Saif S. Irhayyim

Prof. Saif S. Irhayyim

Tikrit University, Salah Al-Deen, Iraq
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in AIMS Materials Science
Verified
Journal Article
Open access
PDF file
SISaif S. Irhayyim
Saif S. Irhayyim
HHHashim Sh. Hammood
Hashim Sh. Hammood
HAHassan Abdulhadi
Hassan Abdulhadi
In this study, a brief review of the effects of the various types of TiO2 nanoparticles and a fixed addition of CNTs to the aluminum matrix on the mechanical, microstructural, and wear characteristics of the resulting composites. Classical powder metallurgy technique was utilized to fabricate the hybrid nanocomposites in this study, while the hybrid nanocomposites were characterized using SEM and XRD. The mechanical properties of the hybrid nanocomposites were evaluated by testing their microhardness, wear tests, and diametral compressive strength. From the SEM and XRD analysis, there was a proper and homogenous distribution of the reinforced particles. Although there was some agglomeration, no intermetallic compounds were found. The study also revealed that the microhardness, diametral compressive strength, and wear resistance significantly improved when the TiO2 nanoparticle content was increased. Also, it was explained that the wear resistance negatively correlated with the applied loads.

1 January 2020 in AIMS Materials Science
Verified
Journal Article
Open access
PDF file
SISaif S. Irhayyim
Saif S. Irhayyim
HHHashim Sh. Hammood
Hashim Sh. Hammood
AMAnmar D. Mahdi
Anmar D. Mahdi
In the present study, aluminum–5 wt% graphite self-lubricating composites with 0, 1.5, 2.5, 3.5, and 4.5 wt% of MgO nanoparticles were prepared by utilizing powder metallurgy route to achieve high mechanical and wear properties. The hybrid composites were characterized by using a scanning electron microscope (SEM) and X-ray Diffractometer (XRD). The dry sliding wear test was performed under various loads of 5, 10, 15 and 20 N at a constant sliding distance of 1810 m. It was found that increasing nano–MgO content results in a decrease in density and an increase in porosity. By increasing the weight fraction of MgO nanoparticles improved both the micro-hardness and diametral compressive strength, until an optimum value up to 2.5 wt% and then, the severe reduction was observed. The wear rate reduced with improving the amount of nano–MgO particles up to 2.5 wt% then increased for all applied loads and also the wear rate is still lower when the MgO content is 1.5 and 3.5 wt% compared with that without MgO nanoparticles. Additionally, the wear rate for all hybrid composites positively correlated with the applied loads. Lastly, the results revealed that the hybrid composites with 2.5 wt% MgO nanoparticles showed better mechanical and wear properties.

28 August 2019 in Materials Research Express
Verified
Journal Article
Closed access
SISaif S. Irhayyim
Saif S. Irhayyim
SASaad R Ahmed
Saad R Ahmed
AAAbdulkader A Annaz
Abdulkader A Annaz

12 December 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
AAA R Ahmed
A R Ahmed
SISaif S. Irhayyim
Saif S. Irhayyim
HHH S Hammood
H S Hammood

19 August 2019 in Periodicals of Engineering and Natural Sciences (PEN)
Verified
Journal Article
Open access
PDF file
HHHashim Sh. Hammood
Hashim Sh. Hammood
AMAmjed S. Mahmood
Amjed S. Mahmood
SISaif S. Irhayyim
Saif S. Irhayyim
Effect of Graphite Particles on Physical and Mechanical Properties of Nickel Matrix Composite

30 September 2017 in Tikrit Journal of Engineering Sciences
Verified
Journal Article
Closed access
PDF file
FMFarouk M. Mahdi
Farouk M. Mahdi
RRRaed N. Razooqi
Raed N. Razooqi
SISaif S. Irhayyim
Saif S. Irhayyim
The Influence of Graphite Content and Milling Time on Hardness, Compressive Strength and Wear Volume of Copper - Graphite Composites Prepared Via Powder Metallurgy