A review of the recently reported moisture diffusivity experimental data in food materials is presented in this work. Values are classified and analysed statistically to reveal the influences of temperature and moisture content. Empirical models relating moisture diffusivity with the above variables, along with relevant graphs for various materials, are included. Other factors affecting moisture diffusivity prediction are also discussed.

The effect of drying method on bulk density, particle density, specific volume and porosity of banana, apple, carrot and potato at various moisture contents was investigated, using a large set of experimental measurements. Samples were dehydrated with five different drying methods: conventional, vacuum, microwave, freeze and osmotic drying. A simple mathematical model was used In order to correlate the above properties with the material moisture content. Four parameters with physical meaning were incorporated in the model: the enclosed water density p_w, the dry solid density p_s, the dry solid bulk density p_bo and the volume shrinkage coefficient β'. The effect of drying method on the examined properties was taken into account through its effect on the corresponding parameters. Only, dry solid bulk density was dependent on both material and drying method. Freeze dried materials developed the highest porosity, whereas the lowest one was obtained using conventional air drying.

Bulk density, particle density, shrinkage and porosity were experimentally determined at various moisture content during air drying for apple, carrot and potato cubes. A simple mathematical model was used to predict the above properties versus material moisture content. Four parameters were incorporated in the model: enclosed water density, dry solids' density, bulk density of dry solids, and volume-shrinkage coefficient. The model was fitted to experimental data satisfactorily, and the parameters were estimated. The influence of varying drying conditions was also investigated.