This paper proposes a new controller for an underactuated quad-rotor family of small-scale unmanned aerial vehicles (UAVs) using output feedback (OFB). Specifically, an observer is designed to estimate the velocities and an output feedback controller is designed for a nonlinear UAV system in which only position and angles are measurable. The design is performed via a Lyapunov type analysis. A semi- global uniformly ultimate bounded (SGUUB) tracking result is achieved. Simulation results are shown to demonstrate the proposed approach.
A quad-rotor unmanned aerial vehicle (UAV) and a two-degree-of-freedom (DOF) camera unit are combined to achieve a fully-actuated fly-by-camera positioning system. The flight control interface allows the user to command motions in the camera frame of reference - a natural perspective for surveillance and inspection tasks. A nonlinear velocity controller, derived using Lyapunov stability arguments, produces simultaneous complementary motion of the quad-rotor vehicle and the camera positioning unit. The controller achieves globally uniform ultimate boundedness (GUUB) on all velocity error terms.
In this paper, adaptive tracking control of an underactuated quadrotor is addressed. Position and yaw trajectory tracking is designed using state feedback control system and an integrator backstepping approach is applied to this coupled and cascaded dynamic system. The control design is further complicated by considering the parametric uncertainty of the dynamic modeling of the quadrotor aerial-robot vehicle. Projection-based adaptive control schemes are then designed to estimate the unknown parameters. Lyapunov-type stability analysis and numerical simulation results which yields a bounded tracking result are shown to demonstrate the initial validity of the proposed controllers.
This paper proposes a new controller for an underactuated quad-rotor family of small-scale unmanned aerial vehicles (UAVs) using output feedback (OFB). Specifically, an observer is designed to estimate the velocities and an output feedback controller is designed for a nonlinear UAV system in which only position and angles are measurable. The design is performed via a Lyapunov type analysis. A semi-global uniformly ultimate bounded (SGUUB) tracking result is achieved. Simulation results are shown to demonstrate the proposed approach.
An innovative type of mobile manipulator, designated Manipulator on VTOL (Vertical Take-Off and Landing) Aircraft (MOVA), is proposed as a potential candidate for autonomous execution of field work in less-structured environments. A planar MOVA system design is presented as the first step toward a fully functioning 3D system. The design has the minimum number of joints for the end-effector to achieve trajectory tracking. Dynamics equations of this planar MOVA system are derived using the Euler-Lagrangian approach and then transformed into decoupled translational and rotational dynamics using the virtual manipulator method. The backstepping technique is adopted for controller design due to the underactuated translational dynamics and a feedback linearization controller is used to control the onboard manipulator dynamics. A stability analysis is performed on the unified controller with GUUB tracking performance proven.