Kamel Sultan

Dr. Kamel Sultan

EECS, The University of Queensland, Brisbane, Queensland, Australia
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2022 in Electronics
Verified
Journal Article
Open access
PDF file
Muhammad IkramMuhammad Ikram
Muhammad Ikram
KSKamel Sultan
Kamel Sultan
MLMuhammad Faisal Lateef
Muhammad Faisal Lateef
Abdulrahman AlqadamiAbdulrahman Alqadami
Abdulrahman Alqadami
Next-generation communication systems and wearable technologies aim to achieve high data rates, low energy consumption, and massive connections because of the extensive increase in the number of Internet-of-Things (IoT) and wearable devices. These devices will be employed for many services such as cellular, environment monitoring, telemedicine, biomedical, and smart traffic, etc. Therefore, it is challenging for the current communication devices to accommodate such a high number of services. This article summarizes the motivation and potential of the 6G communication system and discusses its key features. Afterward, the current state-of-the-art of 5G antenna technology, which includes existing 5G antennas and arrays and 5G wearable antennas, are summarized. The article also described the useful methods and techniques of exiting antenna design works that could mitigate the challenges and concerns of the emerging 5G and 6G applications. The key features and requirements of the wearable antennas for next-generation technology are also presented at the end of the paper.

4 April 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
KSKamel Sultan
Kamel Sultan
Muhammad IkramMuhammad Ikram
Muhammad Ikram
NNNghia Nguyen-Trong
Nghia Nguyen-Trong
This letter first presents a concept of a dual-band antenna with a very large frequency ratio, which can be suitable for integrated 4G/millimeter (mm)-wave fifth-generation (5G) and beyond 5G applications for Internet of Things devices. The antenna is based on a tapered slot, which simultaneously works as a resonant open-ended slot at low frequency and a high-gain Vivaldi antenna at high frequency. The impedance bandwidth is improved by modifying the slot shape, i.e., creating multisections within the slot. Based on this approach, a multibeam antenna (gain of 10 dBi) at an mm-wave frequency which also covers multibands at lower frequency extending from 2.5 to 6 GHz is designed. The design is validated numerically and experimentally in terms of return loss, radiation efficiency, gain, total scan pattern, and coverage efficiency.

1 January 2019 in Progress in Electromagnetics Research C
Verified
Journal Article
Closed access
KSKamel Salah Sultan
Kamel Salah Sultan
HAhaythem Abdullah
haythem Abdullah

5 May 2022 in IEEE Access
Verified
Journal Article
Open access
Muhammad IkramMuhammad Ikram
Muhammad Ikram
KSKamel S. Sultan
Kamel S. Sultan
AAAmin Abbosh
Amin Abbosh
NNNghia Nguyen-Trong
Nghia Nguyen-Trong
A multi-beam and multi-polarized Multiple-Input Multiple-Output (MIMO) antenna system, which operates at Sub-6 GHz and mm-wave frequency bands is realized for 5G Vehicle-to-Everything (5G-V2X) application. Since the vehicle needs to communicate in different scenarios with the others, e.g. vehicles, passengers, control units, and mobile networks, in the surrounding area, an antenna with 360° coverage area is required. In this paper, an eight-element MIMO antenna is designed and implemented for this purpose. Four elements are distributed evenly in a circular substrate placed in the azimuth plane. Meanwhile, the other four elements are printed on two orthogonal substrates which are fixed perpendicularly to the circular substrate. Each radiating component is a tapered slot antenna integrated with a dipole to operate at both microwave and mm-wave bands. The simulated and measured results demonstrate capability of the proposed design in covering the whole surrounding area (360° coverage in azimuth plane). The antenna achieves a realized gain of more than 9 dBi at the mm-wave range and 4 dBi at the microwave range.

5 September 2013 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
KSK. S. Sultan
K. S. Sultan
HAhaythem Abdullah
haythem Abdullah
EAE. A. Abdallah
E. A. Abdallah
EHE. A. Hashish
E. A. Hashish
Recently, the mobile handsets support both the mobile and wireless LAN services. Thus, our target is to introduce a new antenna that supports both services. The antenna operates for most of the mobile applications such as the GSM 850, GSM 900, DCS 1800, PCS 1900, UMTS 2100, and most of the LTE bands, especially the low-frequency LTE 700 band. The antenna also supports the WiMAX, wireless local area network (WLAN), and the Industrial, Scientific, and Medical (ISM) bands. The antenna not only has a compact size, but also it supports a low specific absorption rate (SAR) radiation at all the operating frequencies. It consists of a monopole, a meander line, and an electromagnetic band-gap (EBG) structure. In order to cover the low frequency bands, a meander line is utilized due to its compact size, but unfortunately it is a narrowband antenna that is difficult to cover both LTE700 and GSM 900 bands. The solution stems from the use of an EBG structure that widens the band to cover the two low frequency bands and to reduce the maximum SAR. The higher frequency bands are supported by both the monopole and the meander line since they acts as traveling-wave antennas at the high frequency bands. The antenna meets three challenging parameters: the compact size, the multiband operation including the low frequency bands, and the low SAR radiation. Good agreement is found between the experimental and the simulated results.

20 February 2020 in IEEE Access
Verified
Journal Article
Open access
KSKamel S. Sultan
Kamel S. Sultan
HAhaythem Abdullah
haythem Abdullah
EAEsmat Adbel-fattah Abdallah
Esmat Adbel-fattah Abdallah
HEHadia S. El-Hennawy
Hadia S. El-Hennawy
This paper exhibits a low profile dual-polarized MIMO antenna with high isolation to meet the requirements of 5G smartphones. The integration between a vertically polarized slot and a horizontally polarized slot is investigated and applied for 28 GHz dual-polarized smartphone antenna. The antenna is combined with metasurface (MTS) to achieve high gain and more directivity. In order to design the metasurface, the characteristic mode analysis is used to investigate the performance of MTS at 28 GHz. The proposed antenna achieves high isolation coefficients better than 40 dB and cross polarization lower than -40 dB from simulated and measured results. The isolation between elements is achieved without any additional decoupling techniques. The proposed MTS slot antenna operates with 4 GHz bandwidth (26-30 GHz) with a realized gain of 11 dBi and efficiency of 90%. Four antennas (with eight ports) are positioned orthogonally at the corners of the mobile PCB to serve MIMO for 5G applications. The effect of MIMO antenna on the human is taken into consideration in power density term. Furthermore, the housing and components of smartphones are taken into our consideration in this paper.