic acid (PLA) material was analyzed through tensile and Shore D hardness tests and the differences in mechanical properties before and after the UV curing process were analyzed. The results show that increasing the filling percentage or increasing the printing temperature can effectively improve the tensile Young’s modulus, ultimate tensile strength, elongation, and Shore hardness of the material. The UV curing process could enhance the rigidity and hardness of the material significantly but reduced the strength and toughness of the material. These findings could benefit researchers studying FDM with the goal of achieving sustainable manufactured materials.

25 April 2019 in Symmetry
Verified
Journal Article
Open access
PDF file
CWC.N. Wang
C.N. Wang
MINGHSIEN HSUEHMINGHSIEN HSUEH
MINGHSIEN HSUEH
DLDa Fu Lin
Da Fu Lin
Fuel and energy are basic resources necessary to meet a country’s socioeconomic development needs; further, countries rich in these resources have the best premise for meeting the inputs of an economic system; however, this also poses many political challenges and threats to national security. Vietnam is located in the Southeast Asian monsoon-humid tropical region and has diverse fuel-energy resources such as coal, petroleum, and hydropower, along with renewable energy sources such as solar energy, biomass energy, and geothermal energy. However, the reality of economic development in recent years shows complex fluctuations in fuel and energy usage, i.e., besides the export of coal and crude oil, Vietnam still has imported processed oil products. To overcome this issue, many hydrogen power plants will be built in the future. This is why we propose fuzzy multicriteria decision-making (FMCDM) for hydrogen power plant site selection in this research. All criteria affecting location selection are determined by experts and literature reviews, and the weight of all criteria are defined by a fuzzy analytic hierarchy process (FAHP). The technique for order of preference by similarity to an ideal solution (TOPSIS) is a multicriteria decision analysis method, which is used for ranking potential locations in the final stage. As a result, the decision-making unit, DMU010 (DMU010), has become the optimal solution for building hydrogen power plants in Vietnam. A multicriteria decision-making (MCDM) model for hydrogen power plant site selection in Vietnam under fuzzy environment conditions is a contribution of this study. This research also provides useful tools for other types of renewable energies in Vietnam and other countries.

8 July 2022 in Polymers
Verified
Journal Article
Open access
PDF file
YZYu-Shan Zeng
Yu-Shan Zeng
MINGHSIEN HSUEHMINGHSIEN HSUEH
MINGHSIEN HSUEH
CLChao-Jung Lai
Chao-Jung Lai
THTe-Ching Hsiao
Te-Ching Hsiao
CPChieh-Yu Pan
Chieh-Yu Pan
SWShi-Hao Wang
Shi-Hao Wang
This paper investigated the hardness property of the fused deposition modeling (FDM)-printed PLA samples via different process parameters of printing and raster angles. The hardness data were sampled from the flat and edge surfaces of the samples. In addition, the effect of hardness characters after the ultraviolet (UV) curing process was analyzed. Furthermore, this research found that the printing and raster angles significantly affected the hardness value of the PLA part, which slightly increased after the UV irradiation. Moreover, the results of this study will provide a reference for the field of FDM application.

1 February 2023 in Materials Research Express
Verified
Journal Article
Open access
YZYu-Shan Zeng
Yu-Shan Zeng
MINGHSIEN HSUEHMINGHSIEN HSUEH
MINGHSIEN HSUEH
THTe-Ching Hsiao
Te-Ching Hsiao
Three-dimensional (3D) printing technology has developed rapidly in the past few years. This technology is widely used in houses, workpieces, artworks, organs, and even the food industry. Among the multiple 3D printing methods, the stereolithography appearance (SLA) technique is well known for its high printing speed and considerable accuracy. In this research, the optimization parameters of the laser curing technology were applied by changing laser power and molding thickness. The mechanical properties were tested using a tensile test and a compression test of photosensitive resin materials after ultraviolet (UV) curing. The experimental results revealed that increasing the laser power or reducing the molding thickness increased the ultimate tensile strength, tensile Young’s modulus, and compressive strength of the material. However, when the stretch was decreased after UV curing, the strength of the material effectively improved, but the toughness of the material decreased. The abovementioned experimental results will be helpful to researchers for further studies on SLA.