Laser-induced breakdown spectroscopy has been applied to polymer samples in order to investigate the possibility of using this method for the identification of different materials. The plasma emission spectra of high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyvinyl chloride (PVC), polyethylene terephthalate (PET), and polypropylene (PP) have been studied. Spectral features have been measured—for example, the 725.7 nm chlorine line, the 486.13 mm H β line, and the 247.86 nm carbon line—whose evaluation with neural networks permits identification accuracies between 90 and 100%, depending on polymer type.
11 March 2013 in The Journal of Physical Chemistry C
Laser-induced breakdown spectroscopy (LIBS) was employed for the in situ analysis of pigments used in painting. LIBS spectra were collected from a wide variety of pigments in powder form and in oil color test samples. Appropriate emission lines for the identification of the metallic elements in the pigments examined are proposed. Under optimal experimental parameters, the technique is minimally destructive; two pulses from a laser beam focused on the sample surface result in the formation of a small crater with typical diameter around 40 μm and depth of no more than 10 μm. Furthermore, recording LIBS spectra from successive laser pulses on the same spot of a model oil painting resulted in information regarding the pigment composition of several paint layers, showing the capability of the technique in performing depth profile analysis. Finally, a test case is presented in which an 18th century oil painting, subjected to partial restoration, was examined by LIBS, and the different pigments used in the original and in the restored part of the work were clearly identified. The results of our studies demonstrate the applicability of LIBS in the rapid, in situ, and practically nondestructive determination of pigments in painted artworks.